Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in La Verne, CA
Gate installation in La Verne spans a wider range than almost anywhere else in the San Gabriel Valley. A driveway gate on a 1920s citrus-era bungalow near Old Town demands different footings, hardware, and finishing than an automatic sliding gate on a hillside lot above Foothill Boulevard. That’s the work we do every week at Ontario Gate Company, and it’s why we stock both period-appropriate iron hardware and modern operator systems. If you’re planning a new gate in La Verne, call (855) 707-3634 for a free on-site measure and written estimate.
Why La Verne Homes Are Different
La Verne’s housing stock was built in distinct waves, and each wave brings its own gate problems. Pre-1950s properties near the Old Town core often have original wrought-iron pedestrian and driveway gates. Those gates were built to last, but the hinges, latch posts, and masonry anchors were not designed for 70-plus years of Santa Ana wind loading. We regularly see sagging iron gates where the top hinge has pulled loose from a brick pier, or where the latch no longer lines up because the gate leaf has twisted by half an inch.
The 1960s through 1990s tract homes across north La Verne tend toward wood gates and early automatic operators. Hot, dry summers accelerate wood drying and metal expansion, which causes gate sag and latch misalignment; winter rains swell wood and shift posts in the clay-heavy soils common in this area, leading to seasonal sticking. Hillside and canyon-edge homes need gates engineered for slope stability and wildfire-zone clearance, and the foothill neighborhoods near the San Gabriel Mountains see Santa Ana winds that regularly blow unlatched gates open or twist hinges. We reinforce and replace those gates with wind-rated hardware and adjustable hinges as standard practice.
Styles & brands we work with
Our Main La Verne Services
Most La Verne calls to Ontario Gate Company fall into two categories: gates that have failed mechanically and gates that have lost their automation. Here are the two services La Verne homeowners call about most.
Gate Repair in La Verne
A manual gate that drags, sticks, or won’t latch is a daily frustration and, in some La Verne neighborhoods, a real security concern. Our repair work covers sagging iron gates, rotted wood frames, failed hinges, broken latch hardware, and posts that have shifted in clay soil. We diagnose on-site before quoting, so you know exactly what’s wrong and what it costs before any work begins. See the full scope of our Gate Repair in La Verne service.
Electric Gate Repair in La Verne
When an automatic gate stops responding to the remote, keypad, or loop detector, the problem is rarely the gate itself. It’s the operator, the control board, a safety sensor, or the power feed. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems on-site, and we carry common boards and sensors so we’re not waiting on parts for a week. Read more about our Electric Gate Repair in La Verne work.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in La Verne
New gate installation in La Verne almost always comes down to two questions: what the ground will hold, and what the wind will do. Hillside lots need deeper footings and often a cantilevered or trackless design. Flat lots on clay soil need post bases that won’t heave. We measure the slope, check the soil, and specify the gate and operator together so the system works as one unit rather than a gate with an operator bolted on afterward. That’s the difference between a gate that works for five years and one that needs service every spring. Learn more about our full Gate Installation process.
Automatic Gate Installation
Signs you need it
You’re manually opening and closing a driveway gate daily, or an existing operator is beyond economical repair.
What it costs in La Verne
Automatic gate installation in La Verne typically runs $4,800 – $9,500 for a single swing gate with operator, safety edges, and a basic keypad.
How we do it
We set footings and posts, hang the gate, mount the operator, run power, install safety edges and photoelectric sensors, then program remotes and test full cycles.
Driveway Gate Installation
Signs you need it
Your driveway has no gate and you want controlled access, or an existing gate has rusted through or pulled its posts out of plumb.
What it costs in La Verne
A new driveway gate in La Verne starts around $3,200 for a single manual steel swing gate and reaches $8,000 – $18,000 for automated double gates with intercom.
How we do it
We survey the driveway grade, design the gate width and swing direction around your vehicle turning radius, set posts, hang the gate, and install the latch and stops.
Sliding Gate Installation
Signs you need it
Your driveway slopes sharply or your property line has no room for a swing arc, making a sliding gate the practical choice.
What it costs in La Verne
Track-style sliding gate installation runs $2,500 – $5,000 for manual models and $5,000 – $11,500 with automation, depending on gate length and track prep.
How we do it
We set the track or cantilever rollers, install the gate panel, mount the operator and rack, set the limits, and test the safety reverse system.
What Gate Installation Costs in La Verne
| Item | Typical range in La Verne |
|---|---|
| Manual single swing driveway gate | $2,200 – $4,800 |
| Automated single swing gate system | $4,800 – $9,500 |
| Automated double swing gate system | $8,000 – $18,000 |
Does a new gate installation include the operator and safety sensors?
Yes. Our automatic gate installations include the operator, safety edges or photoelectric sensors, and remote programming. We never quote a gate without the safety hardware required to meet current standards. Call (855) 707-3634 for a written quote broken down by line item.
How long does a La Verne gate installation take?
Most single gate installations take one to two days from footing to final programming. Hillside lots with deeper footings or clay soil that needs over-excavation can add a day. We confirm the schedule on the measure visit.
Brands We Service in La Verne
We specialize exclusively in gates, and that focus shows up in the brands we stock and service. In La Verne we regularly work on Viking, Ghost Controls, DoorKing, and Elite operators, among others. Because our trucks carry common boards, sensors, and remote kits for these systems, most electric gate repairs are completed the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in La Verne, CA
| Service | Typical range in La Verne |
|---|---|
| Manual gate repair (hinges, latch, alignment) | $200 – $550 |
| Electric gate diagnostic visit | $150 – $300 |
| Control board replacement | $450 – $1,100 |
| Operator motor replacement | $650 – $1,500 |
| Safety sensor or loop detector replacement | $250 – $600 |
| Manual single swing driveway gate installation | $2,200 – $4,800 |
| Automated single swing gate system | $4,800 – $9,500 |
| Automated double swing gate system | $8,000 – $18,000 |
| Sliding gate (manual) | $2,500 – $5,000 |
| Sliding gate (automated) | $5,000 – $11,500 |
In La Verne, prices push higher when a gate sits on a hillside that needs retaining work, when the property is on clay soil that requires over-excavated footings, or when the existing gate is vintage ironwork that needs custom fabrication. Every quote is written, itemized, and agreed before any work starts, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in La Verne
We cover all of La Verne, from the historic blocks near Old Town to the foothill streets climbing toward the San Gabriel Mountains. Typical response for repair calls in La Verne is same day or next morning depending on call volume.
- Old Town La Verne
- North La Verne foothills
- Lordsburg area
- Heritage Park neighborhood
- Live Oak Canyon area
Service Area – Cities Near La Verne
Ontario Gate Company serves La Verne and the surrounding San Gabriel Valley communities. If you’re in a neighboring city, we likely cover you too. We regularly work in Claremont, CA, Pomona, CA, Montclair, CA, and Upland, CA. Call (855) 707-3634 to confirm service in your area.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in La Verne
In most La Verne cases, a standard driveway gate on an existing property does not require a building permit, but hillside or retaining-wall work can trigger review. We check with the City of La Verne on your behalf and handle any paperwork needed before work begins.
For a gate that won’t close or secure, we aim for same-day response in La Verne. Morning calls almost always get a same-day visit. We can’t guarantee a specific hour, but we’ll confirm a window when you call (855) 707-3634.
No. We provide free on-site estimates for gate installation and repair in La Verne. The measure visit is also where we confirm access, slope, and soil conditions so the written quote reflects what will actually happen on install day.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Verne Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker