Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lake Arrowhead
A gate that won’t open or close in Lake Arrowhead isn’t a minor annoyance. It’s a security gap, an access problem, and during snow season, a genuine liability. Our team at Ontario Gate Company repairs automatic and manual gates throughout the 92352 area, and we know exactly how mountain conditions change the work. When you call (855) 707-3634, you’re reaching a gate specialist who has already diagnosed your brand of operator hundreds of times, not a generalist who’ll figure it out in your driveway.
Why Ontario Gate Company Is Lake Arrowhead’s Preferred Gate Repair Company
We are not a fence company that also fixes gates. We specialize exclusively in gates, which means every technician on our team and every part in our service vehicles is oriented around one trade. That focus matters in Lake Arrowhead, where a gate failure in January can leave a steep driveway unplowed and a cabin inaccessible. Our electric gate repair capability covers motors, control boards, safety sensors, and access systems for the brands installed throughout the Lake Arrowhead area. We arrive knowing the common failure points of your equipment, not guessing at them.
Property managers and second-home owners in Lake Arrowhead call us because our technicians carry gate-specific diagnostic gear and inventory parts that a general repair crew would have to order. A LiftMaster swing arm, a BFT control board, a Viking loop detector: these are items we keep on the truck because we know they fail in predictable ways up here. When a plow clips a gate arm near the Village or a frost cycle throws a hinge post out of alignment on a narrow lane off State Highway 173, our Gate Repair team has already seen that exact failure mode. That experience means shorter diagnosis, fewer parts swaps, and fewer return visits.
Styles & brands we work with
Wood Gate Repair in Lake Arrowhead
Wood Gate Repair in Lake Arrowhead is less about carpentry and more about understanding what snow and freeze-thaw cycles do to timber, hardware, and the post footings beneath them. We replace rotted stiles, re-hang sagging panels, and re-set hinge posts that winter weather has pushed out of plumb. A heavy, waterlogged gate panel puts strain on an automatic operator, and that strain burns out motors faster than any other single factor we see up here.
Rot, Snow Load, and Hardware Failure
Mountain cabins built twenty or thirty years ago often have wooden gates with hardware that was undersized for the climate. Snow sits against the lower rail for months. Freeze-thaw cycles open seams and let moisture into the core. We inspect the full assembly, not just the failing part, because a new hinge on a rotted post is a repair that won’t last the season.
Re-Hanging and Post Resets
Wood gate repair in Lake Arrowhead commonly includes boring out and re-filling hinge screw holes with structural epoxy, replacing split rails, and adding steel reinforcement inside the panel where it doesn’t show. If the post has moved, we re-set it with a deeper footing so the next freeze cycle doesn’t push it back out.
Typical wood gate repair in the Lake Arrowhead market runs $180 to $420 for hardware and panel work, and $450 to $1,100 when a post has to be dug out and re-set. We quote the full price before any work starts.
Driveway Gate Repair in Lake Arrowhead
Driveway Gate Repair in Lake Arrowhead usually involves an automated gate that has stopped responding or is dragging, beeping, or reversing on its own. Long, sloped driveways are the standard in this area, and they are precisely the conditions that expose operator problems early. When a gate travels fine in summer but drags in winter, the problem is usually a hinge post lifted by frost heave, not a failing motor. Replacing the operator would be a waste, and we’ll tell you that plainly.
Automated Gate Operators on Sloped Lots
Steep driveways mean the operator is pushing more weight than it was rated for, especially when snow loads are on the gate. We inspect the full travel path, check the limit settings, and test the safety reverse under load. A gate that stops halfway up a slope is a common call from the neighborhoods around Lake Arrowhead Country Club and the roads branching off Grass Valley Road.
Solar-Powered Systems and Winter Charging
Newer builds in Lake Arrowhead often use solar-powered gate openers, since running line power hundreds of feet down a driveway is expensive. The problem is short winter days and panel shading from pine canopy. A solar battery starved for charge will cause the gate to open slowly, stop mid-cycle, or fail to close. We test the battery’s actual state of health, not just its surface voltage, and we’ll tell you if the panel angle or tree cover is working against the system.
Driveway gate repair in Lake Arrowhead typically runs $160 to $390 for logic board, sensor, or limit switch work, and $500 to $1,200 for motor, arm, or post replacement. Every quote is agreed before work begins.
Trusted Brands We Service in Lake Arrowhead
Our technicians are trained across nine gate and operator brands, so when we show up in Lake Arrowhead we’re typically looking at equipment we already know. We service Viking and Linear operators that are common on older local installs, along with BFT and Ghost Controls systems that turn up on newer solar-powered gates. We stock brand-specific control boards, remotes, photo-eyes, and hinge hardware, which means a repair that starts on Tuesday doesn’t wait until Thursday waiting on a part to ship. If your operator is from a brand we service, chances are the part it needs is already in a van headed up Highway 18.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lake Arrowhead Homes
- Frost-heaved hinge posts. The freeze-thaw cycles at 5,000 feet push post footings out of plumb every few winters. A gate that drags only in winter almost always has a moved post, not a bad operator.
- Plow-clipped swing arms and tracks. On narrow, tree-lined private lanes around the lake, plow drivers have little room to maneuver. A clipped arm or bent track is the most common post-storm repair call we get.
- Solar battery starvation. Short winter days and shaded panels mean solar openers run out of usable charge. The gate moves slowly, stops mid-travel, or fails to hold closed.
- UL 325 safety edge faults. Mountain temperature swings and moisture cause false stops and reversing issues. We diagnose these on-site rather than replacing parts blindly.
Pricing for Gate Repair in Lake Arrowhead, CA
Gate repair pricing in Lake Arrowhead reflects the age of the equipment, the access, and the season. Here are the ranges we quote in the 92352 area:
- Service call and on-site diagnosis: $75 – $125, credited toward the repair if we do the work.
- Hinge, latch, and hardware repair: $140 – $320.
- Control board or logic board replacement: $220 – $550 installed, depending on the brand.
- Operator motor or swing arm replacement: $400 – $950 installed.
- Frost-heaved post reset with re-pour: $450 – $1,100, including concrete and hardware.
- Full automatic gate system replacement: $2,900 – $7,500 for residential systems, depending on operator type, panel size, and power setup.
Snow season can add urgency but we don’t inflate prices for emergency calls. You’ll get the exact price before any work starts, and the number we quote is the number on the invoice. Call (855) 707-3634 for a free estimate.
One thing that makes Lake Arrowhead different from flatland gate work: at roughly 5,000 feet, the freeze-thaw cycle is the single biggest driver of gate failure. Water gets into the footing, freezes, expands, and lifts the post a fraction of an inch. Repeat that a few dozen times and the gate drags, binds, or stops sealing correctly. A technician unfamiliar with mountain frost heave will replace the operator and leave the real problem sitting in the ground. We re-set and re-pour the post. That’s the difference between a repair that lasts and a callback in March.
We Also Serve Cities Near Lake Arrowhead
Our gate repair service in Lake Arrowhead extends to the surrounding mountain communities. We regularly work in Crestline, Running Springs, Highland, and Muscoy. If you’re on a private lane off Rim of the World Highway or managing a cabin community up the 18, call us. We know the roads and we know how these gates fail up here. For a full picture of our coverage, see Gate Repair in Lake Arrowhead.
Serving Lake Arrowhead, CA — Our Local Coverage Area
We’re based in the Lake Arrowhead area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Arrowhead
Winter-only dragging is almost always a frost-heaved hinge post. At roughly 5,000 feet, water gets under the footing, freezes, and lifts the post a quarter inch or more. That throws the gate out of alignment and it drags on the low side. The fix is to re-set the post with a deeper footing, not to buy a new operator. Call (855) 707-3634 and we’ll confirm it with a level and a tape measure on-site.
It can, but only with a properly sized panel, a clear southern exposure, and a battery that’s actually holding charge. Most solar gate failures up here come down to two things: an undersized panel that can’t keep up with short winter days, and a battery that tests at voltage but has no real capacity left. We check both before we sell you a new panel or a new battery. If your driveway is heavily treed, we’ll tell you the honest limits of solar and what an AC or low-voltage run would cost instead.
Sag at the center of a double-driveway gate usually means the hinge-side post has moved or the hinge hardware has worn. We re-set the post if it’s moved, replace the hinges and hinge bolts, and add a mid-rail stiffener inside the panel where needed. Just replacing the panel without addressing the post means the new panel starts sagging the same way inside a year.
If a plow has clipped the arm or the panel once, it’ll happen again unless the gate’s clearances and the operator’s travel path are adjusted. We check the physical post spacing, re-set anything out of plumb, and confirm the operator is running a current safety edge system so the gate reverses instead of resisting the plow. We’ll also set the open and closed limits so the panel doesn’t linger in the plow’s line.
Yes. Under UL 325, any automatically operated gate in Lake Arrowhead must have entrapment protection devices, which means photo-eyes or a monitored safety edge that stops and reverses the gate when it contacts an obstruction. If your system predates UL 325 compliance or the safety devices have failed, we can retrofit it. We test the reverse function on every repair call, regardless of what the gate came in for.
Call (855) 707-3634 and tell us what your gate is doing. We’ll give you a straight answer about the likely cause, the cost to fix it, and when we can be up the hill to do the work. Estimates are free, and the price is agreed before we turn a wrench.
Written by Noel Carrasco, Owner at Ontario Gate Company, providing gate repair and electric gate repair throughout Lake Arrowhead and the surrounding mountain communities.