Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Upland
If your automatic gate is stuck, sagging, or not responding in Upland, you need a technician who understands the specific problems this city’s foothills create. Ontario Gate Company specializes exclusively in gates. No fencing, no general contracting, no garage doors. We diagnose on-site and get your gate back in operation. For a free estimate in Upland, call (855) 707-3634.
From the flatland tract homes in 91786 to the hillside lots above 91784, gate repair in Upland is not a one-size-fits-all job. The power source, the gate’s width and span, the age of the hinges, and what the Santa Ana winds have done to the posts all change the repair plan. We are trained on nine gate and operator brands, including Viking, Ghost Controls, DoorKing, and Elite, so when we arrive, we already know the common failure points of your equipment.
Why Ontario Gate Company Is Upland’s Preferred Gate Repair Company
Most companies that claim to fix gates in Upland are fence installers who also take gate calls. Ontario Gate Company is a gate-only specialist. Every technician, every stocked part, and every diagnostic tool we carry is built around one trade. That narrow focus means we arrive knowing what to look for, not learning on the job. It is the difference between a technician who replaces a part and one who fixes the problem the first time.
We service the full lifecycle of your gate in Upland: mechanical repair, electric gate repair, and new installation. That matters when a mid-century wrought-iron gate needs new hinges now and an automatic opener retrofit a year from now. The same company that diagnoses your Gate Repair issue is the one that will maintain the system years later. No finger-pointing between installers and repair crews.
Noel Carrasco and the Ontario Gate Company team have worked on gates throughout Upland, including the hillside communities near San Antonio Heights and the older ranch-home streets west of Euclid Avenue. We know which neighborhoods get hit hardest by Santa Ana wind loading and which ones mostly need sagging-hinge tune-ups. If your gate is down in Upland, call (855) 707-3634 and we will get someone out to diagnose it on-site.
Styles & brands we work with
Gate Welding in Upland
Gate Welding in Upland is not a rare specialty job. It is a routine part of keeping wide driveway gates and mid-century iron side gates standing straight and swinging true. On hillside lots along the base of the San Gabriels, welded gate frames crack under wind stress and years of thermal expansion from hot, dry summers. On flatland ranch homes, original wrought-iron gates rust through at the base rail where morning foothill damp gathers.
Upland gate welding typically runs $180 – $420 for a cracked joint or broken hinge barrel, and $350 – $900 when we are also cutting out rotted sections, fabricating new rails, and realigning the leaf. We quote the full price before any work starts. You will not get a surprise invoice after the weld cools.
Weld Repair on Wind-Facing Side Yards
On wind-facing side yards in the 91784 foothills, we regularly see hinge barrels sheared from their posts after a strong Santa Ana event. Welding the hinge back on is only half the fix. The post has usually shifted, so we set it on a deeper footing first, then weld, then check the gate’s travel and latch alignment.
Rust-Through on Original Iron Gates
Upland’s 1950s-1970s ranch homes still have original wrought-iron and steel gates, and the base rails are the first thing to rot out from ground contact and foothill damp. We cut out the rusted section, weld in new steel, and reinforce the lower corners so the gate does not sag again in six months.
Commercial Gate Repair in Upland
Commercial Gate Repair in Upland means dealing with slide gates and cantilever gates that weigh significantly more than a residential swing gate, and with operators that run more cycles per day. Property managers in Upland call us when a gate at an apartment complex off Foothill Boulevard or an industrial yard near the 10 freeway will not close, or when a safety loop detector fails and the gate will not open for inbound traffic.
Commercial gate repair in this city runs $250 – $1,500 depending on the operator type, gate size, and whether we are replacing a control board, a motor, or damaged track. For wide commercial slide gates, the bill can push higher when we are also rebuilding broken rollers or replacing a loop detector. Every price is quoted and agreed before we start.
Electric Operator and Loop Detector Repair
Most commercial gate failures in Upland are electrical, not mechanical. Control boards, loop detectors, safety photocells, and access-control integration are our core work. Brands we carry parts for include DoorKing, Elite, Viking, and Ghost Controls. That matters because a property manager cannot afford two days of downtime while someone chases a part.
Slide Gate Track and Roller Repair
Wide slide gates in commercial settings wear out rollers and chew up track, especially on Upland properties with uneven pavement or debris from wind. We diagnose on-site whether the track needs repair or replacement, and we do not upsell you a new gate when three hours of track work restores the gate to full function.
Trusted Brands We Service in Upland
Your Viking operator has a known list of failure points. So does your DoorKing swing-arm, your Ghost Controls residential opener, and your Elite commercial slide. Ontario Gate Company technicians are trained on nine gate and operator brands, including those four. When you tell us in Upland that your gate is dead or straining, we already know where to look. We stock common control boards, loop detectors, and safety sensors locally, which means fewer return visits and a faster path back to a working gate.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Upland Homes
- Solar opener battery banks drained after wind events. On long driveway gates set back from the street in 91784, a solar gate opener is often the only power option. When Santa Ana winds push the gate hard or the panel loses sun, the battery bank drains and the gate goes dead mid-travel.
- Hinge posts pulled loose in graded slope soil. We see this constantly on hillside lots. The post moves under wind load, the hinges shear, and the whole leaf sags rather than just the latch. Resetting the post on a deeper footing is the real fix.
- Warped wood and seized hinges on original ranch-home gates. Upland’s hot, dry summers warp wood gates, and winter rains swell them. Ground-level rust seizes the hinges, and a retrofitted automatic opener then labors against all of it.
- Safety sensor and entrapment protection failures on retrofitted gates. Mid-century gates in Upland were never designed for automatic openers. When we retrofit, we verify the safety photocells, edge sensors, and force settings meet current entrapment standards before handing over the keypad codes.
Pricing for Gate Repair in Upland, CA
A typical gate service call in Upland that ends with a hinge adjustment, latch repair, or track realignment runs $85 – $250. Electric gate repair, including control board replacement or loop detector work, usually lands between $200 – $700. Gate welding jobs, as covered above, run $180 – $900 depending on scope. A full operator replacement on a wide driveway gate in the foothills starts around $1,200 and can exceed $3,000 for a heavy-duty solar-powered system with a battery bank. We do not give vague estimates. We quote the job, you approve the price, and that is the number on the invoice. Call (855) 707-3634 for a free estimate in Upland.
We Also Serve Cities Near Upland
Ontario Gate Company is based nearby in Ontario and provides Gate Repair service throughout the Inland Empire foothills. That includes San Antonio Heights, Claremont, Montclair, and Rancho Cucamonga. If you are outside Upland proper but still need a gate specialist, call us and we will confirm coverage for your street or community.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Upland
Yes. A solar gate opener with a battery bank is the standard solution for long driveway gates in Upland’s 91784 foothill zone where running mains power is impractical or too costly. We size the panel and battery to your gate’s width, weight, and usage, then install the operator and verify the safety devices. Call (855) 707-3634 for a free site assessment.
Because the hinge post is the part carrying the entire weight of the gate leaf, and in Upland’s graded slope soil, that post slowly pulls loose under its own load plus wind loading. Once the post moves, the hinges shear or bend, and the whole leaf sags. The correct repair is resetting the hinge post on a deeper footing, not just shimming the hinges.
Yes. Any automatic gate opener installed or retrofitted in Upland must have working entrapment protection, which means safety photocells across the gate path, and depending on the system, contact edges or other monitored safety devices. When we install or repair a gate operator in Upland, we verify those devices trip cleanly before we consider the job done. This is a safety requirement, not an upsell.
We can. Upland has a large stock of 1950s-1970s ranch homes with original iron and wood gates, and most of what we do involves reviving those rather than replacing them. Welding, hinge replacement, post resetting, and wood gate realignment are all routine for us. We quote the repair against the cost of replacement and let you decide.
Because Santa Ana wind season starts in the fall, and those dry, gusty winds are the single biggest weather stressor on gates in Upland. Posts pull loose, hinges shear, and lightweight metal frames flex until a weld fails. Fall is also when the dry-wet swing starts, so rusted fasteners and seized hinges that held through summer begin to fail. Call (855) 707-3634 if your gate is groaning or misaligned this fall.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Upland and the Inland Empire foothills.