Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in La Habra, CA
Gate installation in La Habra means working with 1950s and 1960s tract homes, tight lot lines, and a patchwork of building codes that change depending on which side of Lambert Road you live on. Most calls we get are for driveway gates on older properties where the original posts have shifted or rotted, plus newer automatic gate systems on infill lots. Ontario Gate Company has served La Habra since 2011, and we specialize exclusively in gates, so the technician who shows up has diagnosed your exact gate brand before, not for the first time. Call (855) 707-3634 for a free estimate.
Why La Habra Homes Are Different
La Habra’s housing stock skews heavily toward tract homes built between the 1950s and 1970s, especially north of Whittier Boulevard and east of Beach Boulevard. Those original driveway gates were usually wood or chain-link on 4×4 posts set directly in soil with no concrete collar. Forty or fifty years later, the posts lean, the hinges bind, and the gate drags across the driveway. The fix is rarely a hinge swap; it’s resetting posts in new footings, which is why most La Habra gate repairs are structural before they’re mechanical.
Climate is the second factor. Santa Ana winds funnel through the Puente Hills and hit La Habra hard from the northeast. Wooden gates warp, and the dry air strips lubricant from hinges and wheels. Then the winter rains come, the clay soil swells, and gate posts shift by half an inch, just enough to stop an automatic opener from closing. The Whittier Boulevard corridor adds another wrinkle: many older homes have wrought-iron pedestrian gates set in block walls inches from the property line. There’s no room to swing the gate or dig a new post footing without coordinating with the neighbor, so those repairs require precise planning and often a wall-mounted hinge retrofit. And because La Habra’s northern and western edges touch unincorporated LA County land, properties near Lambert Road or Beach Boulevard may need county permits for anything over 6 feet or in the front setback, which doesn’t apply three blocks south in Orange County territory.
Styles & brands we work with
Our Main La Habra Services
La Habra homeowners call us about two things most often: a gate that won’t open or close properly, and an electric opener that has stopped responding entirely. Here’s what each involves.
Gate Repair in La Habra
A swinging gate that drags, a sliding gate that jumps its track, a sagging post that pulls hinges out of alignment. On La Habra’s older tract homes, most repairs start underground rather than at the hinge. We inspect the post footings, the hinge welds or bolts, and the gate frame for warping from Santa Ana cycles, then rebuild from the ground up so the gate stays true. Gate Repair in La Habra covers everything from steel and iron to wood and chain-link, residential and commercial.
Electric Gate Repair in La Habra
When an operator runs but the gate doesn’t move, or the remote stops working, or the gate reverses for no reason, the problem is nearly always the motor, the control board, or a safety sensor out of alignment. We diagnose on-site and carry control boards, sensors, and remotes for the major brands, which means most electric gate repairs in La Habra are completed in one visit. Electric Gate Repair in La Habra covers operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in La Habra
A new gate in La Habra usually means replacing a 50-year-old wood gate that’s warped past repair, or adding a motorized driveway gate to a property that never had one. The soil here shifts with the seasons, so we set posts in concrete footings below the root zone and size the hinges for the gate’s actual weight, not the weight the gate had when it was installed in 1968. For automatic gates, we pull the power run, mount the operator, and set the safety edges and photo sensors. Every installation is quoted and agreed before work starts, and the quote includes the full scope: posts, gate, operator if applicable, power, and safety gear. Gate Installation is what we do every day, and La Habra’s mix of old lots and new builds keeps the work interesting.
Automatic Gate Installation
Signs you need it
You’re opening and closing your driveway gate by hand every day, or the existing operator is so unreliable you’ve stopped using it.
What it costs in La Habra
A new automatic driveway gate system in La Habra typically runs $3,200 to $7,500, depending on the operator brand and the amount of trenching for the power run.
How we do it
We set the gate and posts first, then mount the operator, run power to the motor, and configure the remote controls, keypad, and any vehicle sensors before testing the full open-close cycle.
Electric Gate Installation
Signs you need it
You have a manual gate that works fine but you want remote-controlled access without replacing the gate itself.
What it costs in La Habra
Adding an electric operator to an existing gate in La Habra typically costs $1,800 to $4,000, including the motor, control board, remote controls, and power connection.
How we do it
We match the operator to the gate’s weight and cycle frequency, then install the motor, run the power, wire the safety sensors, and program the remotes.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, warped, or the posts have shifted so far the gate binds on one side.
What it costs in La Habra
A new steel or aluminum driveway gate set on new posts in La Habra typically runs $2,400 to $6,500 for the gate and installation.
How we do it
We cut out the old posts, pour new footings, mount the new gate, and adjust the hinges so it swings level and latches cleanly.
Sliding Gate Installation
Signs you need it
You have a wide driveway or a shallow setback where a swing gate would block the car, and you want a gate that slides parallel to the fence line.
What it costs in La Habra
A sliding gate system with track, roller trucks, and a motor in La Habra typically runs $4,500 to $9,500 including the operator.
How we do it
We lay the track on a steel-reinforced concrete base, set the roller trucks, hang the gate, and mount the operator with limit switches and a safety reverse edge.
What Gate Installation Costs in La Habra
| Item | Typical range in La Habra |
|---|---|
| Automatic gate system (motor, posts, gate) | $3,200 – $7,500 |
| Electric operator on existing gate | $1,800 – $4,000 |
| Driveway gate and new posts | $2,400 – $6,500 |
How long does a new gate installation take in La Habra?
Most standard driveway gate installations take one to two working days. Automatic systems with a power run, trenching, and safety sensors may take a third day in La Habra, especially if the panel is far from the gate or the county requires a permit inspection.
Do I need a permit to install a gate in La Habra?
Inside La Habra city limits, a permit is generally required for any gate or fence over 6 feet tall or in a front setback. If your property sits in one of the unincorporated county pockets near Lambert Road or Beach Boulevard, LA County building code applies instead, and the permitting path is different. We can tell you which jurisdiction applies to your address and what the process looks like before any work starts. Call (855) 707-3634 and we’ll check your parcel.
Brands We Service in La Habra
We service operators from Viking, Ghost Controls, DoorKing, and Elite, among the nine major brands our technicians are trained on. Because we’re a gate-only shop, we keep common control boards, remotes, and safety sensors in stock, so many La Habra repairs don’t wait on a parts order. See our brands for the full list and what each operator is known for.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in La Habra, CA
| Service | Typical range in La Habra |
|---|---|
| Gate repair (labor, typical) | $120 – $500 |
| Automatic gate system installation | $3,200 – $7,500 |
| Electric operator on existing gate | $1,800 – $4,000 |
| Driveway gate and new posts | $2,400 – $6,500 |
| Sliding gate system with motor | $4,500 – $9,500 |
| Electric gate motor replacement | $550 – $1,400 |
| Control board replacement | $400 – $1,200 |
| Safety sensor or photo eye replacement | $250 – $550 |
| Hinge or wheel replacement | $150 – $450 |
| Remote or keypad programming | $90 – $250 |
What pushes a La Habra job toward the top of these ranges is usually post work. If your posts are original to a 1960s tract home, they’re likely set shallow or straight in dirt, and we’ll need to pour new footings before hanging any new gate. The other big variable is the power run for an automatic gate; the farther the nearest outlet or panel is from the gate, the more trenching and conduit the job requires. Whatever the scope, we quote the full price before we start and we don’t add charges after the fact unless you add scope and approve the change in writing.
Neighborhoods We Serve in La Habra
We work across all of La Habra, from the older tract-home blocks around Whittier Boulevard to the newer developments near La Habra Heights and down toward Imperial Highway. Most service calls in La Habra are scheduled within the same week, and emergency gate failures are handled on a same-day basis when the gate is stuck open or won’t secure.
- Whittier Boulevard corridor
- North La Habra
- La Habra Heights border
- North Hills area
- Imperial Highway corridor
Service Area – Cities Near La Habra
Ontario Gate Company also serves the neighboring communities around La Habra. Our technicians are in Fullerton, CA and Brea, CA regularly, and we cover Buena Park, CA and Placentia, CA as well. If your property is on the La Habra border or in an unincorporated pocket, call us and we’ll confirm which service route covers you.
Serving La Habra, CA — Our Local Coverage Area
We’re based in the La Habra area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in La Habra
For a gate that’s stuck open, won’t secure, or has a vehicle trapped inside, we treat it as a priority and aim for same-day dispatch in La Habra. Standard repair and installation jobs are scheduled within the week, usually faster for mechanical repairs than for full installations that require permitting.
We identify which jurisdiction governs your parcel, city of La Habra or unincorporated LA County, and we tell you what’s required before work begins. If a permit is needed, we prepare the documents and coordinate with the building department. Call (855) 707-3634 with your address and we’ll check it right away.
Repair means restoring what you already have: hinges, posts, tracks, motors, sensors. Installation means we build new: new posts, new gate, new operator, new power run. For La Habra’s older tract homes, we’re honest about which direction makes sense, because sometimes a 60-year-old wood gate costs more to resurrect than a new steel gate costs to install.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Habra Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Yusuf Aziz"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen