Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Eastvale, CA
Gate installation in Eastvale usually means replacing a builder-grade side yard or driveway gate that was installed when the tract was built, typically between 2000 and 2015. Most of these original gates were never sealed, never reinforced, and mounted on posts set in the clay-heavy soil that shifts every winter. Ontario Gate Company installs new gates sized to Eastvale’s specific lot layouts, with post settings and hardware chosen for the inland Riverside County climate. Call (855) 707-3634 for a free measure and written quote.
Why Eastvale Homes Are Different
Eastvale incorporated in 2010, and nearly all of its housing stock dates from the 2000s through the 2020s, built by large production builders across master-planned tracts. That has a direct effect on gate work. The original gates are almost never custom ironwork. They’re builder-grade wood or vinyl inserts hung between the shared block walls that separate side yards, or simple tubular steel driveway gates on operator posts. These gates were installed quickly, often without weather sealing, and the hardware was entry-level.
The climate does the rest. Summers in the 92860 ZIP routinely push past 95 degrees with single-digit humidity, which splits unsealed wood pickets and makes vinyl hardware brittle enough to crack under normal use. The soil here is clay-rich and expansive. Winter rain swells it, summer heat shrinks it, and gate posts that were set too shallow slowly lean out of plumb. The signature Eastvale gate call is a side gate that no longer latches because the post has moved half an inch and the gate drags on the concrete. These are first-failure jobs. The house is 15 years old, and the original gate is done.
Styles & brands we work with
Our Main Eastvale Services
Homeowners in Eastvale call us most often for two things: a gate that won’t swing or latch correctly, and an automatic operator that stopped responding. Both jobs start with an on-site diagnosis, because the cause is rarely what the symptoms suggest.
Gate Repair in Eastvale
Most repair calls in Eastvale start as a sagging gate or a latch that won’t catch. On newer tract homes, the usual culprits are rotted wood posts, rusted builder-grade hinges, or posts that have shifted in the clay soil. We replace failed hardware with heavier-duty parts, reset posts where the foundation allows, and rebuild gate frames when the wood has split beyond a simple fix. We carry hinge sets, latch hardware, gate wheels, and post anchors sized for the gates common in 92860. Gate Repair in Eastvale covers the full scope and local pricing.
Electric Gate Repair in Eastvale
Electric gate repair is our core trade, not a side service. On Eastvale driveway gates, the operator is usually a residential swing or slide unit from one of the major brands, and the failure point is often the control board, a limit switch, or a safety sensor knocked out of alignment. We arrive with diagnostic equipment set up for gate operators specifically, identify the failed component, and quote the repair before any work begins. Electric Gate Repair in Eastvale details common failures and repair pricing for the area.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Eastvale
Gate installation in Eastvale is rarely a first-time project on a brand-new lot. It’s a replacement, and that changes how we approach it. The original gate has usually failed in a way that tells us something about the post footing, the concrete pad, or the orientation of the opening itself. We size the new gate to the existing opening when the structure is sound, and when it isn’t, we reset or replace the posts rather than hanging a new gate on a failing foundation. The dry heat and clay soil in 92860 mean we specify hardware and materials that won’t repeat the builder’s mistakes. Whether the project is a full automatic gate system or a simple manual side gate, the measure is free and the price is fixed in writing before work starts. See Gate Installation for the full service scope.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand multiple times a day, or an existing operator has failed and repairs no longer make economic sense.
What it costs in Eastvale
Automatic gate installation in Eastvale typically ranges from $2,800 to $9,500 depending on gate size, operator type, and the power and safety devices required.
How we do it
We measure the opening, verify post strength and plumb, spec the operator and safety sensors for the gate’s weight and swing or slide direction, then install the gate, operator, wiring, and safety devices and program remotes and keypads.
Electric Gate Installation
Signs you need it
A manual gate on a driveway that carries daily vehicle traffic is a security gap and a physical hassle every time you leave or return.
What it costs in Eastvale
Electric gate installation in Eastvale typically runs from $3,200 to $8,000 for a complete system with operator, safety edges or photocells, and one or two remotes.
How we do it
We run conduit and power to the gate location, mount the operator on the appropriate post or pad, hang and align the gate, install safety devices, and program the control system with remotes and keypads.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted, sagging, or too narrow for the vehicles you actually drive, and repairing it would leave you with the same limitations.
What it costs in Eastvale
Driveway gate installation in Eastvale typically costs between $2,500 and $7,500 depending on gate material, width, and whether automation is included at the time of install.
How we do it
We check the driveway slope, concrete pad, and post depth, then build or order a gate sized to the opening, set posts as needed, and install the gate with hardware rated for the gate’s weight and daily cycle count.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or the opening is too tight for a swing gate to operate without hitting a vehicle or the house.
What it costs in Eastvale
Sliding gate installation in Eastvale typically ranges from $3,500 to $10,000 including the track or cantilever system, gate, and operator if automated.
How we do it
We spec the slide direction and track or cantilever hardware, pour or verify the track bed, set the gate on its rollers or trucks, install the operator and safety devices, and test full travel under load.
What Gate Installation Costs in Eastvale
| Item | Typical range in Eastvale |
|---|---|
| Manual side yard gate (wood or vinyl) | $400 – $1,500 |
| Manual driveway gate (steel or aluminum) | $1,500 – $4,500 |
| Automatic gate system with operator | $2,800 – $9,500 |
How long does gate installation take in Eastvale?
Most Eastvale installations finish in one to two days. A simple manual side gate is same-day work; an automatic driveway system with power run and safety devices usually takes two days, including programming and testing.
Do I need an HOA approval to replace my gate in Eastvale?
Many Eastvale tracts have HOA design guidelines that apply to driveway gates visible from the street. We’ll provide the spec sheet and product details your HOA asks for, and we’ll hold the install date until you have written approval if your community requires it. Call (855) 707-3634 to start the measure.
Brands We Service in Eastvale
We service and install gate operators from Viking, Ghost Controls, DoorKing, and Elite, among others. Because we work on these brands daily, we know their common failure points, and our techs carry the control boards, sensors, and remote kits that keep Eastvale repairs moving in a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Eastvale, CA
| Service | Typical range in Eastvale |
|---|---|
| Gate repair service call and diagnosis | $75 – $150 |
| Hinge or latch replacement | $150 – $400 |
| Gate sag repair and realignment | $200 – $600 |
| Post reset or replacement | $400 – $1,200 |
| Electric gate repair (minor, no parts) | $150 – $350 |
| Electric gate repair (major component) | $400 – $1,500 |
| Manual side yard gate installation | $400 – $1,500 |
| Manual driveway gate installation | $1,500 – $4,500 |
| Automatic gate installation | $2,800 – $9,500 |
| Electric gate installation | $3,200 – $8,000 |
In Eastvale, prices push toward the upper end when the post footing has to be re-poured in clay soil, when an existing operator’s wiring was never run in conduit, or when HOA specs require a specific gate material or finish. Whatever the job, the quote is agreed in writing before we touch a tool, and the number we quote is the number you pay.
Neighborhoods We Serve in Eastvale
We work throughout the 92860 ZIP and the tract communities that make up Eastvale. Most of our jobs are in the newer developments east of Hamner Avenue and south of Limonite, where the housing stock is the newest and the original gates are reaching first-failure age.
- Eastvale Gateway area
- Leal Ranch
- River Glen
- Enclave
- Sendero
Response time across Eastvale is usually same-day or next-day for repair calls, depending on the schedule when you call.
Service Area – Cities Near Eastvale
Ontario Gate Company runs repair and installation crews to Eastvale and the surrounding Inland Empire cities. Homeowners just across the city line often call us from Norco, CA, Home Gardens, CA, Corona, CA, and Jurupa Valley, CA, where the housing and soil conditions are similar and the gate failures follow the same pattern.
Serving Eastvale, CA — Our Local Coverage Area
We’re based in the Eastvale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Eastvale
We schedule repairs across Eastvale same-day or next-day in most cases. Safety failures like a gate that won’t stay open or an operator running without stopping get priority. Call (855) 707-3634 and we’ll give you a real arrival window, not a four-hour range.
Most gate replacements and repairs don’t require a city permit, but automatic driveway gates can trigger building code requirements for safety devices and power connections. We handle the technical compliance and will tell you upfront if your project needs a permit. HOA approval, when it applies, is the homeowner’s responsibility, and we’ll supply whatever documentation your HOA requests.
Yes. We work across the entire 92860 ZIP, from the older tracts near the 15 freeway to the newest developments on the east side of the city. There’s no trip-charge surprise for Eastvale addresses, and the quote you get on the phone is the basis for the written estimate on site.
If your Eastvale gate is failing, call (855) 707-3634 for a free estimate. We’ll tell you what’s wrong, what it costs to fix or replace, and when we can be there. The quote is fixed before work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Eastvale Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez