Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Del Mar, CA
Gate installation in Del Mar means working on custom wrought iron, glass, and privacy-slat designs set into bluff-top and hillside lots where marine salt is a constant. We install automatic driveway gates, courtyard entries, and pool enclosures that have to look right on an architect-designed home and survive ocean air without seizing. Ontario Gate Company has served Del Mar since 2011, and our gate-only focus means the hardware we specify here is chosen for corrosion resistance first, not whatever comes off the truck. Call (855) 707-3634 for a free estimate on any gate installation in Del Mar.
Why Del Mar Homes Are Different
Del Mar’s housing stock is not tract-standard. Most properties are mid-century or contemporary custom builds on canyon slopes, terrace streets, and ocean-facing bluffs, and their gates are proportioned to match. A standard six-foot iron driveway gate off the shelf looks wrong against a glass-and-steel façade, so much of what we do in Del Mar is built or fabricated to match the existing architecture. We see a lot of ornamental iron with custom scrollwork, cedar and composite privacy slats, and frameless glass pedestrian gates that need posts set into slope terrain where the grade changes twice across the opening.
The bigger factor is corrosion. Salt spray off the Pacific, combined with onshore humidity, attacks standard steel hinges, latches, and operator arms far faster than homeowners expect. On ocean-facing streets and along the Del Mar Terrace and Seagrove slopes, we routinely replace hardware that failed within a few seasons, not because it was defective but because it was never specified for this environment. Del Mar gate work is about matching the home’s design and then selecting stainless or hot-dip galvanized components so the repair lasts longer than the warranty on the wrong part would have.
Styles & brands we work with
Our Main Del Mar Services
Two calls dominate our Del Mar workload: mechanical repairs to gates that no longer swing or slide properly, and electric repairs to automatic operators that have quit or become unreliable. Both are covered in depth on their own pages.
Gate Repair in Del Mar
Most Del Mar gate repairs trace back to salt air: hinges that have seized, latch mechanisms corroded shut, wheels worn into the track on a sliding gate, or a sagging leaf that drags the driveway. The gate itself is often fine; it’s the hardware around it that has failed. We diagnose on-site, replace with corrosion-rated stainless or galvanized components where it matters, and restore the gate to full function. Gate Repair in Del Mar covers what we see most often, what it costs, and how fast we can get to it.
Electric Gate Repair in Del Mar
Automatic operators in Del Mar fail from moisture intrusion, board faults, and components that simply wear out: loop detectors, safety photo eyes, limit switches, and the operator arms themselves. Our technicians carry parts for BFT, Linear, Viking, and Ghost Controls, among others, so most electric gate issues are resolved on the first visit. Electric Gate Repair in Del Mar details common failures by brand, what repair costs look like, and when replacement makes more sense than repair.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Del Mar
Gate installation in Del Mar often replaces hardware on a gate that was built inland or was never rated for salt exposure. The work involves new or replacement gates, operators, posts, and hardware, specified for the coastal environment and the specific demands of each lot. We start every installation with a site visit to confirm grade, clearance, and existing electrical. Gate Installation covers our full installation service; the details below focus on what Del Mar homeowners should expect.
Automatic Gate Installation
Signs you need it
You need an automatic gate installation when the current operator is dead, unsafe, or not reliable enough for daily use, or when adding automation to a manual gate.
What it costs in Del Mar
Automatic gate installation in Del Mar typically falls between $2,850 and $7,500 for a complete single gate system, and $4,200 to $1,850 for double gates, with higher-end custom work reaching $8,500.
How we do it
We set corrosion-rated posts, mount the gate, install the operator and safety sensors, wire the control board, and test the full cycle repeatedly before we consider the job done.
Driveway Gate Installation
Signs you need it
You need a driveway gate installation when the current gate is rusted, sagging, or mechanically unsafe, or when you want a new driveway entry added to the property.
What it costs in Del Mar
A driveway gate installation in Del Mar runs from $2,850 for a standard single gate to $8,500 for a double gate or custom build, with ornamental work often reaching $12,000.
How we do it
We measure the opening, pour or set posts to handle the salt environment, fabricate or install the gate, and align hinges and latches to a full-close with no drag.
What Gate Installation Costs in Del Mar
| Item | Typical range in Del Mar |
|---|---|
| Automatic gate installation (single) | $2,850 – $7,500 |
| Automatic gate installation (double) | $4,200 – $8,500 |
| Driveway gate installation (standard) | $2,850 – $8,500 |
Prices above are labor and materials for the specified job and are always quoted and agreed before any work starts. Salt-resistant hardware and custom fabrication for ornamental or glass gates push Del Mar installations toward the upper end of these ranges.
How long does a gate installation take in Del Mar?
Most single gate installations are completed in one to two days once materials are on site. Custom fabrication, especially ornamental iron or glass panels, adds one to three weeks of build time before installation day arrives.
Do you handle the electrical and safety sensors for a new gate?
Yes. Every automatic gate installation includes the full electrical run, the operator, safety photo eyes, and edge sensors, and we test all safety functions as part of the installation. The price is quoted and agreed before work starts.
Brands We Service in Del Mar
We service and install BFT, Linear, Viking, and Ghost Controls operators, among others, and our Del Mar trucks carry parts for these brands so we’re not ordering your fix from a warehouse in another state. That brand-specific stock is what keeps most repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Del Mar, CA
| Service | Typical range in Del Mar |
|---|---|
| Garage door spring repair | $180 – $340 |
| Electric gate repair | $325 – $875 |
| Gate repair (general) | $250 – $900 |
| Electric gate operator replacement | $1,350 – $3,850 |
| Automatic gate installation (single) | $2,850 – $7,500 |
| Automatic gate installation (double) | $4,200 – $8,500 |
| Driveway gate installation (standard) | $2,850 – $8,500 |
Coastal salt exposure pushes Del Mar prices up when we’re replacing hardware that failed early or when the existing gate needs custom fabrication rather than a stock replacement. Every quote is itemized and agreed before any work starts, so there are no surprises on the invoice.
Neighborhoods We Serve in Del Mar
We work throughout the 92014 ZIP code, from the bluff-top properties off Camino Del Mar to the hillside drives in Del Mar Terrace and the gated entries along the Seagrove slopes. Our response time across Del Mar is typically same-day or next-day for gate repairs, with installations scheduled after a free on-site measure.
- Del Mar Terrace
- Seagrove
- Olde Del Mar
- Beach Colony
- Del Mar Heights
Service Area – Cities Near Del Mar
Our gate crews cover the coastal corridor and inland communities around Del Mar. We regularly work in Solana Beach, CA, Fairbanks Ranch, CA, Encinitas, CA, and Sorrento Valley, CA, where the same salt-air and custom-home conditions apply to gate work.
Serving Del Mar, CA — Our Local Coverage Area
We’re based in the Del Mar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Del Mar
For most gate repairs in Del Mar, we arrive same-day or next-day depending on call volume and your location. Emergency calls for a gate stuck open or pinned shut take priority, and our local parts stock means we usually complete the repair on the first visit.
Many Del Mar communities have architectural review requirements for gate changes, especially ocean-facing and hillside properties. We recommend checking with your HOA before installation, and we can provide specification sheets and hardware samples for your review.
Yes, we work with local fabricators who match the existing scrollwork, finish, and dimensions of custom Del Mar gates, so a repair blends with the original rather than standing out as a patch. Matching takes longer than a stock replacement, and we quote that time up front.
For any gate installation, repair, or electric gate work in Del Mar, call Ontario Gate Company at (855) 707-3634 for a free estimate. We’ll assess the salt exposure, measure the opening, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Del Mar Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Alma Garcia"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Yusuf Aziz"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes