Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Ontario, CA
When a gate stops working in Ontario, you don’t have time to wait on a general contractor who figured out gates as a side business. You need someone who already knows the Windcatcher-style tract runs of the north side, how 50 mph gusts off the Cajon Pass twist a vinyl privacy panel in half, and which operator brands get cooked inside a stucco enclosure in June. Ontario Gate Company has served Ontario since 2011. Our entire focus is gate installation, gate repair, and electric gate repair across the city. That’s the trade, nothing else.
Why Ontario Homes Are Different
Ontario sits directly in the Inland Empire’s Santa Ana wind corridor. When a wind event pushes through the Cajon Pass, it doesn’t just rattle trash cans. It gusts at 50 to 70 mph through the subdivisions along the 60 and the 15, and it finds every gate that was installed after construction by someone who didn’t think about footings. Driveway and side-yard gates here fail from wind fatigue, not rust. We see sagging hinges, bowed frames, vinyl panels that have cracked at the top rail, and operators that burned out trying to move a gate the wind had already forced off its travel. The housing stock compounds it. Most of Ontario’s single-family homes went up between the late 1980s and the 2000s, standard stucco tract construction on small lots, with builder-grade steel or vinyl gate panels hung on lightweight posts. Those four-inch posts are fine until the first real Santa Ana. Then the gate starts to rack, and every cycle strains the opener further. Call us at (855) 707-3634 when you notice it; waiting usually means replacing the panel instead of repairing the hang.
Styles & brands we work with
Our Main Ontario Services
Two services account for most of the calls we run across Ontario: mechanical repair work on gates that have failed, and repair of the electric and automated systems that move them. Each has its own page so you can go straight to the detail that matches your problem.
Gate Repair in Ontario
Wind takes a toll on Ontario gates faster than almost any other regional factor. Hinges stretch, post fasteners loosen in dry soil, and posts lean until the latch no longer lines up. We handle the full range of non-electric gate repair here, from re-hanging racked panels to cutting out rotted or fatigued steel sections and replacing the hinge hardware. Most Ontario repair calls we run are on the newer north-side tracts off the 60, where vinyl panels on four-inch posts give way first in a wind event. We diagnose on-site and quote before work begins. Gate Repair in Ontario covers the details.
Electric Gate Repair in Ontario
An automatic gate that will not open or close is a different problem than a mechanical failure. Ontario heat bakes circuit boards inside operator housings, while repeated wind loading makes motors work harder than they were ever sized for. We repair the motors, control boards, safety sensors, and access systems on all the major residential and commercial operator brands. If your swing or slide gate moves only halfway, reverses, or simply does not respond, we can usually diagnose it on-site in one visit. Electric Gate Repair in Ontario explains the full scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Ontario
New gate installation in Ontario has to account for the wind. Older tract homes and even newer two-story builds sit in flat subdivisions with open street canyons that funnel gusts directly at driveway and side-yard gates. When we install a gate and operator in this city, we size the posts, hinges, and opener for repeated sustained wind loading, not just the weight of the panel. We also know the local reality: many post-purchase automatic gates were installed with undersized footings, and a proper Gate Installation often means we address what was never done right the first time, from post embedment to operator mounting.
Automatic Gate Installation
Signs you need it
A gate that works but makes noise, jerks, or drags at one end is telling you the install was never sized for the opening.
What it costs in Ontario
A complete automatic gate and operator system in Ontario, installed, generally runs $4,500 to $18,000 depending on the panel length, operator type, and access control.
How we do it
We measure the opening and check the post condition, pour or reinforce footings to handle wind load, hang the gate, mount the operator, and set the travel limits and safety edges before we test the full cycle.
Electric Gate Installation
Signs you need it
If you already have a solid manual gate but now need it automated, or if a previous operator install keeps tripping its overload, the electrical install is the failure point.
What it costs in Ontario
Electric gate installation in Ontario typically lands between $3,000 and $10,000, with the operator itself, control board, safety devices, and any trenching for power being the main variables.
How we do it
We mount the operator to a reinforced post, run and protect the power feed, set up safety sensors and edges, and program the control board to the specific gate’s weight and travel, not a generic preset.
Driveway Gate Installation
Signs you need it
A driveway gate that’s been repaired twice and is now bowed or leaning at the top rail is past the point where another repair will hold.
What it costs in Ontario
Ontario driveway gate installations, including automatic operation, run $4,000 to $15,000, with sliding configurations generally costing more than swing gates on wide lots.
How we do it
We set new posts or reinforce existing ones, hang the gate to close exactly against the travel path, install the operator, and dial in the open and close stops for the specific panel we installed.
Sliding Gate Installation
Signs you need it
When the driveway slopes toward the garage, a swing gate is often not feasible at all, and a slide gate is the right fix.
What it costs in Ontario
Sliding gate installation across Ontario is typically $5,000 to $18,000, since it requires a cantilever or track system, a longer panel, and a heavier operator than a swing gate.
How we do it
We build the track or cantilever base, set the gate so it moves level and does not bind in the wind, mount the operator at the correct height, and test the safety photo eyes across the full run.
What Gate Installation Costs in Ontario
| Item | Typical range in Ontario |
|---|---|
| Manual driveway gate install | $1,500 – $6,000 |
| Electric gate installation | $3,000 – $10,000 |
| Full automatic driveway gate system | $4,500 – $18,000 |
What pushes most Ontario installs toward the top of these ranges is post work. The original footings on a 1990s tract house were never meant to hold a 16-foot steel gate in a wind corridor, and we will not bolt an operator to a post that is already moving. The alternative is a gate that works for a season and racks the first time the Santa Ana winds come through the Pass.
Do you pull permits for gate installation in Ontario?
When Ontario requires a permit for a motorized gate installation or electrical connection, we handle the process. If the gate is a panel replacement using existing posts and operator wiring, it often rides on what is already permitted, but we confirm that before we start digging or pouring. Call (855) 707-3634 and we will check your specific address.
How long does a new automatic gate installation take in Ontario?
Most Ontario gate installations go from measure to a working gate in one to two days. The variables are footing cure time on new posts, any trenching for electrical, and operator lead time if your panel calls for a slide rather than a swing. We give you the written schedule when we quote.
Brands We Service in Ontario
We specialize in gates, and within that trade we’re trained on the operator and access equipment Ontario homeowners and property managers actually run. We service BFT, Linear, Viking, and Ghost Controls systems, and we carry common our brands boards, limit switches, and safety devices so a repair does not stall waiting on a parts shipment. Turnaround on a stocked-part repair is usually same visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Ontario, CA
| Service | Typical range in Ontario |
|---|---|
| Gate repair (mechanical, non-electric) | $150 – $650 |
| Electric gate repair | $250 – $950 |
| Automatic gate repair | $350 – $1,500 |
| Manual gate installation | $1,500 – $6,000 |
| Electric gate installation | $3,000 – $10,000 |
| Automatic gate installation | $4,500 – $18,000 |
| Driveway gate installation | $4,000 – $15,000 |
| Sliding gate installation | $5,000 – $18,000 |
In Ontario, the biggest swing factor on repair prices is wind damage: a gate that is only misaligned is a small job, but a wind event that twisted a frame and burned out an operator in the same night is two jobs. You will know the price before any work starts, quoted and agreed, not a range that changes after we open the panel.
Neighborhoods We Serve in Ontario
We run calls across the full city every week, from the older central tract homes near Euclid Avenue to the newer subdivisions north of the 60 and the commercial and residential mix off Archibald and Haven. If you have an automatic or manual gate, we work your street. We typically get across Ontario for a repair call the same day, and the north-side wind-exposed tracts are the ones we know will call first after a canyon wind event.
- North Ontario tracts off the 60
- Central Ontario near Euclid Avenue
- Archibald and Haven corridor
- Creekside and Ontario Ranch area
- South Ontario along the 10
Service Area – Cities Near Ontario
We also run calls in the surrounding Inland Empire cities when a gate problem needs a specialist who keeps operator parts on the truck. We cover Montclair, CA, Upland, CA, Chino, CA, and San Antonio Heights, CA, with the same gate-only focus. If you’re in one of those cities and need an Ontario-based gate specialist, the drive is short and the estimate is free.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ontario
In most cases we get to an Ontario gate repair the same day you call, and we diagnose on-site. If the gate was damaged in a wind event, the earlier you call the better, because a gate that is left racking after its posts moved will only tear up more hardware the longer it cycles. Call (855) 707-3634 and we’ll give you a straight arrival window.
That depends on your tract. Many Ontario HOAs regulate gate height, panel material, and whether the gate can be motorized. We can work from the HOA’s written spec or help you put together what the HOA needs, but the approval itself is between you and your association. The install price is not affected by who approves it.
Yes. We service slide gates, swing gates, and barrier-arm style setups at Ontario commercial properties as well as single-family driveway gates. The operator brands and access control change, but the gate-only focus is the same. We quote the job out fully before any work starts, residential or commercial.
If your gate is down, sagging, making noise, or simply stopped responding, call Ontario Gate Company at (855) 707-3634. We’ll talk through what you are seeing, schedule the visit, and give you a written price before we touch a bolt.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ontario Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker