Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Gate installation in Fontana has to account for two things most other cities don’t deal with at the same time: homes built in completely different eras, and wind that comes screaming down the Cajon Pass. A 1950s chain-link driveway gate off Sierra Avenue needs a different approach than a 2000s HOA wrought-iron gate in a newer subdivision off Duncan Canyon. We install both, and everything between. Since 2011, Ontario Gate Company has served Fontana with gate-only crews who diagnose on-site and quote the job before any work starts. Call (855) 707-3634 for a free estimate.
Why Fontana Homes Are Different
Fontana’s housing stock splits into two distinct generations, and each one creates its own gate problems. The older single-story stucco tract homes built in the 1950s through the 1970s, concentrated in ZIP codes 92335 and 92337, still have original chain-link and wrought-iron driveway gates. Those gates have been through sixty or seventy summers of triple-digit heat followed by Santa Ana wind events, and the metal fatigue shows. Hinges sag, posts lean, and latches stop lining up. In the older neighborhoods off Foothill and Sierra, we also see gate posts shifting because of expansive clay soils that swell after winter rains and shrink again in summer, a condition that drags gates out of alignment and is less common in the sandier soils of nearby cities like Bloomington or Rialto.
Then there are the newer two-story developments, especially in ZIP 92336, where HOAs mandate specific gate styles: vinyl, wrought-iron, and automatic driveway gates that have to match the community’s architectural guidelines. Those gates face the same inland heat and wind, but they add a second layer of complexity because any replacement or repair has to keep the HOA happy. Fontana sits at the base of the Cajon Pass, which means gates get hit with gusty winds and windblown sand in a way Rancho Cucamonga gates simply don’t. That combination of heat, wind, and sand accelerates rust, hinge wear, and gate misalignment faster than homeowners expect.
Styles & brands we work with
Our Main Fontana Services
Fontana homeowners and property managers call Ontario Gate Company for two services more than anything else: repairing gates that have stopped working, and repairing the electric systems that operate them. Each one has its own page with full detail. Here’s what to know before you click through.
Gate Repair in Fontana
A dragging gate off Sierra Avenue or a sagging iron gate in a 1960s tract home is rarely a mystery. Posts shift in clay soil, hinges wear from decades of heat, and wind gusts from the Cajon Pass finish the job. Our gate-specific crews diagnose on-site, identify the exact failure point, and quote the repair before touching anything. The goal is your gate back in operation, not a series of return visits. Full details on pricing and the signs to watch for are on our dedicated Fontana page: Gate Repair in Fontana.
Electric Gate Repair in Fontana
Automatic gates in Fontana’s newer subdivisions run on control boards, safety sensors, loop detectors, and motors that take a beating from sustained heat and windblown sand. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the technician who arrives already knows your brand’s common failure points. Electric gate repair is a core competency here, not an add-on. If your opener hums but the gate won’t move, or the gate reverses for no reason, see Electric Gate Repair in Fontana for symptoms, costs, and what to expect on a service call.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fontana
Gate installation in Fontana means matching the right gate to both the house and the conditions it will live in. The dry Santa Ana winds off the Cajon Pass punish lightweight materials and poorly anchored posts. The older chain-link gates in neighborhoods near Sierra and Foothill have served their time, and many homeowners are replacing them with stronger welded steel or automatic gates built for decades of heat. Newer HOA communities in ZIP 92336 need installations that satisfy architectural review boards while still holding up to wind and sand. Whether you’re replacing a 1960s swing gate or putting in a sliding driveway gate for RV access, we handle the full Gate Installation from post-setting to final safety check, with the price agreed before work begins.
Automatic Gate Installation
Signs you need it
You’re opening and closing your gate by hand every day, or you have a new driveway layout that requires controlled access.
What it costs in Fontana
Automatic gate installation in Fontana typically falls in the $1,850 – $6,500 range depending on gate size, operator brand, and whether new wiring or a concrete pad is needed.
How we do it
We survey the driveway slope and swing clearance, set posts in concrete at the proper depth for local soil, mount the operator and control board, then run and test all safety sensors before programming remotes and keypads.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, dragging on the ground, or too narrow for the vehicles you actually own.
What it costs in Fontana
Driveway gate installation in Fontana usually runs $950 – $4,200 for a single swing gate, with the higher end covering solid welded steel or ornamental iron with an operator.
How we do it
We measure the driveway opening and slope, fabricate or order the gate to fit, anchor the posts below the frost and clay movement line, hang the gate, and adjust hinges so it swings clean through the full arc without sagging.
Sliding Gate Installation
Signs you need it
You have a narrow driveway or a steep slope where a swing gate won’t clear, or you need RV access without leaving room for a gate arc.
What it costs in Fontana
Sliding gate installation in Fontana starts around $2,200 and can reach $6,000 or more for heavy cantilever gates with automated operators.
How we do it
We pour a reinforced concrete track or set a cantilever frame, mount the gate on rollers, set the operator and rack, then adjust travel limits and safety edges so the gate stops and reverses correctly.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Driveway gate installation (single swing, no operator) | $950 – $4,200 |
| Automatic gate installation (complete system with operator) | $1,850 – $6,500 |
| Sliding gate installation (cantilever, no operator) | $2,200 – $6,000 |
Fontana pricing shifts with material weight (solid steel costs more than aluminum), operator brand, and whether the install requires new electrical runs or concrete work. Every quote is fixed before work starts, so there are no surprises on the invoice.
How long does gate installation take in Fontana?
Most Fontana gate installations finish in one to two days. Automatic systems with new wiring, concrete pads, or HOA approval wait times can add a day or more, but the physical install itself is typically a single-visit job.
Do I need HOA approval for a new gate in Fontana?
Many Fontana HOAs, especially in ZIP 92336, require written approval before a gate style or height changes. We work with the submitted specs and can adjust materials to match community guidelines without delaying the install.
Brands We Service in Fontana
Our Fontana trucks carry parts for the operators installed most in this area: Viking, Ghost Controls, DoorKing, and Elite. Because our crews are trained on nine major gate and operator brands, a DoorKing board replacement or Viking sensor fix is usually handled same-visit rather than ordered and scheduled out. See our brands for the full list of equipment we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Gate repair (diagnosis and minor fix) | $125 – $450 |
| Gate frame straightening and re-hang | $275 – $850 |
| Welded gate section replacement | $350 – $1,100 |
| Electric gate diagnosis and board repair | $195 – $800 |
| Operator replacement (residential) | $650 – $1,800 |
| Safety sensor replacement | $150 – $450 |
| Driveway gate installation (single swing, no operator) | $950 – $4,200 |
| Automatic gate installation (complete system with operator) | $1,850 – $6,500 |
| Sliding gate installation (cantilever, no operator) | $2,200 – $6,000 |
What pushes a Fontana job toward the higher end: solid steel or ornamental iron, operator brands with more expensive control boards, and anything requiring new electrical work or concrete. What doesn’t change: the price you’re quoted is the price you pay. We confirm the number before any work starts.
Neighborhoods We Serve in Fontana
We work throughout all four Fontana ZIP codes, from the older blocks near downtown to the newer developments along Duncan Canyon and beyond. Our typical response time for gate repair calls in Fontana is same-day or next-day, depending on call volume and part availability.
- Downtown Fontana (92335)
- North Fontana (92336)
- Southridge (92337)
- Sierra Lakes (92336)
- West End (92335)
Service Area – Cities Near Fontana
Ontario Gate Company is based in Ontario and runs routes through Fontana and the surrounding Inland Empire every week. We regularly serve Bloomington, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA, so if your property sits on the edge of Fontana, you’re still in our coverage area.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
Most Fontana gate repair calls are reached the same day. Since we’re based in Ontario and run dedicated Fontana routes, you’re not waiting on a company driving in from Los Angeles or Orange County.
Yes. We’ve installed and repaired gates in HOA-governed communities across ZIP 92336. We work from the HOA’s approved spec list and can provide whatever documentation the management company requests.
We carry heavier-gauge hinges, rust-resistant hardware, and operators sealed against dust and windblown sand, all chosen specifically for the heat and Santa Ana conditions Fontana gates face. Parts that aren’t on the truck are typically available within one to two business days.
If your gate is sagging, stuck, or won’t open, call Ontario Gate Company at (855) 707-3634. We’ll diagnose it on-site, quote the repair before starting, and get your gate back in operation. Fontana, CA has depended on us since 2011.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Yusuf Aziz"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Michael Rhodes"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen