Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highgrove, CA
Gate installation in Highgrove, CA typically runs $1,850 to $7,400 for a complete driveway gate system, with most semi-rural properties here landing between $3,200 and $5,500 because of long runs, heavier custom gates, and hillside post work. We’re Ontario Gate Company, and we’ve served Highgrove since 2011. We specialize exclusively in gates, so when a Box Springs foothills property needs a gate that holds true through Santa Ana season, we understand exactly what that soil and wind will do to posts, hinges, and operators. Call us at (855) 707-3634 for a free estimate.
Why Highgrove Homes Are Different
Highgrove sits unincorporated in Riverside County, tucked against the Box Springs foothills where lots run larger and more rural than the tract subdivisions you find a few miles west in Riverside proper. That changes the work. Highgrove gates are more likely to be long, wide driveway entries built for ranch-style homes with detached shops, corrals, and deep setbacks, not the standard pedestrian gates on a 6,000-square-foot lot. Many are field-fabricated or custom-built rather than factory-standard units, which means posts set in native soil, heavier swing leaves, and operator runs that stretch farther than a typical suburban install.
The climate compounds it. Summer heat cycling through the Inland Empire dries out the ground, and properties backing onto the hillsides watch their posts shift as soil contracts. A gate that hangs true in March can drag or sag by August. Then the Santa Ana winds funnel through the Box Springs corridor and hit those same gates broadside, working hinges loose and straining automatic openers far faster than what you’d see in a coastal community. Highgrove isn’t a place where a gate gets installed and forgotten. It’s a place where the installation decisions made on day one determine whether you’re adjusting hinges every season or not.
Styles & brands we work with
Our Main Highgrove Services
Most Highgrove homeowners and property managers call us for one of two things: a gate that’s stopped working correctly, or the electrical and automated system behind it. Here’s what each involves locally.
Gate Repair in Highgrove
Repair work here usually means mechanical failure: sagging leaves on long driveway runs, hinges pulled loose by wind load, posts that shifted during the dry season, or a gate that scrapes the ground after the soil settles. Highgrove’s rural parcels often have heavier custom gates with more metal and more mass, so every component carries more stress. We diagnose on-site, identify whether the post, hinge, or leaf is the actual failure point, and restore the gate to full function rather than just tightening what’s loose. For the full scope of mechanical repair in the 92313 ZIP code, see Gate Repair in Highgrove.
Electric Gate Repair in Highgrove
When the operator stops responding, the issue is usually in the motor, the control board, a safety sensor, or the power supply. Highgrove’s heat and wind exposure shortens the life of capacitors and boards, and dust from dry hillside lots works into limit switches and contacts. Our electric gate repair technicians handle motors, control boards, loop detectors, safety devices, and access-control integration as a core competency, not an add-on. That means a LiftMaster or Viking operator gets diagnosed by someone who already knows its common failure points. See Electric Gate Repair in Highgrove for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highgrove
Gate installation in Highgrove means planning for wind, heat, and soil movement before the first post goes in. On a semi-rural parcel with a long, wide driveway, a gate that’s not spec’d for Santa Ana gusts and dry-season post shift will need constant adjustment. We size every installation for the actual conditions on the property, from post depth in hillside soil to operator torque for a heavier custom leaf. For the complete scope of what we install, visit Gate Installation. Our work covers everything from residential swing gates to commercial slide operators, and we’ve installed systems using every major brand on the market.
Automatic Gate Installation
Signs you need it
Your property is getting a gate where none exists, or a manual gate is being used daily and the opening and closing routine has become a real operational burden on a long Highgrove driveway.
What it costs in Highgrove
Automatic gate installation in Highgrove typically runs $1,850 to $7,400 depending on gate size, operator type, and access-control complexity.
How we do it
We set the posts at the correct depth for the soil, hang the gate leaf, mount the operator, wire the control board and safety sensors, and then run full travel and obstruction testing before we leave.
Driveway Gate Installation
Signs you need it
Your entry is wide enough that a standard pedestrian gate won’t work, and you need a gate sized for vehicles with enough clearance for trucks, trailers, or ranch equipment.
What it costs in Highgrove
Driveway gate installation in the 92313 ZIP code typically ranges from $1,850 for a basic single-leaf setup to $7,400 for a wide custom system with automation.
How we do it
We measure the actual opening width and slope, confirm post placement against property lines and any county setback requirements, then fabricate or order the leaf to match the opening and install with an operator matched to the gate’s weight and wind exposure.
What Gate Installation Costs in Highgrove
| Item | Typical range in Highgrove |
|---|---|
| Basic single-leaf driveway gate | $1,850 – $3,200 |
| Custom wide or hillside driveway gate with automation | $3,200 – $5,500 |
| Full commercial or heavy-duty slide system | $5,500 – $7,400 |
How long does gate installation take in Highgrove?
Most residential driveway gate installations in Highgrove take one to two days once materials are on site. Custom gates with longer fabrication times add lead time before installation begins. We’ll give you a written schedule at the quote.
Do I need a permit to install a gate in Highgrove?
Highgrove is unincorporated Riverside County, so gate installation often falls under county rules rather than a city permitting office. Requirements vary by parcel and whether the gate swings over public right-of-way. Call (855) 707-3634 and we’ll help you confirm what applies to your specific property.
Brands We Service in Highgrove
We work on all major gate operators, and in Highgrove that means a lot of DoorKing, Elite, and Viking units on ranch and commercial properties, plus Ghost Controls systems on residential installs. Our technicians arrive knowing each brand’s common failure points, which cuts diagnostic time and prevents unnecessary parts swaps. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highgrove, CA
| Service | Typical range in Highgrove |
|---|---|
| Standard gate repair | $180 – $340 |
| Complete hinge or post replacement | $450 – $900 |
| Electric gate repair (operator, board, sensor) | $340 – $1,100 |
| Replacing an existing automatic gate | $1,850 – $4,200 |
| Basic single-leaf driveway gate installation | $1,850 – $3,200 |
| Custom wide or hillside driveway gate with automation | $3,200 – $5,500 |
| Full commercial or heavy-duty slide system | $5,500 – $7,400 |
What pushes pricing up in Highgrove is the rural parcel layout: longer operator runs, heavier custom leaves, and hillside post work on properties backing the Box Springs foothills. Every price is quoted and agreed before any work starts, so the number we give you on the phone is the number you’re approving.
Neighborhoods We Serve in Highgrove
We cover the entire 92313 ZIP code and the unincorporated county parcels surrounding it, including the areas along Box Springs Road and the foothill-adjacent lots where driveway gates run long and heavy.
- Box Springs foothills area
- North Highgrove rural parcels
- Highgrove proper along Center Street
- County parcels east toward the Badlands
Service Area – Cities Near Highgrove
Beyond Highgrove, our gate repair and installation service area covers the surrounding Inland Empire communities. If you’re in Grand Terrace, CA or Colton, CA, we’re close by. We also serve Loma Linda, CA and Rubidoux, CA for gate work of every scope.
Serving Highgrove, CA — Our Local Coverage Area
We’re based in the Highgrove area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highgrove
For most repair calls in the 92313 ZIP code, we can typically schedule same-day or next-day service depending on our dispatch schedule. Gate repair and electric gate repair calls get priority because a failed gate means a compromised entry. Call (855) 707-3634 and we’ll give you a straight answer on timing.
Yes. Highgrove has a mix of residential ranch properties and small commercial or agricultural parcels, and we service both. Our technicians are trained on residential swing operators as well as commercial slide systems, so the same crew can handle a driveway gate on Center Street or a sliding gate on a county parcel.
High winds in the Box Springs corridor can knock a gate leaf out of alignment, trip a safety sensor, or overload an operator. Disconnect the operator if it’s safe to do so and manually secure the gate, then call us. We diagnose on-site and get the system back in operation without guessing at the failure.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highgrove Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Nabil Karam