Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Piñon Hills, CA | Ontario Gate Company
We provide independent Ghost Controls gate repair across Piñon Hills, CA. If your TDS2, TB175, or TSS1 operator is acting up out here, the problem usually isn’t the motor – it’s sand-packed hinges, a shifted post, or a baked battery. We diagnose it on-site, tell you straight what’s rebuildable, and get your gate swinging again without selling you parts you don’t need. Call (855) 707-3634 for a free estimate.
Key takeaways:
- Independent Ghost Controls service – not manufacturer-authorized, and we’ll never pretend otherwise.
- We stock Ghost Controls OEM boards, arms, batteries, and receivers for fast Piñon Hills turnaround.
- High-desert grit and post heave are the real culprits behind most Ghost Controls failures here, not the operator itself.
- Free estimates, upfront pricing, and the price is agreed before any work starts.
Why Piñon Hills Residents Choose Us for Ghost Controls Service
We work on Ghost Controls operators every week. We know the TDS2 dual-swing arms, the TB175 heavy-duty single, the TSS1 slide, and the AXS accessory line – keypads, receivers, solar panels, battery boxes. We’re not a general repair shop that occasionally sees a gate. Gates are all we do, and Ghost Controls is one of the nine operator brands our techs are trained on, alongside LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule.
Noel Carrasco built Ontario Gate Company around one idea: know what you’re looking at before you touch it. He grew up near Cucamonga-Guasti in Ontario and has been working gates across the Inland Empire for over two decades, starting with the industrial technology program at Chaffey College and then years of driveway and commercial lot field work. When we send a tech to a Piñon Hills property, they arrive knowing the common failure points of a Ghost Controls arm on a rural desert driveway – not learning on your dime. For broader Ghost Controls coverage and service details, see our Ghost Controls sales & service page.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Piñon Hills
- Grit-packed cantilever rollers and swing hinges. Windblown sand packs into track rollers and hinge barrels on open-desert lots around 92372. The arm strains until it reverses or trips its limit. The opener gets blamed; the rollers are the actual cause.
- UV and heat-killed batteries. The battery box bakes in intense high-desert sun, and the solar panel gets dust-coated or shaded. The motor is fine; the battery is dead. We test the charge path and replace what’s actually failed.
- Post heave and misalignment from freeze cycles and monsoon downpours. Concrete posts on unpaved rural drives shift. The swing arm goes out of geometry, drags, and the controller reads a fault that is really a plumb problem. We re-set the post and re-tune the limits.
- Frayed low-voltage runs and corroded control-box terminals. Long driveway wire runs exposed to dust and rodent traffic show up as intermittent keypad or remote failures on TDS and TB installs. We trace the run and repair the connection.
- Solar charge path failures. A dusty panel or a weak charge controller on AXS solar kits leaves the battery undercharged, and the gate dies intermittently. We clean, test, and replace the charge components that need it.
Ghost Controls Service in Piñon Hills: What Local Conditions Mean for Your Equipment
Piñon Hills is high-desert horse country. Large-lot parcels off Ghost Controls in Phelan and Highway 138, wide steel-tube driveway gates, equine properties, and no municipal water – which means no irrigation overspray keeping gate posts damp. Instead, the posts and hinge barrels sit in dry, wind-scoured sand and grit that never washes out. That single fact changes what Ghost Controls repair looks like out here. Around 92372, our calls are grit-and-plumb jobs: track rollers packed solid, hinge barrels grinding, posts that heaved after winter rains. Not the soggy-wiring calls we get in watered suburban yards. A Ghost Controls arm that’s reversing or straining on a Piñon Hills driveway is usually fighting the gate itself, not the motor. That’s the diagnosis a generic brand page or a generic city page won’t give you, and it’s the one that saves you from paying for a board you didn’t need. On a wide steel-tube double-swing driveway gate off Phelan Road, our tech found a TDS2 kit that had been reversing intermittently for weeks. The buyer assumed the board was bad. The real fault was sand packed solid into both hinge barrels plus a post that had heaved about an inch after the winter rains. We dug out and re-set the post, cleaned and re-greased the hinges, re-plumbed the arms, and re-tuned the limits. The operator never needed replacing, and the gate has swung clean through the summer wind since.
If you’re outside the immediate Piñon Hills area, check our Piñon Hills service area page for coverage details.
Ghost Controls Models & Products We Service in Piñon Hills
We service the full residential Ghost Controls line: TDS2 and TDS series dual-swing arms, TB175 and TB series single swing arms, TSS1 slide operators, and the AXS accessory line including keypads, remote receivers, solar panels, and battery boxes. We use genuine Ghost Controls boards, arms, batteries, and receivers where they matter, and quality aftermarket hinges, rollers, and keypads where the OEM part is a rebadge anyway. We tell you straight when a TB or TDS operator is rebuildable – battery, board, limit switches, hinge set – versus when the gate itself is the problem and a new motor would just mask it. Our parts inventory is gate-specific, which means faster turnaround for Piñon Hills customers who can’t wait weeks on a backordered arm.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Piñon Hills
Ghost Controls gate repair in Piñon Hills typically runs $180 to $340 for most on-site diagnoses and component-level repairs. A hinge and post re-set job runs higher because of the labor involved in digging out and re-plumbing the post. Battery replacement with a genuine Ghost Controls battery is usually $120 to $220 parts and labor. A full operator replacement, if it comes to that, is $1,050 to $1,550. What drives the cost: the specific failure, whether it’s a board, battery, hinge set, or post alignment, and how long the driveway run is. Our free estimate includes a full on-site inspection and a written price before any work starts. You’ll know the number before we touch a tool. Call (855) 707-3634 for an exact quote – estimates are free and there’s zero obligation.
Serving Piñon Hills, CA — Our Local Coverage Area
We’re based in the Piñon Hills area and know this community well, with Wrightwood Ghost Controls service nearby as well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Piñon Hills
Almost never. In Piñon Hills, afternoon wind pushes sand into the hinge barrels and track rollers, which makes the arm strain and reverse as a safety response. The motor is fine; the gate’s mechanicals are fighting it. We clean the rollers or hinges, re-lube them, and re-tune the limits. Call (855) 707-3634 to schedule an inspection.
High-desert sun bakes the battery box, and dust coats the solar panel until it can’t hold a charge. The charge path degrades before the battery itself does in many cases. We test the panel output, the charge controller, and the battery under load, then replace only what’s failed. Call (855) 707-3634 to have it tested on-site.
Yes. We service TDS2 dual-swing arms, TB175 single arms, and TSS1 slide operators on rural Piñon Hills driveways regularly. Long runs off Highway 138 are exactly the installations we see – wide steel-tube gates on wind-scoured posts – and we also handle Ghost Controls in Oak Hills. The distance from the road doesn’t change the diagnosis; it just means we bring the parts with us.
No. If the motor, board, and arm are sound, the fix is mechanical: we re-set the post, clean and re-grease the hinges, re-plumb the arms, and re-tune the limits. Replacing the operator would just mask the gate problem and cost you a lot more. We’ll tell you straight which side of the line you’re on.
No. We’re an independent gate repair company that works on Ghost Controls operators every week, but we’re not affiliated with, authorized by, or sponsored by Ghost Controls. We use genuine Ghost Controls parts where they matter and we never imply a manufacturer warranty applies to our work. What you get is a straight diagnosis and a fixed gate.
Service Areas Near Piñon Hills
We cover Piñon Hills and the surrounding Victor Valley and Inland Empire areas. That includes Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, Los Serranos, and La Verne. For Ghost Controls work closer to those cities, see our Ghost Controls service in Moreno Valley and Ghost Controls service in Highland pages.
Book Your Ghost Controls Service in Piñon Hills Today
If your Ghost Controls gate is reversing, dragging, or dead, call (855) 707-3634. We’ll schedule a free on-site estimate, diagnose the real problem, and give you a written price before any work starts. Same-day service is available for urgent repair calls in Piñon Hills and Ghost Controls in Adelanto.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Piñon Hills and the Inland Empire.