Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Palm Springs, CA
Gate installation in Palm Springs means working with mid-century modern homes, desert sun, and gates that were often built as part of the original architecture. Ontario Gate Company specializes exclusively in gates, so when you call (855) 707-3634 you’ll get a technician who has installed and repaired automatic gate systems across every Palm Springs neighborhood from Deepwell to Little Tuscany. We know which operators hold up in 115-degree heat and which hardware corrodes fastest in dry desert air.
Why Palm Springs Homes Are Different
Palm Springs is a mid-century modern mecca, and its gates are often original decorative metal or slatted-wood privacy gates from the 1950s through 1970s that are now corroding or warping from decades of desert sun. Gate work here is as much about preserving period-correct style as fixing function. A wrought-iron gate in Deepwell isn’t just a security barrier; it’s part of the home’s architectural identity, and swapping in an off-the-shelf panel would look wrong immediately.
The housing stock across ZIP codes 92262, 92263, 92264, and 92292 runs heavily toward ranch-style and mid-century homes built between the 1940s and 1970s. Many still have their original redwood or steel gates. The extreme heat and intense UV exposure make metal gates too hot to touch by mid-afternoon in summer, accelerate rust on steel, and bake wood finishes until they crack and peel. Dry air warps untreated wood within a couple of seasons. In neighborhoods like Twin Palms and Vista Las Palmas, gates were designed as part of the original mid-century aesthetic, so repairs often require matching vintage patterns or sourcing custom replacements rather than using generic parts from a big-box store.
Styles & brands we work with
Our Main Palm Springs Services
Most Palm Springs homeowners call us for one of two things: a gate that won’t open or close, or an electric operator that has stopped responding. Both are covered below.
Gate Repair in Palm Springs
Gate repair in Palm Springs usually starts with a sagging or seized hinge, a twisted steel frame, or a wood gate that has warped so badly it no longer clears the latch post. We diagnose on-site, and because we’re a gate-only company, we can often fix the problem the same day with parts on the truck. For the full scope of what we repair, see our Gate Repair in Palm Springs page.
Electric Gate Repair in Palm Springs
Electric gate repair in Palm Springs is our core specialty. Desert heat stresses control boards and motors, and UV exposure breaks down sensor housings and wiring insulation faster than in coastal climates. We service Viking, Ghost Controls, and DoorKing operators regularly, and we carry common replacement boards and sensors so we’re not ordering parts and making you wait. Learn more on our Electric Gate Repair in Palm Springs page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Palm Springs
A new gate installation in Palm Springs has to handle two competing demands: it needs to look like it belongs on a mid-century modern property, and it needs to stand up to the harshest sun and heat in the Coachella Valley. Most of the homes we work on were built between the 1940s and 1970s, and their original gates are past saving. We help homeowners and property managers choose materials and operators that match the architecture and survive the desert. Our Gate Installation work covers everything from a simple manual driveway gate to a fully automated sliding gate with access control.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual gate, or you want to control access from inside the house.
What it costs in Palm Springs
Automatic gate installation in Palm Springs typically runs $3,000 to $9,000 depending on gate size, operator type, and whether you’re adding a keypad or intercom.
How we do it
We measure the opening, spec the right operator for the gate’s weight and swing, set the post and mounting hardware, run power, install safety sensors and a control board, then test the full cycle repeatedly under load.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is tight enough that a swing gate would block the street or the car.
What it costs in Palm Springs
Sliding gate installation in Palm Springs typically runs $4,000 to $12,000 because it requires a steel track, cantilever rollers, and a heavier operator.
How we do it
We pour or anchor the track foundation, hang the gate on rollers, mount the motor and rack, wire the limits and safety eyes, and tune the travel speed so it opens smoothly every time.
Driveway Gate Installation
Signs you need it
Your property has no gate at the street entrance, or the existing one is too narrow for modern vehicles.
What it costs in Palm Springs
Driveway gate installation in Palm Springs typically starts around $2,500 for a basic single swing gate and goes up from there based on width, automation, and material.
How we do it
We check the approach angle and driveway grade, anchor beefy hinge posts in concrete, hang the gate so it clears the ground through its full arc, and install a heavy-duty latch or maglock.
What Gate Installation Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Basic manual driveway gate | $2,500 – $5,000 |
| Automatic gate with operator | $3,000 – $9,000 |
| Sliding automatic gate | $4,000 – $12,000 |
Do I need a permit for a new gate in Palm Springs?
Most residential gate replacements don’t require a permit in Palm Springs, but any new automatic gate within a front setback or near a sidewalk may trigger a review. We’ll tell you before any work starts. Call (855) 707-3634 for specifics on your street.
How long does a gate installation take in Palm Springs?
Most installations take one to two days on-site, plus a few days for any custom panel fabrication if you’re matching a vintage Palm Springs design. We’ll give you a written schedule with your quote so there are no surprises.
Brands We Service in Palm Springs
Your DoorKing operator, your Elite slide motor, your Ghost Controls swing arm – we service all of them and more. We’re trained on nine major gate and operator brands, and our vans carry common boards, sensors, and remote controls so we’re not ordering parts and making you wait. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Palm Springs, CA
| Service | Typical range in Palm Springs |
|---|---|
| Basic manual driveway gate installation | $2,500 – $5,000 |
| Automatic gate installation (swing, full system) | $3,000 – $9,000 |
| Sliding gate installation (motorized) | $4,000 – $12,000 |
| Gate opener motor replacement | $450 – $1,800 |
| Control board replacement | $300 – $900 |
| Sensor or photoelectric eye replacement | $200 – $600 |
| Access system integration (keypad, intercom, cell unit) | $500 – $2,500 |
| Hinge and hardware repair | $150 – $600 |
| Gate frame straightening or welding | $300 – $1,000 |
| Full site diagnostic | $90 – $150 |
What pushes price up in Palm Springs is the age of the house. Older mid-century gates often need custom metalwork or period-matched panels, and that fabrication time and material gets quoted upfront. Every price we give is quoted and agreed before any work starts, so you’ll never get an invoice bigger than the number you approved.
Neighborhoods We Serve in Palm Springs
We work throughout Palm Springs, from the historic districts to the newer developments on the south end. Typical response time is same-day or next-day for most repair calls.
- Deepwell
- Twin Palms
- Vista Las Palmas
- Little Tuscany
- Sunrise Park
Service Area – Cities Near Palm Springs
We also serve the surrounding Coachella Valley communities. If you’re in Cathedral City, CA, Rancho Mirage, CA, Garnet, CA, or Desert Hot Springs, CA, we’ll send the same gate-specific technician and stocked van to your address.
Serving Palm Springs, CA — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Palm Springs
Most repair calls in Palm Springs get same-day or next-day service. If your gate is stuck open or won’t close, call (855) 707-3634 and we’ll give you a real arrival window, not a four-hour guess.
Many Palm Springs HOAs, especially in historic districts, have design review requirements for any visible gate change. We’ll work from your HOA’s spec sheet and match the existing neighborhood style so your project doesn’t get kicked back.
Yes. We install the gate, the operator, the safety sensors, and the access control as one system. Since we’re a gate-only company, there’s no separate electrician or general contractor to coordinate. The whole job is ours from the first measurement to the final test cycle.
Call Ontario Gate Company at (855) 707-3634 for a free estimate on any gate work in Palm Springs. We’ll quote the job before we start, and we’ll show up knowing your gate, your operator, and your neighborhood.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Springs Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker