Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Glen Avon, CA | Ontario Gate Company
We’re Ontario Gate Company, an independent Glen Avon Gate Repair team, and we specialize in Ghost Controls openers. If your Ghost Controls gate won’t open, won’t close, or cycles erratically, call us at (855) 707-3634. What makes our Ghost Controls work different in Glen Avon specifically is how many custom river-bottom and semi-rural gates we see that were never designed for automation when the opener was bolted on. That means the repair isn’t just the opener, it’s the marriage between the opener and a gate that fights it.
Our technicians know the quirks of Ghost Controls boards, limit switches, and solar-charging systems. We work across all of Glen Avon, ZIP 92509, from the older ranch lots to the newer tracts. If your gate is down, we can usually get to you the same day.
Why Glen Avon Residents Choose Us for Ghost Controls Service
Gates are all we do. Not fences, not garage doors, not general contracting. Ontario Gate Company specializes exclusively in gate repair, electric gate repair, and gate installation. Every part on our trucks, every diagnostic tool, and every hour of training our technicians receive is oriented around one trade. When your Ghost Controls opener goes down in Glen Avon, you don’t want someone flipping through a manual on your driveway. You want someone who has seen your exact failure mode before.
Noel Carrasco, our owner, grew up near the Cucamonga-Guasti Regional Park area and has worked gates across the Inland Empire for over two decades. He learned the electrical and mechanical fundamentals through the Industrial Technology program at Chaffey College, then spent years turning that into field knowledge on commercial lots and residential driveways. His rule is simple: “Know what you’re looking at before you touch it.” That’s why our Ghost Controls diagnostics start with a systematic check of the control board, limit switches, and power supply rather than swapping parts on a hunch.
We’re also independent, not manufacturer-affiliated or authorized. That matters because our recommendation to repair, replace, or upgrade a Ghost Controls unit is based on what’s right for your gate and your driveway, not on a corporate relationship. We stock OEM Ghost Controls parts for critical components like control boards and motors. For accessories, we’ll offer a quality aftermarket option when the performance and longevity are genuinely equal at a better price.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Glen Avon
Here’s what we see most often on Riverside Ghost Controls service calls in this part of Riverside County:
- Control board failures from voltage spikes and heat. Glen Avon summers routinely push past 100°F, and the electronics inside a Ghost Controls control box bake. Add a voltage spike from the local grid and the board can fail outright or start behaving erratically, opening halfway, ignoring remotes, or cycling on its own. We test the board on-site before recommending replacement.
- Battery degradation on solar-compatible units. Many Glen Avon properties run long driveways where pulling new conduit for AC power would be expensive. So homeowners use Ghost Controls solar-compatible openers. The problem is that lead-acid and even lithium batteries degrade faster in sustained heat. We see older batteries that won’t hold charge through a single night of use. We test capacity under load, not just resting voltage.
- Limit switch misalignment from warped gates. Santa Ana winds and dry heat are hard on wooden gates. When a gate warps or sags even an inch, the Ghost Controls limit switches no longer register the fully open or closed position correctly. The opener strains, the motor draws excessive current, and the gate stops mid-cycle. We realign the gate itself before touching the switches, otherwise the fix won’t hold.
- Remote and keypad signal problems from dust and temperature swings. Glen Avon sits close to the Santa Ana River bottom, and the dust is real. It gets into keypad contacts and degrades remote performance over time. Temperature swings between hot days and cool nights also stress solder joints on older Ghost Controls receiver boards. Intermittent remote operation is usually not the remote itself; we test the receiver path before blaming the fob.
- Post flex on heavy custom gates. A Ghost Controls heavy-duty dual swing opener like the TDS2 exerts serious force. If the gate post was set for a manual gate, it flexes or shifts under that load. The opener then works harder, the limit positions drift, and the whole system degrades. We reinforce or re-set posts when they’re no longer rigid enough, which on Glen Avon river-bottom soil sometimes means a deeper footing.
Ghost Controls Service in Glen Avon: What Local Conditions Mean for Your Equipment
Glen Avon’s older semi-rural tracts along the Santa Ana River bottom have something you won’t find in most of Jurupa Valley or Ghost Controls repair in Rubidoux: custom-built gates and repurposed agricultural gates that predate the idea of automation. A homeowner decides to add a Ghost Controls opener to a gate that was welded for a manual latch, and suddenly the opener is fighting a gate with no straight mounting surface, a post that was never designed for lateral force, and a swing arc that isn’t true. Standard installation kits assume a square, plumb, properly hung gate. On river-bottom custom gates, that assumption fails.
This is where most general repair companies get stuck. They’ll bolt the Ghost Controls opener bracket to whatever surface exists and call it done. Six months later the limit switches are drifting, the motor is overheating, and the homeowner is told they need a new opener. What they actually need is a proper mounting solution. We fabricate custom brackets, reinforce posts, and sometimes re-hang the gate itself so the opener isn’t working against a structural problem. That’s a skill set built from years of on-site fabrication in Glen Avon specifically, and it’s not something you’ll find in a generic Ghost Controls troubleshooting guide.
We recently repaired a Ghost Controls TDS2 dual swing opener on a custom ranch gate off a long driveway near the Santa Ana River bottom. Summer heat had warped the gate enough to throw the limit switches out of alignment, and the motor was working against the misalignment. We straightened and reinforced the gate frame, replaced the limit switches, and added a heavier mounting plate to the post. The system runs smoothly now, and the homeowner can actually rely on it to close at night.
Ghost Controls Models & Products We Service in Glen Avon
We service the full Ghost Controls lineup you’re likely to have on a Glen Avon property. That includes the Ghost Controls Heavy-Duty Dual Swing Gate Opener series like the TDS2, the Single Swing Gate Opener series like the TS1, and the solar-compatible opener line common on long driveways where AC power is impractical. We also handle Ghost Controls keypads, remote accessories, and the associated receiver hardware.
Our parts policy is straightforward. For control boards, motors, and limit switches, we use OEM Ghost Controls parts. Compatibility failures on those components aren’t worth the risk, especially on a heavy dual swing gate. For accessories like remotes and keypads, we stock both OEM and proven aftermarket options so you can choose based on budget and urgency. We carry enough common Ghost Controls parts on the truck that most Glen Avon repairs are completed in a single visit. If we need to order something specific, we’ll tell you the timeline before any work starts.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Glen Avon
Most Ghost Controls repair work in Glen Avon falls into predictable ranges. A service call and diagnostic runs $75 to $125, and that fee is credited toward the repair if you proceed. Control board replacement typically lands between $250 and $450 including the part and labor. Limit switch replacement or realignment is usually $100 to $200. Battery replacement on solar-compatible units runs $80 to $180 depending on the battery type. Motor replacement on a single swing opener like the TS1 is generally $300 to $500, while a dual swing TDS2 motor runs $400 to $650.
What drives cost in Glen Avon more than anything is the condition of the gate itself. If the gate is warped, sagging, or mounted on a post that’s shifting, the opener repair is only half the job. We quote the full scope before we touch anything, and the price you approve is the price you pay. No after-the-fact surprises. Call (855) 707-3634 for a free estimate on your specific Ghost Controls setup.
Serving Glen Avon, CA — Our Local Coverage Area
We’re based in the Glen Avon area and know this community well, including nearby Ghost Controls service in Sunnyslope. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Glen Avon
It’s almost always the limit switches first, especially in Glen Avon where heat-warped gates throw off alignment. We test the limit switch circuit and the control board output separately before deciding which part to replace. If the gate itself has warped, we fix that first because replacing switches without fixing the gate means the problem returns. Call (855) 707-3634 and we’ll diagnose it on-site.
Yes, and this is one of the most common jobs we do in Glen Avon. Custom gates from the river-bottom tracts were rarely built with automation in mind, so the install usually requires custom mounting brackets and sometimes a reinforced post. We assess the gate’s swing arc, post rigidity, and mounting surface before recommending the right Ghost Controls model for the weight and width. Some gates are better served by a heavy-duty dual swing opener, others by a single swing unit, and we’ll tell you which without upselling.
Sustained triple-digit heat shortens battery life meaningfully. We see Ghost Controls batteries in Glen Avon fail in three to five years instead of the five to seven you might get in a coastal climate. We test batteries under load, which catches weak cells that a resting voltage reading misses. If you’re on a solar-compatible Ghost Controls opener, ask us to check your panel output at the same time, because dust from the river bottom reduces charging efficiency. Call (855) 707-3634 and we’ll test your whole power path.
The most common cause in Glen Avon is receiver board degradation from temperature cycling, followed by dust in the keypad contacts. We test the receiver path with a known-good remote before replacing anything, because a new fob won’t fix a failing receiver. Sometimes the fix is a receiver board, sometimes it’s a reprogramming issue, and sometimes it’s an antenna placement problem on a gate that sits below grade near the river bottom.
Yes. Glen Avon’s half-acre-plus lots often mean a driveway gate and a separate pedestrian or pasture gate, sometimes both automated. We service multi-gate properties as a system, checking that both Ghost Controls openers are properly programmed and that accessories like keypads work across all access points. We also handle the intercom and access-control side of things where a property has a Ghost Controls opener tied into a call box.
Service Areas Near Glen Avon
In addition to Glen Avon, we service Ghost Controls openers throughout the surrounding Inland Empire. If you’re in Glen Avon service area or in Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, Los Serranos, or La Verne, call us. We also run service routes through Ghost Controls service in Norco and Ghost Controls service in Pedley on a regular basis. For anything Ghost Controls, our main page covers Ghost Controls sales & service.
Book Your Ghost Controls Service in Glen Avon Today
If your Ghost Controls gate is down or running unreliably, don’t wait. Call (855) 707-3634 for a free estimate. We’ll diagnose the problem on-site, quote the repair before any work begins, and get your gate closing and opening the way it should.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving Glen Avon and the Inland Empire.