Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Upland, CA | Ontario Gate Company
We repair Ghost Controls gate operators throughout Upland (91784, 91785, 91786), and most calls come down to one of two things: the opener failed, or the gate itself failed and took the opener down with it. Our technicians diagnose the whole system, not just the box. If your Ghost Controls swing or slide gate is faulting, dead, or moving erratically, call (855) 707-3634 for a free estimate.
We’re Ghost Controls sales & service specialists who work on these low-voltage operators weekly. Upland’s mix of flatland tract homes and foothill slope lots means the same Ghost Controls kit fails for very different reasons depending on where you live. That local knowledge shortens the diagnostic time considerably.
Why Upland Residents Choose Us for Ghost Controls Service
We work exclusively on gates. Not fences, not garage doors, not general contracting. That focus matters when a Ghost Controls operator starts acting up, because the problem is rarely just the motor. It’s the hinge post that shifted after a Santa Ana. It’s the solar panel that’s been shaded since the neighbor’s tree grew in. It’s the arm geometry that was never quite right on a sloped driveway.
Noel Carrasco grew up near the Cucamonga-Guasti Regional Park area and has been working gates in the Inland Empire for over two decades. He learned the electrical and mechanical side of the trade through the Industrial Technology program at Chaffey College in Rancho Cucamonga, then built Ontario Gate Company around a simple principle: know what you’re looking at before you touch it. That’s why our techs show up with Ghost Controls-compatible components on the truck and the experience to know when the opener is fine and the post is the real fault.
As an independent gate company, we’re not affiliated with Ghost Controls. We stock OEM-compatible control boards, arms, battery components, and charge controllers, plus quality aftermarket hinges and brackets for wind-loaded Upland gates. You get the part that fits, not whatever’s on the shelf.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Upland
- Santa Ana wind damage to hinges and posts. Fall winds funnel down the San Gabriel canyons and hit foothill side-yard gates hard. Hinges shear, posts pull loose, and the Ghost Controls arm goes out of stroke, so the opener faults on obstruction even though the board tests fine.
- Rust-seized hinges and ground-level hardware. Morning foothill damp and winter rain accelerate rust on original wrought-iron gates, especially at the bottom hinge pivots. A seized hinge binds the arm and mimics a bad motor or control board. We free or replace the hardware before condemning the operator.
- Warped gate leaves tripping reverse sensors. Dry Upland summers bake wood driveway and side-yard gates until the leaf no longer sits square. The Ghost Controls limit and reverse sensors see the misalignment as an obstruction and stop the cycle mid-travel.
- Solar panel and battery degradation. Hillside lots with shade cover and long sloped driveways put real strain on solar-charged Ghost Controls kits. Voltage sag from a weak battery or underperforming panel kills an otherwise healthy operator, especially in winter when sun angles drop.
- Arm-geometry issues on sloped runs. Gates mounted on graded slopes or retaining-wall posts rarely match the installation geometry in the manual. The Ghost Controls arm binds or over-strokes, and recalibration after post repair makes the difference between years of service and repeat failures.
Ghost Controls Service in Upland: What Local Conditions Mean for Your Equipment
Upland’s footing matters more than most homeowners realize. Gates on the graded foothill lots in 91784 sit on slope-side and retaining-wall-mounted posts that take canyon-mouth Santa Ana gusts head-on, while flatland tract gates a mile south mostly just sag at the hinge. Same Ghost Controls operator, two very different root causes. A technician who doesn’t know the difference will swap a control board on a flatland gate and leave the real problem intact, or replace a perfectly good operator on a foothill gate when the post needed concrete work. We ran into this on a wind-facing side-yard gate up in the foothill streets below the San Gabriels (91784). A homeowner’s Ghost Controls swing kit kept reversing mid-travel after the first fall Santa Ana. We found the hinge post pulled loose and a sheared hinge leaf, not a bad board. We re-set the post in concrete, replaced the hinge set, re-squared the leaf, and re-calibrated the arm so the Ghost Controls operator stroked clean through a full cycle. That repair held because we treated the gate as the system, not the opener as the problem.
This wind-and-slope reality also means Upland’s dry-wet seasonal swing drives predictable failure patterns. Wind damage peaks in fall. Rust and rot accelerate through winter rains. Summer heat warps wood and stresses lightweight metal frames. We see the same cycle year after year on foothill streets off the base of the San Gabriels and on the original mid-century ranch gates throughout the flatlands.
Ghost Controls Models & Products We Service in Upland
We service the full Ghost Controls residential lineup: Heavy-Duty Single Swing kits (AXS/ABT-series, dual-gate capable), Standard-Duty Single Swing operators, residential slide gate operators, and solar-charged configurations with battery backup, keypads, and intercoms. Our approach on parts is straightforward. We use Ghost Controls-compatible OEM control boards, arms, and battery/charge components where they’re the right fit, and quality aftermarket hinges, brackets, and keypads where they hold up better on wind-loaded Upland gates. We stock the common components locally so we can get most Upland repairs done in one trip.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Upland
Ghost Controls gate repair in Upland typically runs $180 to $340 for hinge replacement, arm recalibration, or sensor alignment, with post re-setting in concrete falling in the $300 to $600 range due to excavation and curing time. Solar panel or battery replacement usually lands between $150 and $400 depending on panel wattage and battery capacity. Full operator replacement with a new Ghost Controls kit and installation typically runs $900 to $1,800. Here’s the breakdown:
- Diagnostic service call: $75 to $125 (credited toward repair if you proceed)
- Hinge replacement and arm recalibration: $180 to $340
- Solar panel or battery replacement: $150 to $400
- Post re-set in concrete (slope-side or wind-damaged): $300 to $600
- Full operator replacement with new Ghost Controls kit: $900 to $1,800
Every quote is discussed and agreed before any work starts. No surprises on the invoice. Call (855) 707-3634 for a free estimate on your specific gate.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Upland
Usually not. What you’re describing is typically a hinge post that pulled loose or a hinge leaf that sheared when the wind hit the gate broadside. The Ghost Controls operator sees the misaligned travel as an obstruction and faults. We diagnose on-site: if the board tests fine and the post is loose, you need post and hinge work, not a new opener. Call (855) 707-3634 and we’ll tell you what’s actually wrong.
Voltage sag, almost always. Shade from foothill terrain or nearby trees reduces panel output, the battery never reaches full charge, and the operator browns out mid-cycle even though the motor itself is healthy. We test the panel output and battery under load, then replace the component that’s actually failing rather than condemning the whole system. Estimates are free.
In most Upland cases, yes. The opener is usually fine; the gate leaf has warped enough that the arm is fighting the misalignment and tripping the reverse sensors. We re-square the leaf where possible, replace hinges and brackets as needed, and recalibrate the arm stroke. You keep your Ghost Controls operator. Call (855) 707-3634 for a free assessment.
Yes. Ghost Controls keypads and intercoms are add-on components designed for the existing control board, and we install and program them as part of our Ghost Controls sales & service work. We can also integrate a new battery backup if your Upland hillside lot has unreliable power or heavy shade on the solar panel.
We’re an independent gate company, not authorized, sponsored, or endorsed by Ghost Controls. We cannot process Ghost Controls warranty claims directly. What we can do is diagnose the full gate system accurately, use Ghost Controls-compatible OEM parts where they’re the right fit, and tell you honestly when a repair beats replacement and when a warranty claim through Ghost Controls is your better path. Call (855) 707-3634 and we’ll give you a straight answer.
Service Areas Near Upland
We serve Upland and the surrounding foothill and flatland communities including Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, and La Verne. If you’re just over the city line, check our Upland service area page for details. You can also find us in Ghost Controls service in Montclair and Ghost Controls service in Chino.
Book Your Ghost Controls Service in Upland Today
If your Ghost Controls gate is faulting, binding, or dead, we can usually get a technician to your Upland property the same day for repair work. Call (855) 707-3634 for a free estimate. We’ll diagnose the whole gate, explain exactly what’s wrong, and quote the fix before we start.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Upland since 2003.