Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland, CA
Gate installation in Highland means building for wind, grit, and long driveway runs, not just hanging a panel and wiring a motor. Most of the gates we install across the 92346 zip code are wide driveway systems on semi-rural east-side lots or newer foothill subdivisions, where Santa Ana gusts through the Cajon Pass routinely test posts, hinges, and slide tracks. Ontario Gate Company has served Highland since 2011, and we approach every install with that specific wind-load and dust exposure in mind. Call (855) 707-3634 for a free measure and a written quote before any work begins.
Why Highland Homes Are Different
Highland sits at the base of the San Bernardino Mountains, directly in the path of Santa Ana winds that funnel through the Cajon Pass corridor. That geography rewrites the rulebook for gate work. Posts that hold fine in Redlands or Loma Linda loosen here within a few seasons if they’re not set deep enough or reinforced for lateral load. We see bent gate leaves, stretched hinges, and slide rollers that have been ground down by wind-blown sand and grit on the east side, where long dirt and gravel driveways kick up fine dust every time the wind picks up.
The housing stock adds another layer. Older mid-century tract homes and ranch-style properties near the foothills often have narrow driveway openings with aging steel tube gates. Newer planned subdivisions lean toward decorative aluminum or wrought-iron look systems with electric operators. And the semi-rural parcels, particularly east of Victoria Avenue and up toward the foothill edges, frequently have custom-welded steel or iron gates on long runs. Those jobs are not pull-from-stock installations. They need on-site fabrication, heavier posts, and hardware spec’d for grit and wind, not the salt and humidity concerns you’d find closer to the coast. Winter rain in the foothills swells wood gates, and hot dry summers bake untreated steel until the finish fails and rust takes over. Every install we quote in Highland accounts for those conditions up front.
Styles & brands we work with
Our Main Highland Services
Most calls we take from Highland fall into two buckets: a gate that has physically failed and a gate whose electric operator has stopped responding. Both are covered below.
Gate Repair in Highland
Highland gate failures are usually mechanical. Wind has bent the leaf, hinges have stretched, a post has leaned, or grit has chewed through slide rollers and track wheels. On semi-rural lots, the slide hardware wears faster than on paved suburban streets, so we routinely replace rollers with sealed or shielded units and reset posts deeper than the original install. We diagnose on-site, show you exactly what failed, and quote the repair before we touch a tool. Ontario Gate Company has served Highland since 2011. For sagging, binding, or wind-damaged gates, see Gate Repair in Highland.
Electric Gate Repair in Highland
When a Highland gate stops opening, the problem is often electrical: a dead control board, a failed loop detector, a misaligned safety sensor, or a motor that has overheated in the summer sun. We carry control boards, safety edges, photo eyes, and operator parts for the brands most common in Highland, so many electric repairs are completed on the first visit. Wind-driven dust also gets into limit switches and gear housings, which causes intermittent failures that look like ghosts. If your operator is dead or erratic, read more at Electric Gate Repair in Highland.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland
Gate installation in Highland usually means one of two jobs: replacing an aging manual gate on an older foothill ranch property, or installing a new electric gate on a newer subdivision lot or semi-rural parcel with a long driveway. The single biggest variable here is wind. A gate that looks fine in a showroom will twist and sag within two seasons if the posts are undersized or the leaf is too light for the gusts that come down the pass. We quote Highland installs around heavier-post anchoring, welded or reinforced leaves, and hardware that holds alignment under repeated lateral stress. We also handle the full electric package: operator, safety edges, loop detectors, and access control, all as part of the same install. For details on the full scope, see Gate Installation.
Automatic Gate Installation
Signs you need it
You have a manual gate on a long or busy driveway and you’re tired of getting out of the car every time you come home.
What it costs in Highland
A complete automatic gate installation in Highland typically runs $4,500 to $9,800 installed, depending on gate width, leaf weight, and operator type.
How we do it
We measure the opening, spec the appropriate operator for the gate’s weight and duty cycle, mount the motor and arm, set the open and close limits, install photo eyes and safety edges, and wire and test the full system before we leave.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is bent, rusted through, or too narrow for current vehicles, or you have no gate and want a real security barrier across the drive.
What it costs in Highland
Driveway gate installation in Highland generally runs $3,200 to $8,500 for the gate and posts, with higher figures for long custom-welded steel runs on semi-rural lots.
How we do it
We check the driveway width and slope, set posts below grade at the depth the wind conditions demand, hang the leaf, and align hinges and latch so the gate swings clean without dragging.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your property line sits tight to the road, so a swing gate would hit the grade or block the approach.
What it costs in Highland
Sliding gate installation in Highland typically falls between $4,000 and $10,500 installed, with heavier cantilever or track systems on the upper end for wide, long, or wind-exposed runs.
How we do it
We set a level track or cantilever base, install the rolling gate leaf, align the guide rollers, and then fit the motor, rack, and travel limits so the gate moves smoothly without grinding through Highland’s wind-blown grit.
What Gate Installation Costs in Highland
| Item | Typical range in Highland |
|---|---|
| Automatic gate installation | $4,500 – $9,800 |
| Driveway gate installation | $3,200 – $8,500 |
| Sliding gate installation | $4,000 – $10,500 |
How long does gate installation take in Highland?
Most Highland gate installations run one to two days from post-setting to final wiring and testing. Custom-welded steel gates on semi-rural lots can add a fabrication lead time of one to three weeks before the install day. We confirm a schedule in writing before any work starts.
Do you handle the full electric package with a new gate in Highland?
Yes. We install the operator, safety photo eyes, safety edges, loop detectors, and any keypad or intercom access you want as part of the same job. You get one crew, one quote, and one warranty conversation, not a gate contractor and a separate electrician pointing at each other.
Brands We Service in Highland
We work on the operator brands most common on Highland driveways, including Viking, Ghost Controls, DoorKing, and Elite. Because we stock parts for these systems on our trucks, many Highland repairs do not wait on a parts order. For the full list of operators we service, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland, CA
| Service | Typical range in Highland |
|---|---|
| Gate repair | $250 – $1,500 |
| Electric gate repair | $300 – $1,800 |
| Automatic gate installation | $4,500 – $9,800 |
| Driveway gate installation | $3,200 – $8,500 |
| Sliding gate installation | $4,000 – $10,500 |
| Electric gate installation | $4,500 – $9,800 |
| Gate installation services | $3,200 – $9,800 |
Prices in Highland push toward the upper end of these ranges when the gate sits on an exposed east-side lot with long gravel driveways, because those jobs need deeper post setting, sealed rollers, and sometimes on-site welding to handle wind and grit. Whatever the quote, the price is agreed before any work starts, and it does not change unless you approve a change first.
Neighborhoods We Serve in Highland
We cover all of Highland, including the older ranch-style streets near the foothills, the planned subdivisions around the 210 corridor, and the semi-rural east-side lots where driveways run long and gates take a beating from pass winds. Our typical response window for most Highland repair calls is same-day or next-day.
- East Highlands
- Base Line corridor
- Victoria Avenue area
- Greenspot Road foothill parcels
- Highland Grove subdivisions
Service Area – Cities Near Highland
Ontario Gate Company serves Highland and the surrounding Inland Empire cities with the same gate-only specialization on every call. If your property is just over the line, we also cover San Bernardino, CA, Muscoy, CA, Redlands, CA, and Loma Linda, CA.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland
Most Highland repair calls are answered same-day or next-day. Wind-damaged gates and dead electric operators are our highest priority, since a gate stuck open or closed is a security problem. Call (855) 707-3634 and we will give you a straight arrival window.
Permit requirements depend on the property and the scope. Some Highland HOAs have height and material rules, and certain automated gate installs need an electrical permit. We can walk you through what your specific property needs before the quote is finalized, but we do not handle the permit filings ourselves.
We specialize exclusively in gates. That means repair, electric gate repair, and installation. We are not a fence company that occasionally hangs a gate, and we don’t do general contracting. Every tech, tool, and part on our trucks is gate-specific, which is why diagnosis and repairs go faster.
If you need gate installation in Highland, call Ontario Gate Company at (855) 707-3634 for a free estimate and a straight answer about what the job will cost. We specialize exclusively in gates, and we’ve served Highland since 2011.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Yusuf Aziz"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen