Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Pedley, CA | Ontario Gate Company
We repair Ghost Controls swing gate operators across Pedley, CA, and our work here leans heavily on battery, solar, and control-board diagnostics rather than ornamental ironwork. Pedley’s semi-rural landscape means most Ghost Controls units sit far back on long gravel or dirt driveways, powering heavy ranch-entrance gates that take real abuse from heat, dust, and Santa Ana wind. When one of these operators quits, you’re not walking around to a front door – you’re stranded at your own property line. Call us at (855) 707-3634 and we’ll get a technician out to your driveway. We’re an independent Ghost Controls service provider, not a manufacturer-authorized shop, which means we tell you plainly what’s factory, what’s aftermarket, and what actually needs replacing.
Why Pedley Residents Choose Us for Ghost Controls Service
Ontario Gate Company specializes exclusively in gates. That’s not a tagline – it’s the entire business. Every technician, every diagnostic tool, and every stocked part is oriented around one trade, and that narrow focus shows up fast when a Ghost Controls operator fails in Pedley heat. We see the Ghost Controls sales & service work differently than a general repair crew would: we already know the AXS and ACTP control boards, the arm geometry, and the battery behavior these units show under real Inland Empire load. Noel Carrasco, our owner, has been working gates across the Inland Empire for over two decades, and he built this company around one idea: know what you’re looking at before you touch it. That’s why our technicians arrive at Pedley driveways already familiar with the failure points Ghost Controls operators develop here – not reading a manual on your dime.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Pedley
Most Ghost Controls in Glen Avon and Pedley service calls follow a handful of patterns. Here’s what we’re actually finding when we open the box:
- Solar and battery sag during triple-digit heat. The AXS and ACTP kits run on solar-charged batteries, and Pedley summers push those batteries hard. The operator still beeps but won’t complete a cycle. Owners assume the board is dead. It’s usually a weak battery and an undersized solar panel that can’t keep up with the heat load.
- Santa Ana dust packed into the control box and arm pivot. After a wind event, fine sand from the open ground around Pedley gets into limit switches and stalls the arm mid-travel. We find grit in places factory seals were never meant to defend against.
- Bent swing arms and stripped drive gears on heavy wrought-iron gates. Long ranch-entrance gates near Van Buren and along the Jurupa Valley edge often exceed the operator’s rated gate weight. The arm takes the strain, bends, and the gear eats itself.
- Corroded battery terminals and keypad wiring. Gravel driveways collect irrigation runoff and dust at the operator post. Over a few seasons, that combination corrodes terminals and push-button wiring until the signal never reaches the board.
- Undersized operators on agricultural-scale gates. Ghost Controls makes solid residential kits, but a TDS2 isn’t built for a 400-pound steel gate with horse-trailer traffic. When the gate is too heavy, we say so before selling a replacement motor.
Ghost Controls Service in Pedley: What Local Conditions Mean for Your Equipment
Pedley’s gate landscape is dominated by large-lot, semi-rural properties along the Jurupa Valley edge, where long driveway and ranch-entrance gates are the norm rather than decorative courtyard gates. That changes the repair math. A Ghost Controls service in Rubidoux or Rancho Cucamonga on a tract-home courtyard gate sees maybe a dozen cycles a day. The same unit on a horse property off Van Buren cycles every time a truck, trailer, or feed delivery pulls in and out – often forty or fifty times daily in dusty, wind-blown conditions. The dust and blowing sand from surrounding open land work into hinges, tracks, and operator gears, wearing components far sooner than Ghost Controls’ published service intervals would suggest. When we open a control box after a Santa Ana event in Pedley, we expect to find sand. We bring the brushes, contact cleaner, and replacement seals for exactly that job.
Ghost Controls Models & Products We Service in Pedley
We work on the full Ghost Controls lineup as it appears on Pedley driveways: the AXS Series single-swing operator kits, the ACTP Series dual-swing kits, the TDS2 heavy-duty dual-swing kit, and the solar and battery-backup accessory kits (AXDP/ABK). We stock genuine Ghost Controls control boards, arms, batteries, and solar panels for fast turnaround, and we use quality aftermarket keypads and remotes when the factory part is backordered. We won’t put a cheap board in a heavy ranch gate, and if the gate itself is undersized or bent, we’ll tell you to fix the gate before spending on a bigger operator. That honesty matters more on Pedley’s heavy gates than anywhere else.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Pedley
Ghost Controls gate repair in Pedley typically runs $150 to $450 for most component replacements, with full operator swaps on heavier ranch gates landing between $600 and $1,400. The honest answer is that the range depends on what we find when we open the box. Here’s how it breaks down:
- Service call and on-site diagnostic: quoted before we dispatch, credited toward the repair.
- Battery replacement (AXS/ACTP): $80 to $180, depending on battery type and wiring condition.
- Control board replacement: $150 to $320, plus labor.
- Arm, gear, or pivot repair: $120 to $300, depending on damage.
- Full operator replacement: $600 to $1,400, including labor and setup.
Every price is quoted and agreed in writing before any work starts. You’ll never get an invoice bigger than the number we gave you. Call (855) 707-3634 for a free estimate – we’ll tell you what’s actually wrong before we touch a wrench.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well, including Ghost Controls in Riverside neighborhoods. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Pedley
Yes, and this is exactly the kind of Pedley job we handle most. A Ghost Controls AXS on a long gravel driveway usually fails either at the battery, the solar lead, or the limit switches – not the board. Because the gate is set back far from the street, we prioritize same-day battery and control-box diagnostics in Pedley so you’re not locked out of your own property. Call (855) 707-3634 and we’ll head out.
Yes. We add aftermarket keypads and intercoms to Ghost Controls systems on Pedley properties all the time. The factory Ghost Controls keypad works fine, but when it’s backordered or the wiring has corroded, we use a quality aftermarket unit that ties into your existing control board. We’ll quote the part and the wiring before we start.
No. Ontario Gate Company is an independent Ghost Controls service provider. We are not authorized, sponsored, or warranty-endorsed by Ghost Controls. That independence means we tell you plainly what’s factory, what’s aftermarket, and whether a repair is worth doing at all. If a Ghost Controls warranty claim is possible, we’ll help you understand the process – we just don’t pretend to be the manufacturer.
We stock genuine Ghost Controls control boards, arms, batteries, and solar panels for Pedley service calls. When the factory part is backordered, we use quality aftermarket keypads and remotes – but we won’t install a cheap board in a gate that has to hold up to Pedley’s dust and heat. We’ll tell you which part is going in and why.
Most Ghost Controls repairs in Pedley take between one and three hours once we’re on-site. Battery replacements and limit-switch resets are quick. A board replacement on a dusty control box takes longer because we clean and reseal the enclosure before installing the new part. If the gate itself is bent or undersized, that’s a separate conversation – and we’ll have it before recommending a bigger operator.
A field example we remember: a horse-property owner off Van Buren near the Jurupa Valley edge called because her Ghost Controls ACTP dual-swing gate quit halfway open after a windy weekend. We found the control box packed with wind-blown sand and a swollen battery. We cleared and resealed the box, replaced the battery and solar lead, and reset the limit switches. The gate cycled clean and she could get her truck and trailer out. That’s what most Pedley Ghost Controls work looks like.
Service Areas Near Pedley
We serve Pedley and the surrounding communities, including Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, Los Serranos, and La Verne. If you’re in Pedley and need Ghost Controls service, call us directly. We also provide Ghost Controls service in Fontana and Ghost Controls service in Sunnyslope. Our Pedley service area covers the 92509 ZIP code and the unincorporated pockets along the Jurupa Valley edge.
Book Your Ghost Controls Service in Pedley Today
A dead Ghost Controls operator on a Pedley driveway means you can’t get in or out. Don’t wait on a unit that’s already failing. Call Ontario Gate Company at (855) 707-3634 for a free estimate, and we’ll have a technician who knows Ghost Controls equipment on his way. Same-day diagnostics available for battery and control-box failures in Pedley.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Pedley with our Gate Repair in Pedley and the Inland Empire with gate-specific repair since day one.