Ghost Controls Gate Repair in Mentone, CA

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Mentone, CA | Ontario Gate Company

Ghost Controls gate repair in Mentone comes down to one thing most of the time: the solar panel and battery path has cooked in the inland heat, and the operator dies even though the motor’s fine. We’re Ontario Gate Company, an independent gate repair company serving Mentone from the 92359 ZIP code across the Redlands foothill area, with Ghost Controls repair in Redlands also available, and we stock the batteries, charge controllers, arms, and boards to get your Ghost Controls system running again. Call (855) 707-3634 and we’ll diagnose it on-site, not over the phone with guesswork.

Call (855) 707-3634

Why Mentone Residents Choose Us for Ghost Controls Service

We specialize exclusively in gates. That’s the whole trade. When a Ghost Controls swing arm binds or a solar panel stops charging, our technicians arrive already knowing the common failure points of this brand, from the TDS2 heavy-duty single to the AXDP dual-gate accessory kit. Noel Carrasco grew up near the Cucamonga-Guasti Regional Park area of Ontario and has been working gates in the Inland Empire for over two decades. He learned the mechanical and electrical fundamentals through the Industrial Technology program at Chaffey College in Rancho Cucamonga, then spent years turning that classroom foundation into field knowledge across driveways and commercial lots. He built this company around one idea: know what you’re looking at before you touch it. And that’s exactly how we approach every Ghost Controls operator in Mentone.

For Mentone homeowners, the difference matters. We’re familiar with the terrain here, from the larger properties off Highway 38 to the older residential streets down near the Mill Creek wash. When a Ghost Controls gate quits, we don’t need to waste an hour reading the manual. We know these systems at the board, battery, and arm level, and we know what the Mentone sun and wind do to them.

We use Ghost Controls OEM control boards, arms, and harnesses where the unit is serviceable, and quality aftermarket batteries, solar panels, and charge controllers where OEM pricing doesn’t make sense. If the operator is sound but the gate frame, posts, or hinges are the real fault, we tell you straight. Repair the structure before selling you a new motor. That honesty is why Mentone residents call us back.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Mentone

  • Dead gate from solar and battery failure. The operator tests fine, but the charge path has cooked. This is the most common “dead gate” on Mentone’s long rural driveways, where unshaded inland heat bakes the solar panel and battery box until nothing charges. We replace the battery and charge controller and re-aim the panel into full sun.
  • Swing arm binding and limit faults. Gate posts that have gone out of plumb on sloped, settling ground toward the Crafton Hills cause the arm to bind and the limits to fault. The motor and board are usually healthy; the post needs re-setting and re-plumbing.
  • Warped wood gate frames after Santa Ana winds. Wind-fatigued wood frames warp and drag the Ghost Controls arm out of stroke, even when the operator is perfectly fine. We realign the gate and repair the frame so the arm can do its job.
  • Control-box and keypad faults after heat waves. Wind-driven grit and summer heat corrode terminal blocks and cause water intrusion in exposed low-voltage enclosures. We clean or replace terminals, seal the enclosure properly, and get your remote or keypad talking to the board again.
  • Motor repair and battery backup issues. Ghost Controls motors are low-voltage and generally reliable, but when they do fail, it’s often a worn actuator gear or a shot battery backup. We service both, including adding battery backup to systems that don’t have it yet.

Ghost Controls Service in Mentone: What Local Conditions Mean for Your Equipment

Mentone sits in the Crafton Hills’ rain shadow on the dry inland side of the San Bernardino Mountains. That means exterior hardware here bakes and desiccates rather than rusting from coastal moisture. For Ghost Controls owners, this is the critical detail. These systems are low-voltage, solar-friendly designs built for simpler installations, and in Mentone’s heat, the solar panel and battery path fails faster than it would a few miles west in Redlands. The operator tests fine on the bench; the charge path has cooked. We see this exact pattern on the larger hillside lots up toward the Crafton Hills and mountain base, where gates span long, sloped driveways and the ground itself shifts with the seasons.

Then there’s the wind. Santa Ana events come through Mentone with dry, abrasive force, and a wood driveway gate that’s been sun-desiccated for a decade will warp under that load. The Ghost Controls arm then has to fight the frame, not just the gate weight, and the limits fault out. A generic inland-Empire gate page won’t explain this. A generic Ghost Controls page won’t either. But if you live in Mentone, this is exactly what happens to your gate, and this is exactly what we fix.

Ghost Controls Models & Products We Service in Mentone

We service the full Ghost Controls lineup that’s common in Mentone: the TDS2 heavy-duty single swing opener kit, the TSS1 single swing opener, the DTP1 dual swing kit for double gates, and the AXDP dual-gate accessory with solar and battery add-ons. For parts, we keep OEM Ghost Controls boards, arms, and harnesses in stock for the most common Mentone service calls, alongside aftermarket batteries, solar panels, and charge controllers where OEM pricing doesn’t make sense. That local stock means we’re not waiting a week for a part to ship before we can restore your gate to full function. For more on what we cover, see our Ghost Controls sales & service page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Mentone

Ghost Controls gate repair in Mentone typically runs $150 for the diagnostic and service call, with common repairs landing between $200 and $500 depending on what’s failed. A battery and charge controller replacement is usually under $250. If the issue is a warped wood frame that’s pulling the arm out of stroke, the realignment work often runs $300 to $600 because the structure needs repair before the operator can work. We quote every job before any work starts, and the price we give you is the price you pay. A free estimate on-site, with the gate in front of us, is the only honest way to price Ghost Controls work in Mentone. Call (855) 707-3634 and we’ll come out and tell you exactly what you’re looking at.

Serving Mentone, CA — Our Local Coverage Area

We’re based in the Mentone area and know this community well, and we also offer Ghost Controls service in Calimesa. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Mentone

Service Areas Near Mentone

We serve Mentone and the surrounding foothill communities, including Redlands, Yucaipa, Highland, Calimesa, and the mountain-base areas along Highway 38. If you’re in the 92359 ZIP code or nearby, we’ll come out and take a look. See our Mentone service area page for full coverage details. For Ghost Controls-specific work in nearby cities, see Ghost Controls service in Fountain Valley and Ghost Controls service in Good Hope.

Book Your Ghost Controls Service in Mentone Today

If your Ghost Controls gate isn’t opening, closing, or charging right in Mentone, call (855) 707-3634. We’ll come out, diagnose it on-site, and give you a free written estimate before any work starts. Same-day service is available for dead gates on rural driveways. We know what we’re looking at before we touch it; that’s the whole point.

Written by Noel Carrasco, Owner at Ontario Gate Company, serving Mentone, the Redlands foothill area, and Ghost Controls service in Highland.

Need Gate Repair help in Mentone? Licensed & insured · within the hour response · free estimates
Call (855) 707-3634
Areas We Serve

Request a Free Estimate in Mentone

Tell us what you need — Ontario Gate Company responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and consent to being contacted through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch