Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Alpine, CA
Gate installation in Alpine runs $3,200 to $11,800 for a standard automatic driveway gate, with larger custom steel or wrought-iron builds on long rural driveways reaching $18,000 or more. Most Alpine jobs take two to five days from concrete pour to final operator programming. Alpine’s rural foothill parcels, horse properties and wildland-urban interface demand gates that hold up to heat, dust and Santa Ana wind, and we build them with that terrain in mind from the first site visit. Call (855) 707-3634 for a free site measure and written quote.
Why Alpine Homes Are Different
Alpine sits in the foothills east of San Diego, and the housing stock reflects that geography: mostly detached single-family homes on multi-acre rural parcels, ranch-style and custom foothill builds served by long private driveways, plus a number of older manufactured homes and equestrian properties with pipe or barbed-wire corral gates. That means gate work in Alpine looks different from coastal San Diego. We work on driveways that run hundreds of feet through chaparral and live oak, where a gate has to open smoothly even after a summer of fine dust blowing into the operator, and where a misaligned swing leaf on a sloped, settling hillside is the routine call, not the exception.
Alpine’s hot, dry inland climate and seasonal Santa Ana events dry out wood gates, warp steel frames that were never braced correctly, and stress automatic operators that run dozens of cycles a day during fire season. Winter rains, when they come, swell soil and shift gate posts; the dusty summers grind hinges and tracks on rural entries. On many Alpine properties the gate is also the fire-access point for wide emergency vehicles, so clearance and reliability are not optional extras. And because Alpine falls under San Diego County jurisdiction and specific fire-safe regulations for wildland-adjacent properties, a gate install or major repair often has to meet standards that a flat urban lot would never encounter. We account for every one of those conditions before the first post hole is dug.
Styles & brands we work with
Our Main Alpine Services
Most Alpine homeowners call us for one of two reasons: a mechanical gate that has stopped moving correctly, or an electric operator that no longer responds, whether from a burned control board, a failed loop detector, or a safety sensor knocked out of alignment. Both are covered below, each on its own Alpine page.
Gate Repair in Alpine
Mechanical gate repair in Alpine usually means sagging hinges on a wide swing gate that has pulled loose from its post, a sliding gate that binds on a warped track, or a gate leaf that drags against a gravel driveway that has risen over the years. On hillside parcels where soil settles and roots push up, we often find the gate frame itself has twisted and needs re-welding or full alignment. Our techs diagnose on-site, quote the repair before any work starts, and restore the gate to full function without selling a replacement when a repair will hold. As a gate-only specialist, we are not guessing at your equipment. See Gate Repair in Alpine for the full scope of what we fix, including common Alpine failure patterns.
Electric Gate Repair in Alpine
Electric gate repair in Alpine covers the operator, control board, loop detector, safety edge, photocell, and access-control integration. The two most common Alpine failure patterns: dust and heat kill a control board over a few summers, and Santa Ana wind gusts throw a gate off its limit stops, leaving the operator hunting for a position and burning itself out. We work on all major brands, which means we know, for example, a Linear actuator behaves differently than a BFT sliding operator, and we arrive with diagnosis in mind rather than a blank page. Alpine homeowners with remote controls that work intermittently, keypads that stop accepting codes, or gates that reverse for no clear reason should see Electric Gate Repair in Alpine.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Alpine
Gate installation in Alpine is a terrain-specific job. The long, unpaved or gravel driveways common across Alpine mean the gate is often the only controlled entry point to a property, and the supporting posts bear more load than a suburban gate because the gate leaf is typically wider and heavier to span fire-access clearance. Add in seasonal soil movement, dry heat and Santa Ana winds, and Alpine installs require deeper footings, stouter posts and an operator sized for the load, not the cheapest motor that fits. That is the problem we solve on every Alpine install: a gate and operator that stay aligned and cycle reliably through heat, dust and wind. Our installation service is described in detail at Gate Installation.
Automatic Gate Installation
Signs you need it
You have a wide or heavy driveway gate that you currently swing by hand, and opening it during rain, wind or a fire-evacuation moment is slow enough to be a genuine problem.
What it costs in Alpine
Automatic gate installation in Alpine runs $4,500 to $12,000 depending on gate width, operator type and whether power must be trenched to the entry.
How we do it
We measure the opening and gate weight, pour concrete footings that hold through Alpine’s wet-dry soil cycles, mount the operator, and run and test the safety edges and loop detectors before we call the job done.
Driveway Gate Installation
Signs you need it
You need a controlled entry on a long rural or hillside driveway, often to keep vehicles off the property, contain livestock, or meet fire-access clearance for emergency vehicles.
What it costs in Alpine
Driveway gate installation in Alpine typically runs $4,500 to $11,800, with wider custom steel or decorative iron builds going to $18,000 or more where the driveway spans the full emergency-vehicle width.
How we do it
We build the gate to the measured width and swing or slide configuration, set posts deep enough for Alpine’s soil, hang the gate, and wire and program the operator and safety devices to run reliably on your specific grade.
What Gate Installation Costs in Alpine
| Item | Typical range in Alpine |
|---|---|
| Single swing driveway gate with operator | $4,500 – $8,000 |
| Sliding driveway gate with operator | $5,500 – $11,800 |
| Custom steel or wrought-iron gate on wide rural driveway | $12,000 – $18,000+ |
How long does a gate installation take in Alpine?
Most Alpine gate installations take two to five days. That includes concrete curing time, which we do not rush because the footings on sloped or shifting rural soil are the part that keeps the gate square for years.
Do you handle the power run and the safety devices?
Yes. We trench and run power to the operator, and we install and test photo eyes, safety edges and loop detectors as part of every automatic gate installation. Call (855) 707-3634 for an exact quote for your Alpine property, including the power run distance.
Brands We Service in Alpine
We service BFT, Linear, Viking and Ghost Controls operators in Alpine, along with the rest of the major gate and operator brands. That means we carry the boards, arms, limit switches and remote receivers common to those systems, so most Alpine repairs are completed on the first visit without us putting your gate out of service while a part ships. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Alpine, CA
| Service | Typical range in Alpine |
|---|---|
| Automatic gate installation | $4,500 – $12,000 |
| Driveway gate installation | $4,500 – $11,800 |
| Custom steel or wrought-iron gate | $12,000 – $18,000+ |
| Full gate replacement | $6,000 – $11,500 |
| Gate repair (mechanical) | $380 – $690 |
| Gate operator replacement | $880 – $1,400 |
| Electric gate repair | $380 – $890 |
Prices in Alpine climb when a job involves a long power trench to a distant driveway entry, a gate wide enough for fire-access vehicles, or posts that have to be reset because the original footings were too shallow for the foothill soil. Whatever the number, we quote it in writing before any work starts, and that quote is the price you pay. There is no surprise invoice after the gate is back in place.
Neighborhoods We Serve in Alpine
We work across all of Alpine, from the ranch-style properties off Alpine Boulevard and Tavern Road to the horse properties and custom hillside homes on the east side near South Grade Road and the 91901 and 91903 ZIP codes. The spread of rural lots here means our typical response is same-day or next-day depending on how the day’s calls are routed.
- Alpine Heights
- Arnold Heights
- Crown Hills
- Harbison Canyon area
- Peutz Valley
Service Area – Cities Near Alpine
From Alpine we also cover the neighboring foothill and mountain communities across East San Diego County, including Harbison Canyon, CA, Jamul, CA, Eucalyptus Hills, CA, and Lakeside, CA. Much of that territory shares the same rural driveway patterns and fire-access requirements we see on Alpine properties, so the work transfers directly.
Serving Alpine, CA — Our Local Coverage Area
We’re based in the Alpine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alpine
Most Alpine calls are scheduled within 24 to 48 hours, and same-day service is often possible when a gate is stuck open or closed. We know a failed gate on a rural Alpine driveway is a real security and access problem, so we route those calls with that urgency.
It depends on the property and the gate’s relationship to the fire-access route. Many Alpine parcels under San Diego County jurisdiction require fire-access clearance for emergency vehicles, and a new automatic gate may need to meet those standards. We review the specific requirements for your address before the install is quoted.
Yes, including pipe-frame and barbed-wire corral gates and the wide swing entries common on Alpine equestrian parcels. Automatic operators on those gates need to be sized for the heavier leaf and the dust load, which is exactly the kind of job we handle as a gate-only company. Call (855) 707-3634 for a free estimate on any Alpine gate, whether it serves a house, a horse paddock or both.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alpine Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Alma Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Yusuf Aziz"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes