Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pedley
Electric gate repair in Pedley usually means one of two things: a solar operator that quit after a dust storm, or a heavy swing gate that’s sagged enough to burn out its gearbox. Most jobs we see here run $180 to $650 depending on whether we’re replacing a battery, a control board, or a full operator. We work the Jurupa Valley edge from Van Buren down to Limonite, and we know what these gates go through out here. Call (855) 707-3634 for a free estimate, and we’ll get someone out to your property fast.
Pedley isn’t a tract-home town. The gates we service sit at the end of long gravel driveways, stretched across ranch entrances, or guarding horse properties where a gate that won’t open means you can’t get a truck in or out. That’s the work we specialize in. When you call, you get a technician who understands solar charge controllers, heavy-duty swing operators, and what Santa Ana dust does to a gear rack. Not a general handyman who’s going to Google your operator model on the driveway.
Why Ontario Gate Company Is Pedley’s Preferred Electric Gate Repair Company
We work on gates every day. That’s the whole job. No fencing side work, no garage doors, no general contracting. Every diagnostic tool on our truck, every part on our shelf, and every hour of our training is gate-specific. For Pedley property owners, that means when we show up for a Electric Gate Repair call, we’re not learning your system on arrival. We’re checking the failure points we already know exist on your brand of operator.
Noel Carrasco runs our service crew, and he’s built the company around one principle: diagnose on-site, explain the problem in plain English, and fix it so it stays fixed. Pedley homeowners and property managers call us back because we don’t do part-swap guesswork. We test the motor, the control board, the safety sensors, and the power source before we touch anything. That cuts diagnostic time and keeps your gate down for hours instead of days.
We stock parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Pedley’s solar-heavy installations, we keep charge controllers and batteries on the truck because we know they’re the first thing to fail after a wind event. Response time to Pedley is typically same-day or next-morning for non-emergency calls, and we prioritize gate-down situations because we understand a driveway you can’t enter isn’t an inconvenience out here. It’s a stranded household.
Styles & brands we work with
Gate Opener Repair in Pedley
Gate Opener Repair in Pedley is the most common call we handle, and it usually traces back to three things: a drained solar battery, a dust-packed operator box, or a gearbox that’s been straining against a sagging gate for months. We diagnose the full power chain, from the panel or AC feed to the motor output, before recommending a repair. A battery replacement in Pedley typically runs $180 to $280. A control board replacement runs $300 to $550. A full operator swap, when the motor or gearbox is beyond saving, runs $650 to $1,400 depending on the size and drive type.
Solar Opener Systems
Most Pedley properties with long driveway runs and no grid power near the gate rely on solar operators. These systems are dependable until fine Inland Empire dust coats the panel and works its way into the charge controller housing. After a Santa Ana event, we find panels caked with a layer fine enough to cut charging capacity by half or more. We clean the panel, test the battery under load, reseal the operator box, and replace the charge controller if it’s been cooked.
Swing and Slide Operator Strain
When a gate sags, the operator works against gravity on every cycle. Swing gates put torsion on the hinge post and lateral load on the operator arm. Slide gates drag on the track and grind the rack and pinion. On Pedley horse properties, we regularly find operators that have been fighting a sagging gate for a year or more. The repair isn’t just the motor. It’s the hinge-post correction, the wheel adjustment, or the track alignment that lets a new operator survive.
Automatic Gate Repair in Pedley
Automatic Gate Repair in Pedley covers the full system, not just the motor: the opener, the control board, the safety sensors, the keypad, the remote receivers, and the wiring between them. When a Pedley gate stops responding to a remote or keypad, the problem is rarely the remote itself. It’s usually a failed control board, a tripped safety edge, or a short in the low-voltage line running from the house or solar array. We trace the entire system on-site and tell you exactly what failed and what it’ll take to restore full function.
Control Boards and Safety Sensors
Control boards fail in Pedley more often than they do closer to the coast. The heat, the dust, and the wide temperature swings between day and night stress capacitors and solder joints. We replace boards from DoorKing, Elite, Viking, and Ghost Controls, and we reflash settings so your remotes and keypad still work after the swap. Safety sensors get knocked out of alignment by wind, hit by livestock, or simply coated with dust. We clean, realign, and retest entrapment protection on every automatic gate repair.
Access Control and Keypads
Most Pedley ranch gates have a keypad, a remote setup, or both. When the keypad stops accepting codes after rain or a heat wave, it’s often corrosion on the terminals or a failed membrane. We service and replace keypads and remote receivers, and we program them on the spot. You get working access control before we leave the property, not a promise to come back with a part.
Trusted Brands We Service in Pedley
We’re factory-trained on nine gate and operator brands, and the three that show up most often on Pedley properties are Viking, Ghost Controls, and DoorKing. Viking operators are common on the heavy swing gates at ranch entrances. Ghost Controls shows up on solar installations where low power draw matters. DoorKing is the standard for slide gates on commercial and agricultural access points. Because we carry brand-specific parts for these systems, we don’t have to order a board and make you wait a week. We stock local parts for Pedley customers, and we know the failure patterns of each manufacturer’s equipment.
Common Electric Gate Repair Problems We See in Pedley Homes
- Dust-packed solar operators. Santa Ana winds drive fine sand into every seam of an operator box. We find charge controllers buried in it and panels that test at half output. The fix is a full clean, reseal, and battery load test.
- Hinge-post sag on wide swing gates. A 14 to 16-foot gate on a Pedley horse property weighs hundreds of pounds. The hinge post leans, the gate drags, and the operator gearbox takes the abuse until it strips. We correct the post and replace the gearbox together.
- Rack and pinion failures on slide gates. Gravel driveways mean grit. Grit in the track means the slide gate drags, the drive wheels chew through the rack, and the motor’s amperage spike kills the board. We clean and align the track, then replace the damaged drive components.
- Dead batteries from low winter sun. In summer, Pedley solar panels charge fast. In short winter days with dust or overcast skies, batteries drain and never fully recover. We size replacement batteries for the gate’s actual cycle count and the panel’s real output, not what the manual says.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Pedley, CA
Here are the numbers Pedley homeowners actually ask about. Battery replacement on a solar operator: $180 to $280. Safety sensor or photo-eye replacement: $150 to $250 per pair. Control board replacement: $300 to $550. Keypad or remote receiver replacement: $120 to $300 installed. Full operator replacement on a residential swing or slide gate: $650 to $1,400. Full replacement on a heavy agricultural gate with a 20-foot span: $1,400 to $2,500. What moves the price within those ranges is the gate’s weight, the operator’s drive type, and whether the gate itself needs a sag correction or track realignment to stop killing the operator. Every job is quoted and agreed in writing before any work starts. You get the number up front, and you approve it before we turn a wrench. Call (855) 707-3634 for a free estimate at your Pedley property.
We Also Serve Cities Near Pedley
Ontario Gate Company provides Electric Gate Repair in Pedley and the surrounding Jurupa Valley communities. We run service to Glen Avon, Sunnyslope, Rubidoux, and Riverside. If your property sits on the edge of Pedley and you’re not sure whether you’re in our service area, call (855) 707-3634 and we’ll tell you straight.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pedley
Santa Ana winds coat solar panels with fine dust and blow sand directly into the operator box. The dust cuts panel output enough that the battery stops charging, and the sand packs around the charge controller and terminal connections. We clean and reseal the operator, test the battery, and get the system charging again. Call (855) 707-3634 and we’ll come out and fix it, usually the same day.
Yes, almost always. The operator is usually fine once the gate’s geometry is corrected. We straighten or rebuild the hinge post, correct the sag, and then assess whether the gearbox took permanent damage from the strain. In most Pedley cases, we repair the gate alignment and replace only the damaged operator components, not the whole gate or the whole system.
Your gate needs working safety sensors, commonly photo eyes across the opening, plus a reversing edge or other entrapment protection that meets UL 325 requirements. We test every sensor and safety device on every automatic gate repair in Pedley. If something’s missing or failed, we replace it before we call the job done. It’s not optional, and we don’t skip it.
Yes. Those are the majority of our Pedley service calls. Long gravel driveways mean gates set back 100 feet or more from the road, often running on solar because there’s no grid power at the gate, and often spanning 14 to 20 feet across a ranch entrance. We handle the heavy operators, the solar systems, the hinge-post corrections, and the slide tracks on these properties every week.
Solar is the standard fix for Pedley gates with no AC feed nearby. We size a panel and battery bank that matches your gate’s real daily cycle count, then install a low-power operator that doesn’t drain the system. If you’re tired of dead batteries after every dust storm, we can upgrade the charge controller and reseal the operator box so fine dust stays out. Call (855) 707-3634 for specifics on your gate.
Get Your Pedley Gate Back in Operation
A gate that won’t open isn’t a small problem when it’s the only way onto your property. If your automatic gate is down, stuck open, or running rough, call (855) 707-3634 now. We’ll schedule a service call to your Pedley address, diagnose the system on-site, and give you a written quote before any work starts. Estimates are free, and we won’t start a repair until you approve the price.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Pedley and the Jurupa Valley with gate-specific repair, electric gate repair, and installation services.