Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Highland, CA | Ontario Gate Company
We provide independent Ghost Controls gate repair across Highland, CA, with service that accounts for what the Cajon Pass wind funnel does to swing arms, post anchors, and low-voltage electronics up here. The one thing that separates our Ghost Controls work in Highland from a generic repair call is that we start every diagnosis with the conditions your operator actually lives in: grit, wind-load, and heat. We’re not a Ghost Controls dealer and we’re not manufacturer-affiliated. We’re gate specialists who work on these units weekly. Call (855) 707-3634 for service in the 92346 area.
Why Highland Residents Choose Us for Ghost Controls Service
Most gate problems follow a pattern once you’ve seen enough of them. Ghost Controls operators have their own set of failure modes, and they show up differently in Highland than they do in, say, a coastal city with salt air and fog. We’ve opened enough of these low-voltage units to know what a dust-choked pivot feels like before the cover comes off. Noel Carrasco, our owner, grew up around the Cucamonga-Guasti area and has spent more than two decades on Inland Empire driveways. He built Ontario Gate Company around a simple rule: know what you’re looking at before you touch it.
We carry genuine Ghost Controls boards and arms for when a replacement is actually required. We also stock sealed and shielded roller hardware, heavier hinge sets, and battery components suited to Highland’s dust and wind. Our Ghost Controls sales & service work covers everything from a dead keypad to a full operator swap, and we service all of Highland service area zip code 92346. Because we work exclusively on gates, every diagnostic tool and every stocked part on the truck is there for one trade only.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Highland
- Wind-racked gate leaves throwing the arm out of stroke. Santa Ana winds through the Cajon Pass put lateral force on gate panels. A lighter tube-steel gate bent by wind no longer travels the path the Ghost Controls arm expects, so the operator reverses or faults. We straighten or reinforce the leaf, then re-tune the limits.
- Grit-packed swing-arm pivots and rollers. On Highland’s east-side semi-rural lots with long dirt or gravel driveways, wind-blown sand works into pivot points and roller bearings. The swing binds, the motor strains, and the board eventually faults. We clean, replace with shielded hardware, and re-set the travel.
- Battery and solar-charge failure after heat and dust. Ghost Controls operators run on 12V battery systems, often paired with solar panels. Heat shortens battery life; dust on solar panels cuts charge voltage. A dead gate that worked yesterday is usually a battery or charge issue, not a motor failure.
- Post anchors loosened by repeated wind loading. The repeated push-pull of Santa Ana events works post anchors loose in Highland soil. Once the post moves, the Ghost Controls arm geometry shifts and the operator fights itself. We re-set and re-concrete the post, then re-tune everything.
- Limit and reversal faults from misalignment, not bad boards. We see this constantly: a homeowner assumes the control board failed, but the gate leaf got racked out of alignment and the operator’s safety logic is doing its job. We diagnose on-site before recommending any parts.
Ghost Controls Service in Highland: What Local Conditions Mean for Your Equipment
Highland sits at the foot of the San Bernardino Mountains, right where the Santa Ana winds funnel through the Cajon Pass corridor. If you need San Bernardino Ghost Controls service, the same wind and dust conditions apply. That geography does two things to Ghost Controls operators that simply don’t happen in most neighboring cities. First, wind-load is a year-round structural concern: gates here take repeated lateral hits that loosen post anchors and bend lighter leaves, which changes the swing path the operator was tuned to follow. Second, the east side of Highland has a concentration of semi-rural parcels with long dirt and gravel driveways. Wind-blown sand off the foothills grinds sliding-gate rollers and swing-arm pivot points far faster than on paved suburban tracts. On a recent call off the east side, a homeowner’s Ghost Controls heavy-duty single swing started reversing halfway and then quit during a Santa Ana wind week. Our tech found sand-packed pivot points and a worked-loose post anchor. We re-set and re-concreted the post, swapped in shielded roller hardware, and re-tuned the limits. The operator itself was fine and stayed in service. That’s the Highland repair pattern: the motor’s usually innocent. The environment did the damage.
Ghost Controls Models & Products We Service in Highland
We service the full Ghost Controls line you’re likely to find on Highland driveways: the Heavy-Duty Single Swing (TDS series) DIY kits, Dual Swing (TSS series) kits with battery backup, solar-charged swing operator packages, and the keypad and remote accessory add-ons. When a board or arm genuinely needs replacing, we use genuine Ghost Controls parts. When the issue is hardware, we don’t just drop in the same part that failed. We move to shielded or sealed roller hardware and heavier hinge sets that survive grit and wind cycles longer. Highland gets hotter, dustier summers and bigger wind events than most Inland Empire cities, and the hardware spec should match. We stock common Ghost Controls boards, arms, batteries, and solar charge components locally so most Highland jobs don’t wait on a parts shipment. We also carry inventory for Redlands Ghost Controls service calls.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Highland
What you’ll pay depends on what the diagnosis actually finds. A post reset or limit re-tune runs less than a board replacement. A battery swap sits in the middle. A full arm or board replacement with genuine Ghost Controls parts costs more, and we’ll show you the price before any work begins. Here’s the range we typically see in Highland:
| Service | Typical Range |
|---|---|
| Diagnostic service call | $75 – $140 |
| Travel / trip charge | $40 – $70 |
| Labor (per hour) | $95 – $150 |
| Ghost Controls control board replacement | $250 – $550 |
| Swing arm / actuator replacement | $200 – $450 |
| Battery replacement | $80 – $200 |
| Post reset & re-concrete | $180 – $400 |
| Full operator swap (parts + labor) | $600 – $1,100 |
The price is quoted and agreed before any work starts. We don’t hand you an invoice that surprises you. Call (855) 707-3634 for a free estimate on your Ghost Controls repair in Highland.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Highland
Usually not. What you’re describing is typically a gate leaf that the wind has flexed or racked out of alignment, which trips the operator’s limit or reversal safety. The motor stalls because it’s fighting a swing path it wasn’t tuned for. We check alignment, post anchors, and pivot hardware before we ever condemn a motor. Call (855) 707-3634 and we’ll diagnose it on-site.
Because wind-blown sand and grit from the foothills work into roller bearings and swing-arm pivot points, grinding them down far faster than on paved suburban streets. The fix isn’t more frequent greasing. It’s switching to sealed or shielded roller hardware and keeping the arm pivot clean. That’s a spec change we make routinely on Highland’s east-side properties.
Yes. Ghost Controls swing operators have a manual release that lets you disengage the arm and swing the gate by hand. If the release is jammed or the gate itself is off its hinges, that’s a separate problem we’ll address during the service call. The release is designed to work, but on gates that haven’t been moved manually in years, we sometimes need to free it up first.
We work on the entire low-voltage system: the motor, the control board, the battery, the solar panel, and the charge circuit. Solar and battery issues are actually the most common off-hours “dead gate” complaints we get on Ghost Controls units in Highland, because heat shortens battery life and dust cuts solar output. We diagnose the whole system, not just the arm.
No. We’re an independent gate company, not a Ghost Controls authorized dealer or warranty service center. We can tell you if your unit is likely still within the manufacturer’s warranty window based on its age and model, and we’ll advise you on how to pursue that. But our work is billed as independent service. Call (855) 707-3634 and we’ll give you an honest read on what’s covered and what isn’t.
Service Areas Near Highland
We serve Highland and the surrounding foothill communities. If your Ghost Controls gate is in Rancho Cucamonga, San Antonio Heights, or Claremont, we work there too. We also cover Ghost Controls service in Mead Valley and Ghost Controls service in Garden Grove for customers who need us farther out.
Book Your Ghost Controls Service in Highland Today
If your Ghost Controls gate is down or acting up in Highland, call (855) 707-3634. We’ll get a tech out, diagnose the actual problem, and quote the repair before any work begins. Free estimates, no obligation.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Highland and the Inland Empire with gate-specific service.