Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lake Arrowhead
Electric gate repair in Lake Arrowhead almost always comes down to one of three things: a plow clip, a frost-heaved post, or an operator that gave out after a hard winter. Most jobs run $285 – $620 for parts and labor, and we can typically have a technician at your property within 48 – 72 hours of your call. If your gate won’t open, sags, or makes a grinding noise when the motor runs, call us at (855) 707-3634. We work on residential swing gates, wide acreage gates, and commercial slide operators across the 92352 zip code.
Why Ontario Gate Company Is Lake Arrowhead’s Preferred Electric Gate Repair Company
We specialize exclusively in gates. Not fences, not garage doors, not general contracting. Every technician on our team works on gate operators, gate motors, control boards, loop detectors, and safety sensors every single day. When we arrive at a property off Grass Valley Road or near Lake Arrowhead Village, the diagnosis is usually on-site and quick, because we’re already familiar with the failure patterns of the equipment on these mountain lots.
Noel Carrasco built our company around a simple idea: a gate repair crew should show up knowing your operator’s common failure points before they touch a tool. That’s why we stock parts and diagnostic equipment for LiftMaster, Viking, Ghost Controls, DoorKing, and Elite rather than ordering parts after we see your gate. For Lake Arrowhead customers, that means fewer return visits and a gate that’s back in operation sooner, even after a heavy snow.
We’re not a fence company that happens to also fix gates. Gate repair is the only thing we do, and it shows in how quickly we can get your property secured again.
Styles & brands we work with





Commercial Gate Operator in Lake Arrowhead
Commercial Gate Operator repair in Lake Arrowhead usually means a slide gate on a business entrance, an HOA gate, or a heavy bar gate on an acreage property that sees real traffic. These systems use industrial operators from brands like LiftMaster, Viking, and DoorKing, and they fail differently than residential operators. A commercial slide operator that’s been run 200 times a day will wear out limit switches, drive chains, and wheel assemblies long before the motor itself dies.
Most commercial gate operator repairs in Lake Arrowhead run $450 – $1,400 depending on the operator type, the failure point, and whether we’re replacing a control board or rebuilding the mechanical drive. The process starts with a full on-site inspection: we check line voltage, amperage draw, loop detector response, safety edge function, and the track condition. Then we give you a written quote before any work starts. No surprises on the invoice.
We also service operator systems tied to access control, including keypads, telephone entry, and vehicle loop detectors. If your business gate won’t respond to a card reader or your HOA gate stays open after a truck passes, that’s an access integration problem, not just a mechanical one. We diagnose and repair both on the same visit.
Slide Gate Track Alignment and Wheel Replacement
Slide gates on sloped or uneven lots in Lake Arrowhead frequently run off their track after a freeze-thaw cycle moves the ground. We re-align tracks, replace worn wheels, and adjust the drive chain or belt tension so the operator isn’t fighting the gate’s weight.
Loop Detector and Access Control Repair
When your gate stops recognizing vehicles or keypad codes, the problem is usually a failed loop detector, a damaged wire, or a control board that’s lost its programming. We test each component on-site and replace only what’s actually broken.
Gate Opener Repair in Lake Arrowhead
Gate Opener Repair in Lake Arrowhead covers the motor, gear assembly, arm, and control board that actually move your gate. On residential properties, openers fail most often after a gate has been forced open by a plow blade or after the gate itself has sagged enough to make the opener work against the weight of the gate rather than with it.
Residential gate opener repair in Lake Arrowhead typically runs $220 – $580. That includes diagnostic time, parts, and the repair itself. The more common the opener brand, the faster we can complete the job, because our service vehicles carry parts for LiftMaster, Ghost Controls, Mighty Mule, FAAC, and BFT operators. If your opener is a solar-powered unit on a remote gate, we’ll also check panel output and battery condition before condemning the motor.
Sometimes the opener isn’t the real problem. In Lake Arrowhead, a gate that binds or groans in winter may have a hinge post that’s moved with the freeze-thaw cycle. We’ll inspect the post footing and hinge hardware before we open the operator, because installing a new motor on a gate that doesn’t swing freely just burns out the next motor too.
Solar-Powered Opener Diagnosis
On remote lots without AC power, solar gate openers from Ghost Controls and Mighty Mule do the heavy lifting. We test panel voltage, battery health, and charge controller output on-site, then repair or replace the failed component so the gate opens reliably, even on short winter days when sunlight is scarce.
Remote Control and Keypad Programming
If your remote stopped working but the gate still opens from the wall button or keypad, the issue is usually a lost transmitter code or a dead battery, not a motor failure. We reprogram remotes, replace keypad batteries, and sync new devices to your existing operator on the same visit.
Trusted Brands We Service in Lake Arrowhead
Most Lake Arrowhead properties run operators from LiftMaster, Viking, Ghost Controls, DoorKing, or Elite, and our techs are trained on the failure points of each one. A Viking slide operator wears differently than a Ghost Controls swing arm, and the diagnostic approach is not the same. We keep common boards, remotes, safety sensors, and gear kits on our trucks so we can complete most repairs in a single visit rather than coming back days later with an ordered part. If you tell us your operator’s make and model when you call, we’ll bring the right parts with us.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Lake Arrowhead Homes
- Frost-heaved gate posts. Freeze-thaw cycles push posts out of vertical, which makes the gate sag and bind against the operator. We reset the post in concrete and correct the gate’s alignment before the opener burns itself out.
- Plow-clipped swing arms. Snow plows on narrow, tree-lined roads around the lake frequently catch low swing gate arms and bend or snap them. We straighten or replace arms and re-align the gate to its closed travel.
- Solar panel and battery failures. At 5,000 feet, winter days are short and panels get covered in snow. Batteries discharge and gates stop responding. We test the whole solar system, not just the operator.
- Worn hinge assemblies on heavy farm gates. Wide gates on acreage entrances put enormous stress on hinges. When a hinge wears, the gate drops and strains the motor. We replace hinges and reinforcement plates before the operator fails completely.
At 5,000 feet, Lake Arrowhead gates face freeze-thaw cycles that heave post footings and crack hinges, so repairs often need to address the footing and hinge post before fixing the operator. This is a problem far less severe in lower-elevation neighboring towns like Highland or Muscoy, which means a generic gate repair approach that works in San Bernardino won’t hold up here. You need a crew that knows what winter does to metal and concrete on a mountain slope.
Pricing for Electric Gate Repair in Lake Arrowhead, CA
Here are typical price ranges for Electric Gate Repair in Lake Arrowhead based on the work we perform most often:
- Gate opener replacement: $350 – $780
- Control board replacement: $260 – $550
- Safety sensor repair or replacement: $120 – $280
- Hinge post reset after frost heave: $400 – $900
- Swing arm replacement (plow damage): $180 – $420
- Complete residential swing gate system: $2,800 – $6,500 installed
Your final price is quoted and agreed before any work starts, always. Estimates are free, so call (855) 707-3634 and we’ll give you a written number you can hold us to.
We Also Serve Cities Near Lake Arrowhead
While this page is about Electric Gate Repair in Lake Arrowhead, our service area extends to the surrounding mountain and foothill communities. We regularly run calls to Crestline, Running Springs, Highland, and Muscoy. If your property is on the way up or down Highway 18, 173, or 330, we can usually schedule your repair alongside our existing Lake Arrowhead route, which often means a faster visit.
Serving Lake Arrowhead, CA — Our Local Coverage Area
We’re based in the Lake Arrowhead area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Arrowhead
Electric gates in Lake Arrowhead fail more in winter because freeze-thaw cycles physically move the ground under the gate posts, shift hinges, and put gates out of alignment, which forces the operator to work harder until it fails. Add plow damage and short solar charging days on top of that, and winter becomes the busiest season for gate repairs in the entire 92352 area. The fix is usually a combination of resetting the post and replacing the worn opener component, not just one or the other.
Yes, we repair solar gate openers on remote Lake Arrowhead properties regularly. Most solar openers in this area are Ghost Controls or Mighty Mule units, and the most common failures are discharged batteries, snow-covered panels, and faulty charge controllers. We test the entire solar system, replace what’s failed, and verify the gate operates reliably before we leave. Call (855) 707-3634 and we can schedule a visit.
The most common gate repair after a snowstorm in Lake Arrowhead is a plow-clipped swing arm or a post shifted by frost heave, especially on narrow, tree-lined lanes around the lake where plow drivers have little room to maneuver. We usually replace the arm, reset the post, and re-align the gate on the same visit, so your property isn’t left open while the ground refreezes.
Yes, we service heavy-duty operators for wide farm gates on acreage properties around Lake Arrowhead. These are typically LiftMaster or Viking bar gate and swing gate operators mounted on gates 16 to 30 feet wide, and they require more powerful motors, stronger hinges, and regular maintenance on the gear assembly. We stock heavy-duty parts for these operators and can usually complete repairs on the first visit.
We fix a sagging gate caused by frost heave by first stabilizing the footing: the post is removed, the hole is deepened, and the post is reset vertically in fresh concrete. Once the post is solid, we correct the gate’s alignment and replace any worn hinges or reinforcement plates. Only then do we test the opener, because fixing the operator on a gate that isn’t level is a temporary repair at best.
Call (855) 707-3634 for a free estimate on any electric gate repair in Lake Arrowhead. We’ll give you an honest diagnosis, a written price, and a gate that works through the next storm.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Lake Arrowhead gate repair and electric gate repair across the San Bernardino mountains.