Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Murrieta, CA
Gate installation in Murrieta usually means a 12 to 16 foot steel tube driveway gate sized for horse trailers and RVs, not a door-width walk gate. Murrieta was built out in the 1990s and 2000s as large single-family tract and semi-custom homes on half-acre-plus lots, so the standard job here involves heavier steel, automatic openers, and post footings that can hold up to decomposed granite and shifting soil. If you’re planning a new gate or replacing a failed one, call Ontario Gate Company at (855) 707-3634 for a free measure and a written price.
Why Murrieta Homes Are Different
Murrieta sits in inland Inland Empire horse-and-hobby country. A large share of the homes in the 92562 and 92563 ZIP codes are on lots big enough to run double gates, RV gates, and corral or arena gates in communities like Bear Valley and Los Alamos Hills. That changes the work. A gate here is not a decorative front yard fixture, it is a structural piece of steel or redwood that has to swing true across 12 feet or more while holding back wind, heat, and the weight of its own frame. Gates in Murrieta are sized for horse trailers and travel trailers, which means the posts, hinges, and openers all have to be rated for far more than a pedestrian gate.
Murrieta’s climate also works against gate hardware. The hot, dry inland summers and Santa Ana wind events bake and dry-split wood gates, warp steel frames, and loosen hinge and latch hardware. Then the wet winter storms drive soil movement that throws gate posts out of plumb. That pattern, repeated over 20 or 30 years, is why so many Murrieta gates drag on the ground even though the latch still catches. We see that exact failure regularly in horse property pockets off the I-15 corridor, where decomposed granite driveways accelerate the post-settling problem.
Styles & brands we work with
Our Main Murrieta Services
Murrieta homeowners and property managers call us about two things most often: mechanical gate failure and electric or automated gate failure. Both are covered below, each with its own dedicated Murrieta page.
Gate Repair in Murrieta
A Murrieta gate that drags, sticks, or lags on its hinges is usually a post alignment or hinge wear problem, not a simple hardware swap. We see it most on the 12 to 16 foot steel tube driveway gates out in the horse property neighborhoods, where decomposed granite driveways and seasonal soil expansion push welded hinge posts out of plumb over time. The gate still latches, but it grounds out and gets worse every season. The fix starts with footing work and post stabilization, not a new hinge. Gate Repair in Murrieta covers the full diagnostic and repair process, including steel tube straightening, hinge re-welding, and latch realignment.
Electric Gate Repair in Murrieta
Electric gate repair in Murrieta runs heavy on control boards, loop detectors, and safety sensors, not just motors. Murrieta’s hot summers and Santa Ana wind events stress operator electronics, and the wet winter months bring ground moisture that corrodes underground sensor wiring. We arrive with diagnostic equipment and brand-specific knowledge across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we diagnose on-site rather than swapping parts on a guess. Electric Gate Repair in Murrieta covers motors, control boards, safety edges, and access control integration for residential and commercial systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Murrieta
Gate installation in Murrieta means building a gate that can survive 100-degree summers, Santa Ana wind, and wet winter soil movement, and still swing true for a horse trailer or RV. Most of the work we do is on properties in the 92562 and 92563 ZIP codes where the lot is half an acre or more and the gate is the primary vehicle access, not a side detail. From automatic openers to corral and arena access, the installation has to be engineered for the weight, the wind, and the soil. Gate Installation is a core service we handle start to finish, from footing to final opener programming.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand multiple times a day, or you have a manual gate on a lot with horses, trailers, or contractors coming and going.
What it costs in Murrieta
Automatic gate installation in Murrieta typically runs $4,000 to $12,000 complete with opener, safety devices, and controls, depending on gate weight and opener type.
How we do it
We set the posts and footings, hang the gate, mount the opener, install safety photo eyes and edges, then program remotes and keypads before testing the full cycle.
Driveway Gate Installation
Signs you need it
Your driveway has no gate and you need controlled vehicle access for security, privacy, or keeping animals contained on the property.
What it costs in Murrieta
Driveway gate installation in Murrieta typically costs $3,000 to $10,000 for a steel tube or ornamental gate with posts, hinges, and latch, before opener and access controls.
How we do it
We measure the opening and vehicle clearances, pour or set post footings below the decomposed granite, hang and align the gate, then weld or bolt hardware rated for the gate’s weight.
What Gate Installation Costs in Murrieta
| Item | Typical range in Murrieta |
|---|---|
| Steel tube driveway gate, 12-16 ft, installed | $3,000 – $8,000 |
| Automatic opener with safety devices and controls | $2,500 – $5,000 |
| Full automatic gate system, complete | $4,000 – $12,000 |
How long does gate installation take in Murrieta?
Most standard driveway gate installations in Murrieta take one to three days, depending on footing cure time, gate size, and whether we’re running new power for an opener. Complex automatic systems with access controls may run longer.
Do you handle HOA specs for Murrieta gate installations?
Yes. Many Murrieta HOA communities have specific requirements for gate style, height, and finish, especially on perimeter and pool gates. We match the association spec from the first measure so the installation passes review. Call (855) 707-3634 for a free measure.
Brands We Service in Murrieta
Our technicians carry parts and diagnostic knowledge for Viking, Ghost Controls, DoorKing, and Elite systems, plus the rest of our nine trained brands. Because we stock gate-specific components rather than multi-trade inventory, we can usually complete repairs in a single visit rather than ordering parts and returning a week later. Our brands page covers the full list and what we keep on hand.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Murrieta, CA
| Service | Typical range in Murrieta |
|---|---|
| Gate opener motor replacement | $750 – $2,500 |
| Control board replacement | $600 – $1,800 |
| Safety sensor or photo eye replacement | $250 – $650 |
| Hinge and latch repair | $200 – $800 |
| Gate post stabilization and realignment | $400 – $1,500 |
| Automatic gate installation | $4,000 – $12,000 |
| Driveway gate installation | $3,000 – $10,000 |
| Steel tube driveway gate, 12-16 ft | $3,000 – $8,000 |
| Full diagnostic service call | $89 – $149 |
In Murrieta, two things push a gate job above the middle of those ranges: post footings that have to be re-poured because decomposed granite and seasonal soil movement destroyed the original, and gate sizes that run 12 to 16 feet for horse trailer or RV access. Every price is quoted and agreed before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Murrieta
Our service area covers all of Murrieta and the surrounding communities. We work regularly in the established tract neighborhoods and the larger horse-property lots throughout the city.
- Bear Valley
- Los Alamos Hills
- The Reserve
- Central Park
- Oak Creek
Most Murrieta neighborhoods are within a short drive, and we schedule repairs across the area throughout the week, with emergency service available for gates that won’t close or secure properly.
Service Area – Cities Near Murrieta
Our Murrieta team also covers the communities around the city, including Murrieta Hot Springs, CA to the north and Wildomar, CA to the west. We regularly work in Temecula, CA where horse property and vineyard gates share the same soil and wind conditions, and Sedco Hills, CA where hillside lots bring their own post and alignment challenges. Call (855) 707-3634 to confirm service in your area.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Murrieta
We schedule repairs across Murrieta throughout the week, and most repair calls are handled same day or next day depending on call volume. Emergency service for gates that won’t close or secure is available. Call (855) 707-3634 and tell us what the gate is doing.
Most standard residential driveway gate installations in Murrieta do not require a city permit, but HOA communities often have their own approval process for gate style, height, and finish. We can match your association spec from the first measure. Check with your HOA before installation.
Yes. We cover all three Murrieta ZIP codes: 92562, 92563, and 92564, plus the surrounding communities. Our service area includes everything from the horse property pockets off the I-15 corridor to the newer southwest growth areas. Call (855) 707-3634 to confirm your address.
If your Murrieta gate is dragging, stuck, or the opener has quit, call Ontario Gate Company at (855) 707-3634 for a free estimate. We specialize exclusively in gates, from mechanical repair to electric gate repair to full installation.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murrieta Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Nabil Karam"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Allen Nguyen