Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Wrightwood, CA
Wrightwood gate installation comes down to one thing: the mountain dictates what gets built. At roughly 6,000 feet in the San Gabriel Mountains, a gate here has to survive snow load, freeze-thaw cycles, and steep driveways that would defeat hardware spec’d for flatland Southern California. Most Wrightwood homes sit on long rural lots with wide driveway entrances, and the mix of mid-century cabins, 1970s-90s vacation homes, and newer custom builds means no two gate jobs look the same. We’re Ontario Gate Company, a gate-only specialist serving Wrightwood since 2011. If you need a new gate built for mountain conditions, call (855) 707-3634 for a free on-site measure.
Why Wrightwood Homes Are Different
Wrightwood’s altitude changes everything about gate work. Heavy snowfall means a gate that works fine in September can fail in January because ice has jacked a post or a plowed snow bank has sheared a hinge pin. The freeze-thaw cycle moves concrete footings in ways flatland installers never plan for, which is why so many older Wrightwood gates lean or bind by their third winter. The housing stock compounds the issue: mid-century mountain cabins often have undersized or rotted wooden posts set shallow in rocky soil, posts that were never meant to carry the weight of an automated steel gate. Even newer custom builds sit on driveways steep enough that standard swing clearances don’t work, forcing a slide or a modified swing arc. And the unpaved sections of many Wrightwood lots mean a gate has to operate over ground that shifts seasonally. A gate company that only works the flat Inland Empire grid doesn’t see these failures. We do, every winter, and we build and repair accordingly.
Styles & brands we work with





Our Main Wrightwood Services
Most Wrightwood homeowners call us for one of two things: a gate that stopped working, or an operator that won’t respond. Both are covered below.
Gate Repair in Wrightwood
When a Wrightwood gate binds, sags, or won’t latch, the cause is usually mountain-specific: frost-heaved posts, snow-bent hinges, or a shear pin that gave way when a plow bank pushed against the leaf. We diagnose on-site, checking post plumb, hinge integrity, and ground clearance before touching anything else. On steep lots, repair often means re-setting posts deeper than the original install and adjusting the swing arc so the gate clears snow rather than dragging through it. Full details are on our dedicated page.

Electric Gate Repair in Wrightwood
Wrightwood’s cold snaps are hard on control boards and motors, and UV at altitude eats wiring insulation faster than down the hill. When an operator fails, we treat it as an electrical diagnostic, not a guess-and-swap: we check the board, the safety sensors, the loops, and the power supply before recommending any part. We service LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and most other major brands, which means your operator gets looked at by someone who knows its failure points. The full scope is on its own page.
Electric Gate Repair in Wrightwood

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Wrightwood
A new gate in Wrightwood has to be built for snow, slope, and the ground it stands on. Most of the cabins and vacation homes here were never set up for an automated gate, so installation usually means starting with the posts and the footing rather than hanging a leaf on whatever’s already there. On steep lots, we commonly recommend a sliding gate or a modified swing that keeps the leaf clear of snow drift. For a full look at how we handle new builds, see our Gate Installation service page. Call (855) 707-3634 and we’ll come measure your driveway and give you a written price before any work starts.
Automatic Gate Installation
Wrightwood homeowners adding automation to a driveway gate need an operator and a gate that can both handle freezing temperatures and heavy snow on the leaf.
Signs you need it
You’re opening and closing the gate by hand every time, or you’ve stopped using the gate because it’s too heavy to move through snow.
What it costs in Wrightwood
Rates follow our standard gate installation pricing, with the operator and control package adding to the base install cost.
How we do it
We set or verify the posts, install the gate leaf to correct clearance, mount the operator, run the power, and program limits and safety edges, all on-site and weather-tested.
Driveway Gate Installation
Wrightwood’s long rural driveways need wide gates, and the steep grades on many lots mean the gate has to move without grounding out when snow accumulates.
Signs you need it
Your existing gate opening is too narrow for your vehicles, or the current gate drags on the ground every winter.
What it costs in Wrightwood
Driveway gate installs fall within our standard installation range, with wider openings and steeper grades increasing materials and labor.
How we do it
We measure the driveway width and slope, set deep concrete footings appropriate to Wrightwood’s rocky soil, and hang the gate with clearance calculated for snow depth.
Sliding Gate Installation
On steep Wrightwood driveways, a swing gate often can’t work without scraping the uphill slope, so a sliding gate becomes the only practical option.
Signs you need it
Your driveway rises toward the house, and a swing gate would hit the ground or fail to clear snow banks through the winter.
What it costs in Wrightwood
Sliding gate installs sit at the higher end of our installation range due to the track, roller hardware, and extra fabrication they require.
How we do it
We pour a level track bed, mount the roller hardware, hang the sliding leaf, and test the travel repeatedly to confirm it operates through its full range without binding.
What Gate Installation Costs in Wrightwood
| Item | Typical range in Wrightwood |
|---|---|
| Gate installation (base) | $850 – $2,400 |
| Automatic gate installation | $1,500 – $4,000 |
| Driveway gate installation | $850 – $2,400 |
Prices in Wrightwood run toward the upper end when the job involves steep grades, deep snow clearance requirements, or drilling footings into rocky soil. Every quote is fixed and agreed before work begins.
How long does gate installation take in Wrightwood?
Most Wrightwood driveway gate installs take one to two days once materials are on hand: day one for footings and posts, day two for the leaf, operator, and programming. Weather can add days in winter, and we schedule around snow forecasts rather than fighting them.
Do you handle the power run for an automated gate in Wrightwood?
Yes. We run the electrical from your panel to the operator location, install the control board, and program the system. We also handle low-voltage loops, keypads, and safety sensors so the entire system is wired correctly from day one.
Brands We Service in Wrightwood
We work on Viking, Ghost Controls, DoorKing, and Elite operators in Wrightwood, alongside most other major brands. Because we’re a gate-only shop, our techs know the common failure points on each brand before they open the cover, which cuts diagnostic time and avoids swapping parts that don’t need replacing. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Wrightwood, CA
| Service | Typical range in Wrightwood |
|---|---|
| Gate installation (base) | $850 – $2,400 |
| Automatic gate installation | $1,500 – $4,000 |
| Driveway gate installation | $850 – $2,400 |
| Sliding gate installation | $1,200 – $3,500 |
| Electric gate installation | $1,800 – $5,500 |
| Gate opener repair | $180 – $500 |
| Gate opener replacement | $450 – $1,400 |
| Gate sensor repair | $150 – $400 |
| Gate track repair | $200 – $650 |
| Gate hinge repair or replacement | $150 – $450 |
In Wrightwood, prices climb when we’re drilling into rocky mountain soil, extending a power run across a long driveway, or re-setting posts that frost heaved out of plumb. Whatever the number, we quote it upfront and it doesn’t change unless you approve a change order first.
Neighborhoods We Serve in Wrightwood
Our Wrightwood service area covers the full 92397 zip, from the village center up through the canyon roads and out to the more remote mountain lots. We work on gated entries along Highway 2, the cabin clusters off Lone Pine Canyon Road, and the newer custom builds on the upper slopes.
- Wrightwood village center
- Lone Pine Canyon
- Swarthout Canyon
- Heath Creek area
- Sheep Creek area
In good weather, we can typically reach any Wrightwood address the same day we take the call. During or immediately after a big snow, response runs longer because the roads themselves are the constraint, not our schedule. Call and we’ll give you a straight answer on timing.
Service Area – Cities Near Wrightwood
Many of our Wrightwood customers also own property or have family in the surrounding high desert and foothill communities. We provide the same gate-only service down in Piñon Hills, CA, Phelan, CA, Oak Hills, CA, and San Antonio Heights, CA. The terrain changes once you drop off the mountain, but the gate hardware and the operator electronics face the same basic failure modes, and we handle all of it.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Wrightwood
In clear weather we can usually reach a Wrightwood address the same day you call. During heavy snow or immediately after a storm, response depends on road conditions on Highway 2 and the canyon routes. Call (855) 707-3634 and we’ll tell you exactly when we can be there.
Some Wrightwood gate installations require county permits, particularly when the gate sits near a public road or involves new electrical work. We’re familiar with San Bernardino County’s requirements for the area and can tell you during the estimate whether your project will need one.
Yes. We schedule concrete work for clear-weather windows and plan installs so the gate, operator, and wiring all go in before the ground freezes solid. If you’re trying to beat the snow, call early in the fall when the schedule is most open.
If your Wrightwood gate is damaged, sagging, or not responding to the opener, call (855) 707-3634. We’ll come out, diagnose it on-site, and give you a fixed price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wrightwood Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Allen Nguyen"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Beatriz Salazar"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Alma Garcia