Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Campo
Gate repair in Campo almost always starts with the ground, not the gate. The sandy, rocky soil under this high-desert corner of San Diego County lets posts shift and loosen long before a hinge or operator gives out, which is why we pull and re-set footings before we touch the hardware. If your driveway gate off Highway 94 won’t cycle, sags on the latch side, or has a solar operator faulting out, call us at (855) 707-3634. We service all of the 91906 zip code, from the ranch properties along Buckman Springs Road to the parcels west toward Lake Morena.
Why Ontario Gate Company Is Campo’s Preferred Gate Repair Company
We specialize exclusively in gates. That’s the whole trade. Every technician we send to Campo works on swing gates, slide gates, operators, and access systems all day, every day, not fences, not garage doors, not general contracting. Noel Carrasco built the company around that single focus, because a technician who works on nine gate brands daily diagnoses problems faster than someone who sees one automatic gate a month.
For Campo homeowners and property managers, that matters. A gate that won’t open on a ranch property means a blocked driveway, a livestock enclosure left unsecured, or a remote parcel with no practical way to get a vehicle in or out. We know the dirt roads off Highway 94, we know the wind and dust that eats slide-gate tracks, and we know that the nearest parts supplier is a long drive away. So we arrive with gate-specific diagnostic equipment and a plan, not a guess.
Our Gate Repair team carries parts for the brands most common on rural acreage here, including BFT, Linear, Viking, and Ghost Controls operators. That means fewer return trips and less downtime for a gate that’s your only way in.
Styles & brands we work with
Wrought Iron Gate Repair in Campo
Wrought iron gate repair in Campo means dealing with what the high desert does to steel. The sun bakes the paint off, monsoon moisture gets underneath, and rust seizes hinges and latches. We see it on ornamental driveway gates off Buckman Springs Road and on the pipe-and-ranch gates that guard long entries near the border. A typical wrought iron gate repair in Campo runs $220 – $480 depending on how much steel needs grinding, treating, and re-anchoring, plus the post work almost every job here starts with.
Rust Treatment and Reinforcing
Exposed steel doesn’t just look bad, it loses section thickness where salt-laden wind and occasional rain sit in the joints. We grind the rust back, treat the affected steel, and reinforce thinned sections before repainting, so the gate doesn’t snap at the hinge stile a season later.
Hinge Replacement and Latch Work
Rust seizes hinges first on the bottom side, where dust and moisture collect. We cut out the seized hardware, match the replacement to the weight of the gate leaf, and re-hang the gate so it swings clean without dragging on the gravel or compacted dirt of a Campo driveway.
Metal Gate Repair in Campo
Metal gate repair in Campo covers everything from wide ranch slide gates to the smaller pedestrian-style gates set into property-line fencing. The dominant failure on metal gates here is shifting support structure. When a post works loose in sandy ground, the gate leaf drops, the track goes out of line, and the operator strains against misalignment until something breaks. A typical metal gate repair in Campo runs $180 – $600. Post re-setting is the most common line item, followed by roller and track work.
Slide Gate Track and Roller Service
Blowing sand from sustained high-desert winds gets into rollers, guides, and rack-and-pinion gearing, turning smooth tracking into a grinding, binding mess. We clean the track, replace worn rollers, re-set the rack, and re-level the run so the operator isn’t fighting the gate on every cycle.
Post Pulling and Footing Re-Set
The repair that fixes most other problems. We pull the loose post, bore out the old footing, pour a new one at the right depth for the gate’s span and weight, and re-anchor the post. In Campo’s sandy soil, a shallow footing will be loose again inside a year, so we set it for the wind load and ground movement this area actually gets.
Trusted Brands We Service in Campo
Most gates in Campo run on operators from a handful of manufacturers, and we’re trained on all of them. If you have a BFT slide operator on a ranch entrance, a Linear arm on a residential swing, or a Viking or Ghost Controls unit on a solar-powered driveway gate, we know the common failure points for each before we arrive. That brand-specific knowledge means your operator gets diagnosed on-site instead of us swapping parts until something works. We stock the most-replaced components for the Campo market and can source anything else faster than a homeowner driving off the mountain to find it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Campo Homes
- Posts working loose in sandy ground. Sustained wind against a wide ranch gate applies constant leverage, and drought-hardened sandy soil gives way slowly. The gate sags, the latch stops engaging, and the operator faults on the safety sensor.
- Dust-coated solar panels killing operator power. Remote properties without mains rely on solar gate systems, and a layer of fine high-desert dust over the panel drops charge fast. The motor gets weak, the control board undervolts, and the gate opens halfway and stalls.
- Rack and pinion wear on slide gates. Blowing sand acts like lapping compound on steel rack teeth and drive gears. The gate chatters, then the operator trips its force limit and refuses to run.
- Rusted hinges and seized latches on iron gates. Sun and monsoon moisture do a number on exposed steel. The bottom hinge freezes first, bending the gate frame when the operator tries to force it open.
Pricing for Gate Repair in Campo, CA
Most gate repairs in Campo land between $180 and $600. A basic hinge replacement or latch fix on a single swing gate starts around $180 – $260. Re-setting a post with a proper concrete footing runs $250 – $450 per post, and it’s the most common repair we do out here. Slide gate track realignment with new rollers runs $300 – $600 depending on track length and how much sand has worn the hardware. Solar system repairs usually run $200 – $500, most of it the cost of a panel or battery matched to your operator brand. We quote the full price before any work starts. Call (855) 707-3634 and we’ll give you an exact number after seeing the gate.
We Also Serve Cities Near Campo
Our Gate Repair in Campo coverage extends to the neighboring communities along Highway 94 and the foothills beyond. We make regular runs to Pine Valley, Descanso, Alpine, and Harbison Canyon, so scheduling a repair or a new gate estimate doesn’t mean waiting for a crew from the city to find a free day.
Serving Campo, CA — Our Local Coverage Area
We’re based in the Campo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Campo
The sandy, rocky, drought-hardened soil here doesn’t hold shallow footings under wind load the way denser coastal soil does. Sustained high-desert winds push against a wide gate for hours, the ground slowly flexes around the footing, and the post walks out of vertical. By the time the gate sags, the post has usually moved enough to throw the hinges, latch, and operator track all out of line at once. A proper repair means pulling the post, re-boring the hole deeper, and pouring a footing sized for wind, not just for gate weight. Call (855) 707-3634 and we’ll come look at the post before you spend money on new hinges.
Yes. Solar-powered gate operators are standard on Campo parcels where running grid power to the driveway would cost thousands. We service solar systems from Viking, Ghost Controls, and BFT, and most faults we find are power issues, not mechanical ones: a dust-coated panel, a battery that’s lived past its cycle life, or an undersized system for the gate’s weight. We size the panel and battery to the gate and the number of cycles per day, not to a brochure number. We also run the safety wiring and access controls the same day the operator goes in.
Oversized gates need two things: an operator rated for the gate’s actual weight and span, and hardware that isn’t fighting the load. If the post is leaning, the hinges are binding, or the track has sand in it, no amount of motor will save it. We check the gate’s swing or slide effort first, then recommend either a higher-capacity operator, a counterbalance adjustment, or re-hanging the gate on proper bearings. For gates past a certain width, that often means a Viking or BFT slide system rather than a swing arm. We’ll tell you what the gate needs and what it costs before any work starts.
Yes. Rural Campo properties often need the gate to open automatically for residents but stay closed for everyone else, and that means access systems, not just an operator. We install and repair keypads, loop detectors for exit and entry, and safety photocells. Free-exit loops buried in sandy soil fail when the wire jacket abrades, and no one notices until the gate stops opening on approach. We diagnose those on-site with a loop tester and replace the loop, the detector, or both.
Any automatic gate operator should have working entrapment protection: safety sensors or contact edges that stop and reverse the gate if something is in the path, plus a properly set force limit. This is not a software feature you can skip. Campo’s wind and dust put extra strain on these devices, and a sensor that’s out of alignment or covered in grime will either false-trip constantly or stop protecting at all. We test the photocells and force settings on every repair we do, not just on new installs. If a safety device isn’t working, we won’t re-energize the operator until it’s fixed.
On a multi-acre parcel off Highway 94, a homeowner’s wide ranch slide gate had stopped tracking. The rack and pinion was grinding and the LiftMaster operator kept faulting out. We found the hinge-side post had worked loose in the sandy ground, so we pulled it, re-poured the post footing, re-leveled the track and re-set the rack, then re-verified the safety photocell before we left. The gate cycled clean and the driveway was secure again.
Most gate failures in Campo trace back to the ground, not the hardware. The sandy, rocky, drought-hardened soil combined with sustained high-desert winds works posts loose before hinges or operators give out, so a proper repair here usually starts with pulling and re-setting the post footing. With the nearest welder or parts supplier miles away down Highway 94, a gate that won’t cycle means a blocked driveway or an open livestock enclosure until parts can be sourced. We build our Campo service around that reality: we carry gate-specific parts on the truck, we understand solar systems on remote acreage, and we don’t schedule a repair without accounting for the wind that’s going to keep pushing on that gate for the next twenty years.
If your gate is down, sagging, or making noise it didn’t make last month, call Ontario Gate Company at (855) 707-3634 for a free estimate. We’ll diagnose the problem on-site, quote the full price before anything gets taken apart, and get your gate back in operation without a second visit.
Written by Noel Carrasco, Owner at Ontario Gate Company, providing gate repair across Campo and the Highway 94 corridor.