Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Rialto, CA | Ontario Gate Company
Ghost Controls gate repair in Rialto means fixing DIY-market swing and slide operators that the Inland Empire sun, Santa Ana gusts, and old block-wall ironwork have worked over in very specific ways. We service both ZIP codes here, 92376 and 92377, and the call profile is different on each side of town. If your Ghost Controls opener stopped mid-swing, won’t hold a charge, or threw your gate past its stop, call us at (855) 707-3634. We’re an independent service provider, not a Ghost Controls authorized dealer, and we diagnose the actual fault instead of steering you toward a replacement.
Why Rialto Residents Choose Us for Ghost Controls Service
We specialize exclusively in gates. That’s the whole trade. Every technician on our crew works on Ghost Controls operators regularly, the DIY-market swing and slide units you’d find at a big-box store, so we know their control boards, limit switches, and battery-backed harnesses better than most shops that only touch pro-install brands. Noel Carrasco, who owns Ontario Gate Company, learned the mechanical and electrical side of this work through the Industrial Technology program at Chaffey College and has been diagnosing gate operators across the Inland Empire for over two decades. His rule on every Ghost Controls call is simple: know what you’re looking at before you touch it.
When we show up in Rialto, that means we’re already checking for the failure patterns these units are known for in this specific climate: baked battery packs, loose limit settings, and post brackets that have worked free on rusted iron. You get a technician who has seen your exact problem on your exact equipment, not someone paging through a manual on your driveway. We’re local enough to reach both the older 92376 streets near the 210 and the newer 92377 subdivisions without a half-day wait.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Rialto
- Battery backup packs that won’t hold charge. Rialto’s summer heat cycles are brutal on sealed lead-acid and lithium packs inside Ghost Controls DC units. After a couple of Inland Empire summers, the pack dies, and the gate only works when the panel has clean power. Then a power flicker hits and the gate is dead in the open position.
- Control board and limit-switch faults on swing operators. We see Ghost Controls swing units in Rialto that throw the gate past its stop or reverse mid-travel. This is a board or limit-switch fault, not a motor failure, and it’s usually a repair, not a replacement.
- Arm brackets and post mounts that sag on older 92376 iron gates. The original block-wall-and-wrought-iron gate at a mid-century Rialto home has had decades of valley heat working on its welds and post anchors. The Ghost Controls arm bracket pulls loose, the gate sags, and the opener struggles or binds. The operator may be fine. The post is the problem.
- Remote and keypad receivers losing pairing or range. After a Rialto summer, receivers can drop their pairing or lose range, especially after voltage dips. Homeowners often assume the motor is dead. More often it’s the receiver or the keypad, and we can re-pair or replace it without touching the arm.
- Solar-compatible DC kits that stop recovering after Santa Ana wind events. A Ghost Controls solar kit on a north-side 92377 driveway gets hammered by wind gusts that push the gate panel and make the operator work harder. If the battery is weak, the gate won’t recover after the wind dies down. We diagnose whether it’s the panel, the pack, or the board.
Ghost Controls Service in Rialto: What Local Conditions Mean for Your Equipment
Rialto’s gate repair market is split down the middle, and it changes which Ghost Controls failure you’re most likely dealing with. In the older 92376 core south of the 210, the typical call is a rusted original block-wall gate with wrought-iron panels, a manual swing setup someone added a Ghost Controls opener to years ago. The post has softened or rusted, the bracket is loose, and the arm is binding. That’s a post-and-hinge repair before any operator work will hold. On the north side in 92377, the homes are newer, the lots are wider, and the driveway gates are automatic from the start, often slide or dual-swing units under HOA aesthetic rules. Those get knocked offline by Santa Ana gusts and power flickers, then won’t recover because the battery backup has cooked through one too many Inland Empire summers. Same brand, same city, two very different repair calls. When we dispatch to Rialto, we’re already thinking about which side of the 210 you’re on, because it tells us what to bring on the truck.
Ghost Controls Models & Products We Service in Rialto
We service the full Ghost Controls residential line: the Heavy-Duty Single Swing (AXS), the Standard-Duty Single Swing (TSS), the Dual Swing (TDS) two-gate opener, and the solar-compatible DC swing kits with tube-style arms. We keep genuine Ghost Controls boards, arms, and battery packs in stock for units worth keeping, and we use proven aftermarket remotes, keypads, and batteries where OEM cost doesn’t justify itself. That’s the honest approach: a solid Ghost Controls swing unit with a fried board or dead battery is a repair. A rusted, undersized post that has already cracked a bracket needs post-and-hinge work first, or no operator will stay reliable. Our stance is simple. Repair what’s worth keeping; replace what isn’t; tell you the truth either way.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Rialto
Serving Rialto, CA — Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Rialto
The most common cause is a battery backup pack that no longer holds a charge. After Rialto heat cycles cook the pack, the operator can’t ride through a power flicker, and the gate stays dead even after power returns. We check the battery first, then the control board for limit faults. Call (855) 707-3634 and we’ll send a tech to test both on-site.
We work on both. The older 92376 iron gates in Rialto usually need post-and-hinge work before the operator can stay reliable, because decades of valley heat have rusted the post and loosened the bracket. We’ll assess the whole assembly, not just the motor. If the post is solid, we repair the Ghost Controls unit. If the post is gone, we’ll tell you that first.
Yes. We pair, program, and test remotes and keypads to Ghost Controls in Fontana and Rialto every week. Summer heat and voltage dips can make existing remotes lose pairing or range, and in most cases we can re-pair your existing unit or add a new one on the same visit if the old remote is beyond saving.
A Ghost Controls swing opener with a bad board, dead battery, or limit fault is usually a repair. A unit mounted on a rusted post that has already cracked a bracket likely needs post-and-hinge work first, and sometimes full replacement makes more sense. We’ll give you the straight answer after diagnosing on-site, and you’ll have a written price before any work begins. Call (855) 707-3634 for a free estimate.
Yes. Most of the Ghost Controls service in Muscoy and Rialto we handle were installed by the homeowner or another company. We’re an independent shop with no Ghost Controls affiliation, so our only interest is finding the actual fault and fixing it. We don’t care who put it in.
Service Areas Near Rialto
We run Ghost Controls service calls throughout the Inland Empire and into the foothill communities around Rialto. Many of our crews are also out in Ghost Controls service in Riverside on any given week, and we cover the eastern edges near Ghost Controls service in El Cerrito Corona as well. Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, Los Serranos, and La Verne are all within our service day. You can see our full Rialto service area for details, and for everything Ghost Controls, we also handle Ghost Controls sales & service across the region.
Book Your Ghost Controls Service in Rialto Today
If your Ghost Controls gate isn’t running right, call us at (855) 707-3634. We’ll send a technician who knows the unit and knows San Bernardino Ghost Controls service conditions too. Free estimates, price agreed before work starts, and same-day availability on most repair calls in 92376 and 92377.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Rialto and the Inland Empire with gate repair, electric gate repair, and gate installation.