Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Phelan, CA
Gate installation in Phelan means building for wind, sand, and livestock – not for curb appeal. Most properties here are multi-acre ranches with long dirt driveways, horse pens, and corrals, so the gates we install have to hold square in sustained high-desert wind and keep working after every Santa Ana event. Ontario Gate Company has served Phelan since 2011, and we specialize exclusively in gates. If you need a new driveway gate, an automatic opener, or a full electric system for a ranch entrance, call us at (855) 707-3634 for a free estimate.
Why Phelan Homes Are Different
Phelan sits on the southern edge of the Mojave at roughly 4,000 feet, which means the gate on a Phelan property deals with conditions a San Bernardino or Rancho Cucamonga gate never sees. Strong sustained winds blow sand and grit into hinges, rollers, and opener tracks all year. Summer sun bakes paint and warps unbraced steel. Winter brings freezing nights and occasional snow that seizes cheap operators and snaps brittle plastic limit switches.
The housing stock shapes the work too. Most homes in the 92329 and 92371 ZIP codes are rural single-family places on one to five acre parcels – older ranch houses, manufactured homes, and newer custom builds. Almost every one has a long unpaved driveway and perimeter fencing for horses or other livestock. That means most gate installs here are heavy tube-steel ranch gates, not lightweight decorative aluminum. The gate is often the only controlled access point to the animals, so when it fails, the property owner cannot leave it open. We build with that reality in mind: heavier posts, deeper footings, and hardware rated for continuous wind load.
Styles & brands we work with
Our Main Phelan Services
Two calls dominate our Phelan work: mechanical gate repair and electric gate repair. Here is what each involves locally.
Gate Repair in Phelan
Most Phelan gate repair calls start with a gate that drags on the ground, will not latch, or has blown off its hinges entirely after a wind event. We see sagging swing gates on long ranch entrances, bent or twisted frames, and post bases that have loosened in sandy soil. One call we get repeatedly after spring winds: a gate blown past its stops and out of square. This is also where wind-torqued hinges and stripped hardware show up fastest. See the full scope at Gate Repair in Phelan.
Electric Gate Repair in Phelan
Electric gate problems in Phelan are usually dust and temperature related. Sand gets into operator arms and track rollers, UV degrades wiring insulation, and winter freezes cause false obstruction readings on photo eyes. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so when your opener quits, we diagnose it on-site instead of swapping parts on a guess. Full details: Electric Gate Repair in Phelan.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Phelan
Gate installation in Phelan starts with a simple question: what is this gate actually holding? Most of the time it is horses, sometimes cattle or goats, and occasionally just a long driveway that needs controlled access. That answer determines post depth, frame gauge, hinge weight, and opener type. Phelan’s wind and sand mean we overbuild everything: thicker wall tubing, heavier hinges, deeper concrete footings set below frost line, and operators sized for continuous duty rather than occasional use. A Phelan gate is not a decorative feature – it is a working piece of ranch infrastructure, and we build it that way. Our full Gate Installation process applies here, adapted for high-desert conditions.
Automatic Gate Installation
Signs you need it
You are getting out of the truck twice a day in dust and wind to open and close a heavy ranch gate by hand.
What it costs in Phelan
Automatic gate installation in Phelan typically runs $2,500 to $8,500 depending on gate size, operator type, and whether trenching for power is needed.
How we do it
We set the posts and hang the gate first, then mount the operator, run power and control wiring, install safety edges and photo eyes, and program travel limits and remotes.
Driveway Gate Installation
Signs you need it
Your driveway entrance is unsecured or the existing gate is too light for the wind load and has to be replaced rather than repaired.
What it costs in Phelan
A new driveway gate in Phelan typically falls between $1,800 and $6,500 installed, with heavy steel ranch gates on the higher end.
How we do it
We measure the opening, spec the gate for the site’s wind exposure and soil, set posts in concrete, hang the gate, and align the latch and stops so it closes true.
What Gate Installation Costs in Phelan
| Item | Typical range in Phelan |
|---|---|
| Basic single swing gate, manual | $1,800 – $3,500 |
| Heavy ranch or corral gate, manual | $3,000 – $6,500 |
| Automatic opener added to new gate | $2,500 – $4,500 |
Prices are quoted and agreed before any work starts. No surprises on the invoice.
How long does a gate installation take in Phelan?
Most residential gate installations take one to two days on-site, plus a few days for concrete to cure before the opener is fully programmed and tested. Larger custom ranch gates or new power runs can extend the schedule.
Can you install a gate on a long dirt driveway in Phelan?
Yes, and that is most of what we do here. We account for sand, wind, and soft soil in the post design, and we can place operators and safety edges to work reliably on unpaved surfaces. Call (855) 707-3634 for an exact site quote.
Brands We Service in Phelan
We stock parts and service operators from Viking, Ghost Controls, DoorKing, and Elite, among others. Because we specialize in gates only, our technicians arrive knowing the common failure points of each manufacturer’s systems, which means faster diagnosis and fewer parts swaps. See our brands for the full list we work on daily.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Phelan, CA
| Service | Typical range in Phelan |
|---|---|
| Gate repair service call and diagnosis | $85 – $150 |
| Hinge replacement (heavy gate) | $180 – $450 |
| Post reset in concrete | $350 – $800 |
| Electric opener motor replacement | $450 – $1,200 |
| Control board replacement | $300 – $750 |
| Loop detector replacement | $250 – $500 |
| Photo eye or safety edge replacement | $180 – $400 |
| Manual gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,500 – $8,500 |
In Phelan, prices move up when a gate is oversized for the wind load, when posts have to be dug through hard desert soil or replaced entirely, or when long power runs are needed from the house to the gate. Whatever the number is, you will hear it before we start work and it will not change unless the scope changes with your sign-off.
Neighborhoods We Serve in Phelan
We work throughout Phelan and the surrounding high-desert parcels, from the residential streets near Phelan Road to the larger ranch properties off Sheep Creek Road, Beekley Road, and Duncan Road. Most of our Phelan calls are within a 45-minute drive from our Ontario shop, which means a same-day visit is usually possible for emergency gate failures.
- Sheep Creek Road area
- Phelan Road corridor
- Beekley Road ranch parcels
- Duncan Road area
- East Phelan near Route 138
Service Area – Cities Near Phelan
From Phelan we also cover the neighboring High Desert communities along the 138 corridor and the I-15 side of the pass. We regularly run calls to Piñon Hills, CA and Wrightwood, CA, plus the larger Victor Valley stops in Oak Hills, CA and Hesperia, CA. Same-day response is available across this whole area.
Serving Phelan, CA — Our Local Coverage Area
We’re based in the Phelan area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Phelan
For emergency gate failures, most Phelan calls are scheduled the same day. The drive from our Ontario shop takes about 45 minutes depending on traffic through the pass, and we dispatch Phelan jobs in clusters so a down gate is not left open overnight. Call (855) 707-3634 to confirm today’s availability.
Most rural Phelan gate installations do not require a building permit, but automatic gates with vehicle detection loops or access control sometimes trigger electrical or planning review depending on the parcel. We handle the site evaluation and tell you exactly what is needed before any work starts.
Yes. Many Phelan properties have a main driveway gate plus a separate corral or pasture gate. We service and install all of them in one visit, which saves on trip fees and keeps the entire perimeter working under one maintenance plan.
If your gate is down, sagging, or needs to be replaced, call Ontario Gate Company at (855) 707-3634 for a free estimate. We quote the price before any work begins, and we are a gate specialist – not a fence company, not a handyman. Just gates, done right in Phelan.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Phelan Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez