Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Buena Park, CA | Ontario Gate Company
We repair Ghost Controls swing gate operators throughout Buena Park, from the solar-charged low-voltage kits to the heavy-duty dual swing models. As an independent shop, not a dealer, we diagnose what’s actually failing rather than defaulting to a full replacement. The one thing that makes our Ghost Controls sales & service work different here: Buena Park’s alley-and-side-yard driveways set posts in sandy soil, so the operator is often fine while a tilted post drags the leaf. Call (855) 707-3634 and we’ll sort out which is which.
Why Buena Park Residents Choose Us for Ghost Controls Service
Ontario Gate Company is a gate-only shop. We don’t do fences on the side, we don’t do garage doors on the side, and we don’t learn your operator’s wiring diagram on your driveway. We work on Ghost Controls solar and low-voltage swing gate operators every week across Orange County, from Ghost Controls repair in Cypress to coastal cities, so we know their control boards, battery behavior, and actuator stroke limits from the inside. Your Ghost Controls operator has specific failure points, and we already know where to look.
Noel Carrasco built this company around one idea: show up knowing what you’re looking at, not figuring it out on the customer’s dime. He learned the mechanical and electrical fundamentals through the Industrial Technology program at Chaffey College, then spent over two decades turning that into field knowledge on driveways and commercial lots across the Inland Empire and Orange County. Know what you’re looking at before you touch it. That’s how we approach every Ghost Controls call in Buena Park service area.
We use Ghost Controls OEM control boards, arms, and battery packs where the unit is sound, and quality aftermarket actuators, keypads, and safety photo-eyes where they outlast the original at lower cost. You get a straight answer about which one your gate needs.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Buena Park
- Tilted posts dragging the leaf: In the 90620/90621 alley-and-side-yard driveways, posts sit in sandy soil off the main slab. The post tilts, the gate drags, and the Ghost Controls operator gets blamed for a reversing or stalling symptom it didn’t cause. We re-set the post and correct the swing before we touch the motor.
- Corroded actuator arms and pivot pins: The near-coastal salt air and morning marine-layer damp in Buena Park accelerate rust on the low-voltage actuator arm and pivot pins. The arm binds, the gate trips a false obstruction, and the owner thinks the board is bad. Often it’s a pin replacement and arm service, not a board swap.
- Degraded solar-charged battery packs: Ghost Controls solar kits ship with battery packs that lose capacity after a few years. On overcast mornings, the gate stalls or reverses mid-swing because the batteries can’t hold voltage under load. We test and replace the pack, then verify the charge controller is still doing its job.
- Control-board and limit-switch faults after Santa Ana winds: A poorly latched gate racked by a strong Santa Ana wind event can over-travel the actuator. The limit switches lose their reference, the board throws a fault, and the gate refuses to move. We re-set limits, re-latch the leaf, and replace the switches only if the wind actually damaged them.
- DIY-installed kits on aging posts: A Ghost Controls kit bolted to a 50-year-old post on a postwar tract lot will always fight the gate’s sag. The opener gets blamed for slow travel and false trips when the real problem is the structure under it. We quote post work and hinge replacement before recommending anything on the operator side.
Ghost Controls Service in Buena Park: What Local Conditions Mean for Your Equipment
Buena Park’s older single-family tracts, especially the 1950s and 60s postwar housing around ZIP 90620 and the beach-close 90621 corridor, run on narrow lots with alley-facing and side-yard driveways. Those driveways put gate posts in sandy, shifting soil away from the main concrete slab. On Ghost Controls calls here, the operator is often fine and the real culprit is a tilted post dragging the leaf. That’s why we quote post re-setting and swing correction before we touch the motor. It’s a different job than Ghost Controls repair in Fullerton or La Mirada would typically see, where posts sit in more compacted soil against the main drive approach.
In the postwar tracts off ZIP 90620, a homeowner called us because their Ghost Controls dual swing kit kept reversing partway through the opening cycle. We found the rear post had tilted in the sandy side-yard soil and the actuator arm was fighting the drag. We re-set the post, realigned the swing, replaced a corroded pivot pin, and reset the limits. The original operator has run clean since. The motor was never the problem.
Ghost Controls Models & Products We Service in Buena Park
We repair the full Ghost Controls residential line: the Heavy-Duty Residential Swing Gate Opener single-leaf DIY kits, the Dual Swing Gate Opener kits, the solar-charged low-voltage operator bundles, and the TDS series tube-style actuator arms. That covers everything from a basic single-leaf driveway gate on a 90620 side yard to a dual-leaf setup on a larger lot near the 90621 corridor.
Our parts approach is simple: OEM boards, arms, and battery packs where the unit is sound, and aftermarket actuators, keypads, and safety photo-eyes where they outlast the original at lower cost. If the arm and board are both shot and the gate itself is sagging, we’ll tell you honestly that re-setting the gate and replacing the operator beats chasing parts on a tired unit. We keep common Ghost Controls parts stocked for fast Buena Park turnaround, so you’re not waiting on a ground shipment for a board or a battery pack.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Buena Park
Most Ghost Controls repair in La Palma and Buena Park fall into predictable ranges: a diagnostic service call typically runs $89-$149, and that fee is credited toward the repair if you approve the work. Motor repairs run $225-$550 depending on whether it’s a gear set, limit switch job, or full motor replacement. Control board replacement lands at $175-$400. Battery backup pack replacement runs $95-$220. Hinge and post re-setting, which is the real job on many 90620/90621 alley-lot calls, typically runs $180-$450 depending on how far the post has moved and whether we’re pouring new concrete or re-setting existing.
Every quote is agreed before any work starts. You’ll know the number and approve it first. No invoice surprises. Call (855) 707-3634 for a free estimate on your Ghost Controls repair.
Serving Buena Park, CA — Our Local Coverage Area
We’re based in the Buena Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Buena Park
Usually not. In Buena Park’s 90620/90621 alley-lot homes, a reversing Ghost Controls gate most often means the post has tilted in sandy side-yard soil and the actuator arm is fighting the drag, or the battery pack has degraded and the gate stalls mid-swing. The motor gets blamed for symptoms the structure or the power supply caused. We diagnose on-site and tell you what’s actually failing before quoting anything. Call (855) 707-3634 for an accurate read.
Yes, and faster than you’d think. The near-coastal salt air and morning marine-layer damp accelerate corrosion on the actuator arm and pivot pins. The arm binds, the gate trips false obstruction errors, and the board gets the blame. We replace the corroded pins and service the arm, and use marine-grade hardware where it makes sense on Buena Park gates.
A strong Santa Ana wind event can rack a poorly latched gate until the actuator over-travels. That throws off the limit switches and faults the control board. The fix is usually re-setting limits and re-latching the leaf, not replacing the board. If the wind event actually bent the arm or damaged the mounting bracket, we’ll replace only what’s damaged.
Yes. The battery pack in Ghost Controls solar kits degrades after a few years, and on overcast mornings the pack can’t hold voltage under load, so the gate stalls or reverses mid-swing. We test the pack under load, replace it if it’s weak, and verify the solar charge controller and panel are still feeding correctly. Call (855) 707-3634 and we’ll get your solar kit running on Buena Park’s morning cloud cover without a new operator.
Yes, and this is one of the most common Ghost Controls calls we take in Buena Park. The kit itself is usually fine. The problem is the 50-year-old post it’s bolted to, sitting in sandy soil that’s shifted over decades. We re-set the post, correct the swing, replace worn hinges, and then dial in the operator. You end up with a gate that runs clean instead of a kit fighting its mounting point. Estimates are free.
Service Areas Near Buena Park
We run Ghost Controls service throughout Buena Park and the surrounding cities: Fullerton, La Mirada, Anaheim, Cypress, and La Palma. For Ghost Controls owners in the Tustin area, see Ghost Controls service in Tustin. For mountain-property gate work, see Ghost Controls service in Crestline.
Book Your Ghost Controls Service in Buena Park Today
If your Ghost Controls gate is reversing, stalling, or just fighting you every morning, call (855) 707-3634. We’ll diagnose it on-site, quote the fix before any work starts, and get your gate back in operation. Same-day service is available for most Buena Park repair calls.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Buena Park and Orange County for over two decades.