Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Costa Mesa, CA
Gate installation in Costa Mesa usually runs $2,800 – $9,500 for a complete automatic driveway gate, and the work here carries a set of local conditions most gate companies never mention. The city’s 1950s and 60s tract homes on the east side and the older, tighter lots west of the 55 were built around narrow driveways and carports, so most installations involve custom-cut panels and operators aligned to within an inch of a block wall or side-yard fence line. Ontario Gate Company has served Costa Mesa since 2011, and we work exclusively on gates. Call (855) 707-3634 for a free estimate on any gate installation or repair.
Why Costa Mesa Homes Are Different
Costa Mesa’s housing stock leans heavily on the post-WWII building boom: small single-story stucco tract homes with single-car garages and carports, plus a layer of 1970s and 80s apartments and townhomes near South Coast Metro. The gates on these properties tend to be older wrought-iron, chain-link with privacy slats, or wood picket, and they’re usually mounted to block walls or posts that have been in the ground for fifty or sixty years. By the time we’re called, the post has shifted, the hinges have sagged, and the gate is dragging across the driveway. Installation in Costa Mesa is rarely a fresh start. It’s a retrofit.
The marine layer is the other constant. Mornings here come with fog and salt air off the Pacific, and that damp settles into steel hinges, latches, and operator housings. Steel hardware that would last a decade inland rusts through in a few years in 92626 and 92627. When we install a gate in Costa Mesa, we default to stainless or galvanized hinge sets and sealed operator enclosures, and we tell clients to expect a repaint or reseal every few years. It’s a maintenance rhythm inland cities don’t deal with. The mild weather also means gates cycle year-round, so the hardware wears faster, and the Santa Ana winds that push through in fall will dry and warp wood panels that fit perfectly in June. Any installation that ignores those two forces, damp and shrink, will bind within a season or two.
Styles & brands we work with
Our Main Costa Mesa Services
Costa Mesa homeowners and property managers call us most often for two things: a gate that won’t open or close, and an electric operator that has stopped responding. Both are covered below, and each has its own Costa Mesa page with full pricing and local detail.
Gate Repair in Costa Mesa
A sagging gate, a latch that won’t catch, a hinge that’s torn out of the post, a wheel that’s ground flat on the concrete. These are the calls we take in in 92626 and 92627 every week. The marine-layer damp keeps rust working on older steel gates, and the shifting block walls from sixty-year-old construction knock posts out of alignment. We reset hinges and posts, straighten frames, replace wheels and rollers, and get the gate back swinging or sliding clean. For the full breakdown of what repair costs in Costa Mesa and the most common failures we see, read our Gate Repair in Costa Mesa page.
Electric Gate Repair in Costa Mesa
When an operator hums but the gate doesn’t move, or the remote stops working, the problem is typically in the control board, the motor, the loop detector, or a safety sensor that has drifted out of alignment. We diagnose on-site with the operator in front of us, and we carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Salt air near the Back Bay is hard on exposed operator hardware, so we check the enclosure seal on every electric repair. Details and pricing live on our Electric Gate Repair in Costa Mesa page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Costa Mesa
Gate installation in Costa Mesa usually means fitting a new gate into an opening that was never designed for automation. The older east-side tract homes in 92626 and the tighter lots west of the 55 in 92627 have narrow side yards and carports, not wide modern driveways, so the panel often has to be custom-cut and the operator mounted in a clearance of only a few inches. Add the marine-layer rust and the seasonal shrink from Santa Ana winds, and a standard off-the-shelf install will fail. We measure the opening, check the posts or block wall, and build the system around what’s actually there. That’s the whole service. If you’re starting from scratch or replacing an old manual gate, see our full Gate Installation page for what a complete project includes.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual gate, or you want controlled access to a driveway, carport, or side yard that currently has none.
What it costs in Costa Mesa
Automatic gate installation in Costa Mesa typically runs $3,800 – $9,500 for a complete swing or slide system, including the operator, panel, and controls.
How we do it
We measure the opening and the side clearances, check the existing posts or wall for plumb and strength, set or reinforce the mounting points, hang and align the panel, then wire the operator, safety sensors, and access controls and test the full cycle repeatedly.
Sliding Gate Installation
Signs you need it
Your driveway slopes or has a short setback that makes a swinging gate impractical, or you want a wider opening without the arc space a swing gate needs.
What it costs in Costa Mesa
Sliding gate installation in Costa Mesa typically runs $4,500 – $9,500 for a motorized slide gate with track or cantilever hardware and an operator.
How we do it
We set the track or cantilever rollers on a level run, hang the panel, install the rack and operator, then align the guide rollers and safety edges so the gate travels smoothly without binding on the narrow lots common here.
What Gate Installation Costs in Costa Mesa
| Item | Typical range in Costa Mesa |
|---|---|
| Complete automatic gate system (residential) | $3,800 – $9,500 |
| Sliding gate with operator | $4,500 – $9,500 |
| Basic manual gate install (no operator) | $1,200 – $3,200 |
Do I need a permit for a new automatic gate in Costa Mesa?
Most residential gate replacements on existing posts don’t require a permit, but new electrical runs and any gate on a commercial property or street-facing access point often do. We handle the permit check before work starts and tell you exactly what Costa Mesa will require for your specific property.
Can you install a gate on a narrow Costa Mesa driveway?
Yes. We work within clearances as tight as a few inches by custom-cutting panels and selecting operators sized to the actual opening. Most 92626 and 92627 side yards can take a compact slide or swing system, and we’ll confirm feasibility during the free site measure.
Brands We Service in Costa Mesa
We repair and install operators from BFT, Linear, Viking, and Ghost Controls, among others. Our Costa Mesa trucks carry common control boards, remotes, safety sensors, and limit switches for these brands, so most repairs finish in a single visit. See our brands page for the full list of systems our technicians are trained on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Costa Mesa, CA
| Service | Typical range in Costa Mesa |
|---|---|
| Gate repair (general) | $150 – $600 |
| Automatic gate repair | $250 – $950 |
| Electric gate repair | $250 – $950 |
| Gate opener repair | $250 – $950 |
| Automatic gate installation | $3,800 – $9,500 |
| Sliding gate installation | $4,500 – $9,500 |
| Electric gate installation | $3,800 – $9,500 |
| Driveway gate installation | $3,800 – $9,500 |
| Basic manual gate install (no operator) | $1,200 – $3,200 |
| Gate opener installation | $900 – $2,100 |
| Electric gate opener installation | $900 – $2,100 |
| Driveway gate opener installation | $900 – $2,100 |
In Costa Mesa, prices push toward the higher end when the existing posts are rusted or shifted and need to be re-set, or when the marine layer has corroded the old hardware beyond reuse and we’re replacing hinges, brackets, and the operator housing together. Whatever the number, we quote it and you approve it before any work starts. No surprises on the invoice.
Neighborhoods We Serve in Costa Mesa
We work across all three Costa Mesa ZIP codes: 92626 on the east side, 92627 west of the 55, and 92628 near South Coast Metro. Our trucks are typically in the city within one business day, and most diagnoses happen on-site the same visit.
- Mesa Verde (92626)
- College Park (92626)
- Westside Costa Mesa (92627)
- Eastside Costa Mesa (92627)
- South Coast Metro (92626)
Service Area – Cities Near Costa Mesa
Our Costa Mesa service area extends into the neighboring cities where homeowners and property managers deal with the same marine-layer rust and aging gate hardware. We also serve Newport Beach, CA along the coast, Fountain Valley, CA to the north, Huntington Beach, CA along the Pacific, and San Joaquin Hills, CA to the south.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Costa Mesa
Most non-emergency calls are scheduled same-week, and a gate that’s stuck open or stuck closed is treated as an urgent call. Call (855) 707-3634 and tell us what’s happening. We’ll tell you honestly when a technician can be there.
Some do, especially in the planned communities and condo complexes around South Coast Metro. If your property has an HOA, we recommend checking the architectural guidelines before you pick a gate style. We’re used to working within those requirements and can install to the approved spec.
Yes. We service both residential and commercial gate systems, including slide operators, loop detectors, safety edges, and access-control integration. The same gate-only focus applies to every job, from a side-yard pedestrian gate to a full commercial driveway operator.
Call Ontario Gate Company at (855) 707-3634 for a free estimate on gate installation, repair, or electric gate work in Costa Mesa.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Costa Mesa Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Beatriz Salazar"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Alma Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Yusuf Aziz