Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bloomington, CA
Gate installation in Bloomington, CA means working with older single-story ranch homes and manufactured homes on large lots, where long driveway gates and backyard gates are built into chain-link and wood fencing that has seen decades of Inland Empire sun and wind. Ontario Gate Company specializes exclusively in gates, which means we arrive with gate-specific tools, parts, and diagnostic equipment rather than a general contractor’s truck. When a Bloomington property’s gate sags, binds, or stops opening, call us at (855) 707-3634 and we’ll diagnose the problem on-site and restore it to full function.
Why Bloomington Homes Are Different
Bloomington sits in the hot, dry Inland Empire, an unincorporated San Bernardino County community where most properties are older single-story ranch houses and modest manufactured homes on generous rural-feeling lots. The ZIP code 92316 stretches across flat, dusty terrain that bakes under intense summer sun and gets hit by periodic Santa Ana winds. That combination does specific things to gates: wood warps and cracks, paint dries and peels, hinges loosen, and posts set in dry, shifting soil start to lean. A gate that hung true in April can be dragging on the ground by September.
The housing stock here matters too. Many Bloomington lots have long driveway frontages with chain-link perimeter fencing and multiple pedestrian gates per property. Most of these gates are original or decades old, hung on chain-link posts that were set without concrete or in shallow footings. When the soil dries out and the wind pushes against a gate, the post gives way. What gets called a “gate repair” in Bloomington frequently turns into re-setting a leaning post and re-truing a sagging wood or iron gate after a Santa Ana wind event. The work is practical and repair-focused, not decorative or HOA-driven.
Styles & brands we work with
Our Main Bloomington Services
Bloomington homeowners and property managers call us most often for two services: gate repair on existing hardware, and electric gate repair on automated systems. Here’s what each involves locally.
Gate Repair in Bloomington
Most gate repair calls in Bloomington involve hardware that has been stressed by heat and wind: sagging hinges, latches that no longer catch, posts that have shifted in dry soil, and wood or iron gates that drag or bind. We inspect the full assembly on-site, identify exactly what failed, and quote the repair before any work starts. Because we’re a gate-only specialist, we carry common hinge sizes, latch hardware, and post-setting materials suited to the aging chain-link and wood fencing stock here. For the full picture, see Gate Repair in Bloomington.
Electric Gate Repair in Bloomington
Electric gate systems in Bloomington deal with the same heat and dust as the gates they move. Motors overheat, control boards fail from voltage spikes, safety sensors get coated in fine dust, and loop detectors stop reading vehicles. We service residential and commercial operators across multiple brands, and electric gate repair is a core competency for us, not an occasional add-on. If your automated gate in Bloomington is stuck, beeping, or operating intermittently, see Electric Gate Repair in Bloomington.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Bloomington
Gate installation in Bloomington is shaped by the local housing stock: long driveway frontages on large lots, chain-link and wood fencing that is often decades old, and gates that need to stand up to summer heat and Santa Ana wind. When we install a new gate here, we plan for soil conditions that shift with the seasons and posts that need deeper, more stable footings than you’d see in newer subdivisions. Whether you need a new driveway gate, a pedestrian gate, or an automated system, Gate Installation starts with a site assessment and a written, upfront price.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has sagged past adjustment, the post is leaning badly, or repairs now cost more than a properly installed replacement.
What it costs in Bloomington
Driveway gate installation in Bloomington typically runs $1,800 – $6,500 depending on gate size, material, and whether automation is included.
How we do it
We measure the opening, check post footings and soil stability, install or re-set posts, hang and true the gate, and adjust all hardware to close and latch properly.
Automatic Gate Installation
Signs you need it
You want vehicle and pedestrian access control without leaving your car, or you’re replacing a manual gate that gets opened and closed many times a day.
What it costs in Bloomington
Automatic gate installation in Bloomington typically ranges from $2,500 – $8,000 including the operator, safety devices, and electrical connection work.
How we do it
We mount the operator on a properly set post, install safety sensors and edges, run power, program remotes and keypads, and test the full open-close cycle.
What Gate Installation Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,500 – $8,000 |
| Sliding gate installation | $2,200 – $7,000 |
How long does gate installation take in Bloomington?
Most Bloomington gate installations take one to two days on-site, depending on post work, soil conditions, and whether automation or access control is included. Larger custom work can run longer. Call (855) 707-3634 for a timeline specific to your property.
Do I need a permit for a gate in Bloomington?
As an unincorporated San Bernardino County community, Bloomington follows county rules for gate and fence work. Setback and height rules can apply to driveway gates and new posts. We can point you to the right county requirements before work begins.
Brands We Service in Bloomington
We service gate operators from DoorKing, Elite, Viking, and Ghost Controls, among the nine major brands our technicians train on. We stock common control boards, sensors, and remote transmitters for these systems, which means faster turnaround on many Bloomington repairs. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,500 – $8,000 |
| Sliding gate installation | $2,200 – $7,000 |
| Gate repair | $150 – $600 |
| Electric gate repair | $200 – $900 |
| Gate motor replacement | $650 – $1,800 |
| Control board replacement | $350 – $1,200 |
| Sensor alignment or replacement | $150 – $450 |
| Post reset with concrete | $300 – $900 |
| Gate opener installation | $2,500 – $8,000 |
Prices in Bloomington shift with post conditions: gates hung on aging chain-link posts set in dry, shifting soil often need post resets before new hardware goes on, and long driveway gates with multiple panels cost more to true and hang. We quote every job upfront and the price you approve is the price you pay, no surprises after the work starts. Call (855) 707-3634 for a free estimate.
Neighborhoods We Serve in Bloomington
We cover all of Bloomington’s 92316 ZIP code, including the older ranch-home streets and manufactured home communities across the area. Our response is typically same-day or next-day for gate repair calls, and installation work is scheduled around your timeline.
- Bloomington proper, 92316
- Glen Avon area
- Jurupa area
- South Bloomington
- West Bloomington
Service Area – Cities Near Bloomington
Ontario Gate Company serves Bloomington and the surrounding Inland Empire communities. Our service area also includes Fontana, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA. If you’re in one of these neighboring cities, our gate specialists are already working routes through the area.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bloomington
For gate repair calls in Bloomington, we typically arrive same-day or next-day depending on call volume and time of day. Electric gate repair may take slightly longer to schedule because those jobs involve more diagnostic equipment and sometimes parts ordering. Call (855) 707-3634 and we’ll give you a realistic arrival window.
Yes. Many Bloomington manufactured home lots have chain-link perimeter gates and driveway gates that are decades old and hung on aging posts. We reset posts, replace hardware, and true gates on these properties regularly, and we quote the work before starting.
Yes, we cover the entire 92316 area, including the older ranch-home streets and the manufactured home communities. We do not limit our Bloomington coverage to certain neighborhoods, and our gate-only focus means we arrive prepared for the local soil, climate, and gate hardware conditions.
If your Bloomington gate is sagging, sticking, or failing to open, call Ontario Gate Company at (855) 707-3634 for a free estimate. We specialize exclusively in gates and we’ll get yours back in operation.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez