Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Claremont
Electric gate repair in Claremont usually costs between $185 and $540 depending on whether the problem is a worn motor, a failed control board, or a gate that has drifted out of square on its hinges. Most repairs on the residential swing gates we see near the Village and the Claremont Colleges are diagnosed on-site and finished same-day. If your operator is stalling, grinding, or refusing to respond, call us at (855) 707-3634 and we’ll have a technician out to your Claremont property quickly.
We know Claremont’s gates because we work on them every week. The older Craftsman and Spanish Colonial homes off Indian Hill Boulevard and Foothill Boulevard don’t have generic aluminum gates. They have original iron and wood that needs a specialist who understands how to retrofit automation onto structures built in the 1920s and 1930s. That’s the work we do.
Key Takeaways:
- Same-day electric gate repair across all of Claremont, including 91711 and College Heights
- Free on-site estimates by phone at (855) 707-3634
- We retrofit operators onto existing period gates rather than ripping them out
- Technicians trained across LiftMaster, Viking, Ghost Controls, and DoorKing systems
Why Ontario Gate Company Is Claremont’s Preferred Electric Gate Repair Company
Claremont homeowners call us because we specialize exclusively in gates. That’s the whole trade. Our technicians don’t split their week between fences, garage doors, and the occasional gate call. Every truck we send into Claremont carries gate-specific diagnostic equipment, gate motors, control boards, photocells, and period-appropriate hardware. That narrow focus means when we arrive at a home off Mills Avenue, we’re not figuring out your brand for the first time. We know the common failure points of your LiftMaster swing arm or your Viking slide operator before we open the panel.
Noel Carrasco leads our team, and the standard he holds is simple: diagnose on-site, explain the problem in plain terms, and quote the repair before any work begins. Claremont property managers with commercial operators at the Industrial Park call us for the same reason homeowners do. One call, one correct diagnosis, one repair that holds.
Our response time to Claremont from our Ontario base is consistently under an hour for most residential calls. For gate outages at properties that need security restored immediately, that speed matters. We stock the parts our Claremont customers actually need, so a blown control board on a DoorKing operator doesn’t mean waiting a week for a shipment.
Styles & brands we work with
Gate Access Control in Claremont
Gate Access Control in Claremont means retrofitting and repairing the systems that let the right people in and keep everyone else out: keypads, intercoms, telephone entry, card readers, and the wiring that ties them to the gate operator. On the original wrought-iron gates near the Claremont Colleges, access control work usually means finding a way to mount a modern keypad or card reader without defacing hardware that’s been on the property since the Coolidge administration. We’ve done it many times.
Retrofit Keypads on Period Gates
Mounting a keypad onto an original iron gate takes more thought than drilling four holes. We position the unit where the code box doesn’t obscure ornamental scrollwork, and we run conduit along the inside face of the frame so the wiring profile stays clean. Wiring a keypad into a vintage gate post without cracking the masonry pilaster is exactly the kind of job where a generalist creates damage and a specialist avoids it.
Card Readers and Telephone Entry
Commercial gates on Claremont’s Foothill Boulevard corridor and the Auto Center Drive area often use card readers or telephone entry tied to a DoorKing or Elite operator. When those systems stop communicating, the gate either won’t open or stays open, which defeats the whole access-control purpose. We diagnose the full chain: reader, controller, wiring, operator input. Then we fix the weak link.
Access control repair in Claremont typically runs $165 to $480 depending on whether it’s a keypad failure, a wiring break, or a control board replacement. The quote is set before we start work.
Commercial Gate Operator in Claremont
Commercial Gate Operator service in Claremont covers slide gates, barrier arms, and heavy swing gates at apartment complexes, schools, and business properties across 91711. These operators see more cycles in a week than a residential gate sees in a year, so the failures are different: worn drive chains, failing limit switches, overheated motors, and loop detectors that no longer sense vehicles. We service and repair all of it.
Slide Gate Operators
A commercial slide gate on a Claremont property with heavy traffic needs its rollers, track, and operator all in alignment. When one fails, it cascades. We replace worn rollers, re-set the track, and repair the operator’s drive system. Our technicians carry replacement components for Viking, DoorKing, and Elite slide operators because those are the brands we see most often on commercial installations in the Inland Empire.
Loop Detectors and Safety Systems
Commercial operators must stop and reverse when a vehicle is in the path. In Claremont’s summer heat, loop detectors buried in asphalt can fail and leave a gate stuck open or closed. We test the loop, re-tune the detector, or replace the loop entirely when the wire has broken. A commercial gate operator without a working loop detector and working safety edges is a liability. We restore both.
Commercial gate operator repair in Claremont typically runs $280 to $850. Emergency service for a gate stuck open after hours is available. Call (855) 707-3634 and we’ll give you a clear price before any work starts.
Trusted Brands We Service in Claremont
Our techs in Claremont work on every major electric gate brand, with deep experience on Electric Gate Repair for LiftMaster, Viking, Ghost Controls, DoorKing, and Elite systems, among others. A LiftMaster residential swing operator fails differently than a Ghost Controls solar opener on a long driveway, and we arrive knowing the difference. We keep common brand-specific parts ready for Claremont service calls: control boards, limit switches, remotes, photocells, and receiver modules. If we have to order something unusual, we tell you the timeline up front. For the period gates near the Village, that often means sourcing or fabricating hardware that matches rather than bolting on whatever’s on the shelf.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Claremont Homes
- Post lean on original hinge posts. Claremont’s older masonry pilasters and wood posts were set long before anyone imagined a 300-pound automatic swing gate. Over decades, soil movement and Santa Ana wind load lean the post, the gate sags, and the LiftMaster arm binds. We reset the post footing and correct the sag before the operator destroys itself.
- Summer heat and sun-cracked wood panels. Intense Inland Empire sun dries out original wood gates on Craftsman properties near the colleges. Hairline cracks become splits, the gate loses structural stiffness, and the operator strains against a panel that’s flexing. We repair or replace the affected boards before re-tuning the operator’s limits.
- Rain-swollen wood and rusted steel. When Claremont gets its winter rain, old wood gates absorb moisture and get heavier. That weight change throws off the operator’s force settings so the gate stalls halfway. Unprotected steel hardware rusts. We service the hardware, re-balance the gate, and re-set the limits.
- Failed safety photocells. Older systems near the Village sometimes have no visible safety sensors at all, which is a real problem, or the installed photocells have failed from sun exposure and dust. We install and align current safety sensors so the gate reverses if a child or pet is in the path.
Pricing for Electric Gate Repair in Claremont, CA
Here’s what Claremont homeowners can expect to pay for the most common repairs. A gate motor repair typically runs $240 to $480. Gate opener repair, which might include a receiver or remote pairing, runs $120 to $240. Keypad replacement and reprogramming runs $145 to $260. Safety sensor replacement runs $125 to $220. Control board replacement runs $280 to $540 depending on the brand and board. These are real ranges for this market, not national averages.
What pushes a job higher: water damage inside the operator housing, a post footing that needs real structural work, or a specialty board for a commercial operator. We quote the job from the truck, approve it with you, and the price doesn’t change unless you add scope. That’s how we work. Call (855) 707-3634 for a straight number on your specific gate.
We Also Serve Cities Near Claremont
Our electric gate repair coverage extends from our Ontario shop into the surrounding foothill communities. If you’re in Montclair, La Verne, Upland, or San Antonio Heights, the same certified technicians handle your repair. You can find details on our Electric Gate Repair in Claremont page, or just call us directly and we’ll tell you when we can be there.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Claremont
Yes. This is the most common retrofit we do in Claremont. The existing gate stays. We add the operator arm, mount the control box discreetly, and run wiring through or beside the original post without damaging the masonry pilaster. If the hinge post is leaning or the footing is soft, we correct that first, because an operator on a failing post will tear itself apart. Call (855) 707-3634 and we’ll assess your specific gate and post condition.
Yes, it’s a real problem. A powered gate without working safety reverse means a child or pet in the gate’s path can be struck or pinned. On older Claremont properties, original operators were sometimes installed before photocells were standard. We strongly recommend retrofitting current safety sensors on any automated gate, and we check and align them on every service call. This is a safety repair, not a cosmetic upgrade.
Usually the gate itself, not the operator. Claremont’s summer sun dries out wood panels and loosens iron post hardware, so the gate drifts out of square and the LiftMaster or Ghost Controls arm binds against the added resistance. We square the gate, replace or tighten the hinge hardware, and re-set the operator’s travel limits. Sometimes the problem is a thermal overload in an older motor, which we replace. Either way, the fix starts with an on-site diagnosis.
Yes. Properties on Claremont’s northern and eastern edges, especially larger lots with long driveways, often run solar gate openers because running AC power to the gate is impractical. We service Ghost Controls and Mighty Mule solar systems, replace failed panels and batteries, and re-wire charge controllers. If the solar panel isn’t producing enough for the motor’s demand, we’ll tell you exactly what’s needed to restore full function.
Yes, and this is the core of what we do in Claremont’s historic districts. We routinely source period-appropriate strap hinges, finials, and latch hardware, and we work with local metal fabricators who can reproduce broken scrollwork on original iron gates. Wood gate panels are replaced with matching species and profile. No one gets a cheap off-the-shelf hinge on a 1920s Craftsman gate unless they ask for it. Call (855) 707-3634 and tell us what you’re looking at; we’ll match it.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Claremont and the Inland Empire.