Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Claremont
Gate repair in Claremont usually falls into two categories: a gate that won’t open or close, or a gate that’s sagging, rusted, or binding. We fix both, and we fix them fast. Our Gate Repair team knows Claremont’s older gates well, from the wrought-iron pedestrian gates in the Village to the automatic driveway gates in newer developments off Base Line Road. If your gate is stuck, call (855) 707-3634 and we’ll get a technician out to you, usually the same day for urgent calls.
Why Ontario Gate Company Is Claremont’s Preferred Gate Repair Company
Claremont homeowners call us because we specialize exclusively in gates. That’s the whole trade. We’re not a general handyman service that fits gate work between fence jobs. Every technician on our crew is trained on gate hardware, gate automation, and gate safety systems. When a Claremont customer describes a symptom, we usually know the likely cause before we arrive because we’ve seen the same failure on hundreds of similar systems.
Our service area includes all of Claremont, from the historic neighborhoods around the Claremont Colleges to the newer subdivisions east of Towne Avenue. We know the streets, the housing stock, and the gate styles that dominate each area. That local familiarity means we carry the right parts on the truck and don’t waste your time with a diagnosis visit followed by a parts-order delay.
Customers in Claremont tell us the same thing: they want their gate back in operation quickly, without a repeat visit. That’s the standard we work to. Noel Carrasco, who runs Ontario Gate Company, holds the team to a simple rule: diagnose on-site, quote before work starts, and finish the repair the same day whenever parts allow.
Styles & brands we work with
Commercial Gate Repair in Claremont
Commercial Gate Repair in Claremont covers apartment complex gates, HOA entry gates, church and school parking gates, and the sliding security gates common on commercial properties along Foothill Boulevard and Arrow Highway. These are workhorse gates: they cycle hundreds of times a day, take abuse from vehicles and weather, and fail in predictable ways. We see worn rollers on slide gates, burned-out motors on high-cycle operators, and loop detectors that stop sensing vehicles, leaving delivery drivers stuck at the keypad.
Slide Gate Track and Roller Service
Claremont’s commercial slide gates run on steel tracks that collect debris, crack, and wear down over time. Rollers seize, the gate drags, and the motor overheats trying to push through the resistance. We replace rollers, repair or re-level track, and get the gate moving freely again so the operator isn’t fighting the load.
Operator and Access Control Diagnostics
Most commercial gate failures in Claremont trace back to the control board or an access device, not the gate itself. We carry boards and components for DoorKing, LiftMaster, FAAC, BFT, and Linear commercial operators. A typical commercial gate repair in Claremont runs $350 – $850 for motor, board, or sensor work, with more involved track and structural repairs running higher. Every commercial job gets a written quote before any work begins.
Iron Gate Repair in Claremont
Iron Gate Repair in Claremont is one of our most requested services, and for good reason. Claremont has a large stock of original wrought-iron gates on early-1900s Craftsman and Spanish Colonial homes, particularly in the neighborhoods south of the Village and around the Claremont Colleges. These gates are often 80 to 100 years old. The iron is robust, but the hinges, hinge posts, and latches are not. We regularly see cracked hinge posts where the gate mounts to a brick pilaster, rusted strap hinges that snap under the gate’s weight, and latch hardware that no longer engages because the gate has sagged half an inch.
Hinge and Post Reconstruction
The classic Claremont failure pattern is a sagging iron gate with a cracked hinge post. This is caused by Santa Ana winds torquing the gate against its mounting points, combined with winter rain rusting the hinge hardware. We reset the hinge post footing, re-weld or replace the strap hinges, and fabricate mounting plates that spread the load so the post doesn’t crack again. A hinge post reset and re-hang in Claremont typically runs $400 – $900 depending on post condition and whether we’re working with brick, stucco, or wood pilasters.
Weld and Rust Repair
Surface rust on Claremont iron gates is common because summer heat bakes the paint and winter rain penetrates the exposed metal. If your gate has rust through the bottom rail or a broken picket weld, we can usually repair it in place. Our techs grind out the corrosion, weld in replacement steel where needed, and repaint the repaired sections. For gates with extensive rust damage, replacement sections can be fabricated to match the existing pattern. Iron gate rust and weld repair in Claremont typically runs $250 – $600 per repair point, depending on access and the extent of the damage.
Trusted Brands We Service in Claremont
We stock parts for the operators Claremont homeowners actually have, including DoorKing, Elite, Viking, and Ghost Controls. Your Elite slide gate operator from the early 2000s is exactly the kind of system we still service. When a control board fails on an older Viking or DoorKing unit, we can sometimes board-swap on the spot because we keep common boards on the truck. When a Ghost Controls residential opener is acting up on a Claremont driveway gate, our techs know the common failure points and can flash or replace the control board without guessing. That brand-specific familiarity means less diagnostic time and fewer parts swaps.
Common Gate Repair Problems We See in Claremont Homes
- Rusted hinges and cracked hinge posts on original wrought-iron gates. Santa Ana winds torque these gates, and winter rain rusts the hardware. The result is a gate that sags, drags, and eventually won’t latch.
- Wood gates drying, cracking, and swelling. Claremont’s intense summer sun shrinks and cracks wood picket and plank gates, then winter rain swells the wood so the gate binds in its frame. It’s a seasonal cycle that only gets worse if hinges and post footings aren’t corrected.
- Obsolete control boards on older operators. We still see original LiftMaster and FAAC boards in Claremont that fail during heat waves or after a power surge. These boards are discontinued, but we can retrofit a modern board into the existing housing, which is usually cheaper than replacing the whole operator.
- Sagging gates that miss the latch and the safety sensor. Once a gate sags out of alignment, the photo sensors on either side no longer line up, the gate may reverse mid-cycle or refuse to close, and the latch won’t catch. It looks like an electrical problem. Half the time, it’s the gate, not the operator.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Claremont, CA
We quote every Claremont job before work begins, so you know the price going in and there’s no surprise on the invoice. Straightforward hinge and realignment work runs $180 – $340. Hinge post resets and re-welding run $400 – $900 depending on the post material and what needs to be fabricated. Control board retrofits for older operators run $350 – $750 including the board. Sensor alignment or replacement runs $125 – $250. These are Claremont market ranges for typical residential work. The price you’re quoted is the price you pay, agreed before we touch the gate. Call (855) 707-3634 for a free estimate on your specific gate.
We Also Serve Cities Near Claremont
Along with our Gate Repair in Claremont service, we regularly work in Montclair, La Verne, Upland, and San Antonio Heights. If you’re on the Claremont/Montclair border or in the foothills above Upland, we cover that too. Same gate-only specialization, same brands, same straight pricing.
Serving Claremont, CA — Our Local Coverage Area
We’re based in the Claremont area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Claremont
Yes. In most cases we can repair an original wrought-iron gate in place. We re-weld broken pickets and strap hinges, rebuild cracked hinge posts, and fabricate replacement hardware that matches the gate’s original style. Replacement is only necessary when the iron itself is rusted through in multiple structural points, and even then we can often reproduce the gate in a matching pattern. Call (855) 707-3634 and we’ll assess your specific gate.
Most wood gates with surface cracking and seasonal binding can be repaired. We replace rotted or split boards, re-set loose post footings, and swap rusted hinges with heavier-duty hardware that keeps the gate square through Claremont’s hot summers and rainy winters. Full replacement makes sense when the frame itself is rotted or when the gate has been planed and re-hung too many times to stay true. We’ll give you an honest assessment either way.
Any automatic gate operated by a motor in California must meet UL 325 safety requirements, which means working photo sensors or contact edges that stop and reverse the gate when something is in the path. If your older Claremont operator doesn’t have working safety devices, we can’t simply patch the motor and walk away. We’ll install the required sensors or edges as part of the repair and quote that work up front. Call (855) 707-3634 and we’ll walk you through what your gate needs.
Claremont’s weather works on gates from both directions. Summer heat dries out wood gates and bakes paint off iron, while Santa Ana winds stress hinges and posts. Winter rain swells wood, loosens footings, and accelerates rust on unprotected steel. The gates in the Village-adjacent historic neighborhoods take the worst of it because they’re older and often original. We inspect for both failure patterns on every Claremont call.
Yes. We routinely fabricate period-appropriate hinges, latches, and brackets for Claremont homes, especially in the historic districts where design review matters. We’ve replicated strap hinges, gate handles, and latch plates to match original 1920s hardware, and we can powder-coat or paint to blend with the existing finish. If you need a matching piece made, call (855) 707-3634 and we’ll discuss the details.
Preserving Historic Gate Character While Meeting Modern Safety Codes
Claremont is a college town with a historic, tree-lined Village core, and that shapes the gate work we do here more than in any of our nearby service cities. Because the Village-adjacent historic districts fall under design review, gate repairs often require matching existing wrought-iron or wood detailing rather than swapping in off-the-shelf parts. Homeowners and the city care about preserving the character of the streetscape. Our technicians routinely fabricate period-appropriate hardware on site so a repaired gate still looks like it belongs on the house.
On a 1920s Craftsman near the Claremont Colleges, our crew repaired a sagging pedestrian swing gate by first resetting the hinge post footing, then re-welding the original wrought-iron strap hinges and fabricating a matching latch to keep the gate aligned with the brick pilasters. The homeowner wanted to preserve the gate’s character, so we sourced a period-style handle and replaced a worn LiftMaster operator with a modern unit that met UL 325 safety requirements. That project is a good example of what this market demands: preserve the old, integrate the new, and don’t cut corners on safety.
This is the honest truth about older gates in Claremont. Some can be repaired and restored. Some have control boards that are discontinued but can be retrofitted. And some gates, particularly wood gates with rotted frames or iron gates rusted through at every rail, cost more to patch than to replace. We’ll tell you which category your gate falls into and give you a written price for either path. The goal is a gate that works reliably, looks right on your house, and meets current safety code. That’s the work we do every day in Claremont.
Contact Ontario Gate Company for Gate Repair in Claremont
If your gate is stuck, sagging, or refusing to close, call (855) 707-3634 now. We’ll get a gate specialist on the phone, schedule a time that works, and show up ready to diagnose on-site. Free estimates, upfront pricing, and the price we quote is the price you pay, agreed before any work starts.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Claremont and surrounding cities.