Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
Gate installation in Corona means working with the housing stock and soil conditions this city actually has, not the ones a template assumes. We build and install gates on 1970s tract homes off Ontario Avenue, on 1990s custom properties in the Eagle Glen and Sierra del Oro neighborhoods, and on newer master-planned builds in 92883 where the HOA has a specific iron finish and pillar height. Most Corona calls share one root cause: the ground moves. Expansive clay in the Temescal Valley and older hillside grading settle gate posts out of plumb, which stresses every hinge, latch, and operator. That reality shapes what we specify and how we install. If you need a gate that stays square through the dry season and the Santa Anas, call us at (855) 707-3634 for a free estimate.
Why Corona Homes Are Different
Corona splits into two fairly distinct gate worlds. The older one runs through central Corona and the neighborhoods off Grand Boulevard and Main Street, where homes from the 1950s through the 1980s sit on block walls with wrought-iron pedestrian and driveway gates. Those gates were often built on site, the iron is non-standard, and the hinges were set directly into stucco or masonry before anyone worried about soil movement. The newer world is in the south and east, places like Dos Lagos, Sycamore Creek, and the hillside communities in 92883, where gates are wider, operators are standard, and the pillars are tall enough that settling shows up quickly as a gate that drags or a bolt that no longer lines up.
Climate is the other factor nobody plans for until a gate stops working. Corona’s summers are long and dry, which is good for rust but hard on powder coat, plastic guide rollers, and anything with a grease fitting. The Santa Ana winds hit gates from the north and east, loading hinges and hinges’ mountings in ways a gate in Anaheim never sees. When the winter rains do arrive, the clay expands and old gate posts can shift a quarter inch in a week. Repair and installation in Corona both have to account for that movement up front, not after the first service call.
Styles & brands we work with
Our Main Corona Services
Corona homeowners call us most often about two things: a gate that will not swing or slide properly, and an automated gate that stopped responding to remotes, keypads, or safety sensors. Both are covered below.
Gate Repair in Corona
A gate that drags on the concrete, will not latch, or swings too far and smacks the wall is usually a combination of worn hinges, a bent frame, and a post that has moved. We see all three in Corona, especially in the older neighborhoods where the iron is original to the house and the posts were set decades ago. Our repair work starts with finding why the gate moved, not just straightening what bent. Hardened or seized cast-iron hinges on a 1960s gate off Grand Boulevard are something we handle as a restoration rather than a replacement whenever the iron is worth keeping. For Corona-specific repair pricing and a full breakdown, see our Gate Repair in Corona page.
Electric Gate Repair in Corona
When an automated gate in Corona quits responding, the cause is usually on the control side: a board, a loop detector, a safety edge, or a receiver that has failed from heat, wiring corrosion, or age. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, which means the technician who arrives already knows the common failure points of your specific brand rather than reading the manual on your driveway. Santa Ana winds also push gates against their limit stops repeatedly, which wears swing operators faster here than in most cities. See our Electric Gate Repair in Corona page for the full scope and pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Corona
Gate installation in Corona almost always starts with the question of what the gate will hang from. In the older neighborhoods off Grand Boulevard, a new gate often means repairing or rebuilding the stuccoed block pillar first, because the original hinge bolts have rusted their way out of the wall and there is nothing sound left to attach to. In the newer communities in 92883, the pillars are taller and often hold a heavier decorative gate, so the installation has to account for wind load and the slow, steady settling that comes with hillside clay. We install the gate, the hardware, and the operator as one system, not as three separate projects, which is why a Gate Installation from us starts with a load calculation and a look at the soil, not just a tape measure. You can read more about the full Gate Installation service or call (855) 707-3634 for a Corona-specific quote.
Automatic Gate Installation
Signs you need it
You want to open and close your driveway or side gate from the car, a keypad, or a phone, and your current gate is either manual or has an operator that is too far gone to rebuild.
What it costs in Corona
Automatic gate installation in Corona typically falls between $3,500 and $9,000 depending on operator type, gate size, and whether new electrical service has to be pulled.
How we do it
We check the gate’s weight and swing or slide path, verify or run power, mount and calibrate the operator, program remotes and keypads, and set the safety edges and photo eyes so the gate reverses correctly.
Driveway Gate Installation
Signs you need it
You have no gate at the driveway now, or the one you have is too narrow, too heavy for an operator, or structurally rusted beyond repair.
What it costs in Corona
A new driveway gate in Corona runs from $2,500 to $12,000, with the higher end covering custom fabricated iron, taller pillars, and an automatic operator.
How we do it
We measure the driveway, confirm pillar and foundation conditions, specify a gate that matches the house and HOA rules if any, then set the posts and hang the gate with hinges rated for its full weight and wind exposure.
What Gate Installation Costs in Corona
| Item | Typical range in Corona |
|---|---|
| Pedestrian gate, steel or iron | $600 – $1,800 |
| Driveway gate, fabricated steel | $2,500 – $12,000 |
| Automatic operator and controls | $1,800 – $5,000 |
The biggest cost swings in Corona come from pillar repair, custom ironwork, and the distance an electrician has to run conduit from the panel to the gate. We quote the full installed price before any work starts, and that number does not change unless you change the scope.
How long does a gate installation take in Corona?
Most residential installations take one to two days once materials are fabricated and on site. Custom ironwork adds lead time of one to three weeks depending on the fabricator’s schedule. We give you a written schedule at the quote stage so you are not guessing about access to your driveway. Call (855) 707-3634 for a Corona-specific timeline.
Do you handle the power and safety sensors on a new automatic gate?
Yes. We run or coordinate the complete electrical feed, mount the operator, wire the loop detectors and photo eyes, and test the entrapment protection before we leave. We do not install a gate that opens but will not reverse safely. Call (855) 707-3634 and we will quote the full package, not just the gate itself.
Brands We Service in Corona
We arrive in Corona already trained on the operators most common in Riverside County: LiftMaster and Linear on the residential side, FAAC and BFT on a lot of HOAs and commercial drives, plus Viking and Ghost Controls on custom estate gates. Because we specialize exclusively in gates, our trucks carry the control boards, limit switches, receivers, and safety parts for those brands, so a diagnostic trip and a repair trip are usually the same trip. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Diagnostic visit | $75 – $150 |
| Gate repair, non-electric | $175 – $850 |
| Gate realignment after post settling | $250 – $750 |
| Operator control board replacement | $500 – $1,500 |
| Operator motor replacement | $600 – $1,600 |
| Safety sensor or photo eye replacement | $300 – $700 |
| Complete operator replacement | $1,600 – $4,000 |
| Pedestrian gate installation | $600 – $1,800 |
| Driveway gate installation | $2,500 – $12,000 |
| Automatic gate installation | $3,500 – $9,000 |
In Corona, prices push toward the upper end when the gate hangs on a masonry pillar that has cracked and needs rebuilding, or when the operator has to be re-powered because the old conduit was never deep enough to be legal or safe. Whatever the job, we give the total price up front and honor it unless you add work.
Neighborhoods We Serve in Corona
We work the whole city, from the older blocks around City Park to the newer builds in the hills, and we know which areas need what. Here are a few representative neighborhoods:
- Central Corona and the Grand Boulevard corridor, original 1950s to 1970s gates
- Eagle Glen and Sierra del Oro, custom gates and automated drives
- Dos Lagos and Sycamore Creek, HOA-governed newer installations
- South Corona in 92883, taller pillars and heavier gate systems
- Norco Hills border area, wind-exposed gates
We typically schedule Corona calls within a few business days, and we batch our service route so a same-week visit is normal for most non-emergency repairs.
Service Area – Cities Near Corona
From our base in Ontario, we run regular routes through Corona and the cities around it. A gate problem in Norco, CA is often ten minutes away, and we also serve Eastvale, CA, Home Gardens, CA, and El Cerrito Corona, CA on the same schedule.
Serving Corona, CA — Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
We are a Corona service area company with technicians routed from Ontario, which means we are in Corona every week and do not treat it as a distant trip. Same-week scheduling is standard, and the phone number is the same for every city: (855) 707-3634.
Most residential gate installations in Corona require either a building permit for the gate footings and electrical or at minimum an electrical permit for the operator feed. HOA approval is often a separate step in the newer subdivisions. We can tell you which applies after seeing your property, and we handle the paperwork for the work we perform.
Call (855) 707-3634 and give us the gate’s location, the brand of operator if you know it, and what the gate is doing or not doing. We will schedule a diagnostic visit, and if the repair is straightforward we can often complete it on the same trip because the parts are already on the truck.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corona Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker