Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Santa Ana, CA
Gate installation in Santa Ana means working with 1910s bungalows on tight lots, Spanish Colonial Revival homes with original ironwork, and 1990s tract houses that added automatic slide gates years after the build. The dense pre-1960 corridors in 92701 and 92702 run on shallow post footings and property-line setbacks that most newer Orange County subdivisions never had to navigate. We handle new gate installation, electric gate installation, and full replacement of rusted or leaning driveway gates across 92701, 92702, 92735, and 92799. Call (855) 707-3634 for a measured, written price before any work starts.
Why Santa Ana Homes Are Different
Santa Ana is one of Orange County’s oldest cities. Its housing stock runs from Craftsman bungalows and Spanish Colonial Revival homes built between the 1910s and 1950s, to mid-century tract infill and later subdivision homes from the 1990s and 2000s. That age spread creates two very different gate problems. In the older corridors off 4th and 17th Streets, gateway posts were often set in shallow concrete. Decades of drought and wet cycles have pulled moisture out and pushed it back in, and many of those posts now lean. A gate that sags or drags in Santa Ana is frequently a post-settlement problem, not a hinge failure, and fixing it means resetting the post or sleeving it, not just swapping a hinge bracket.
The climate works against every exterior metal component here. Hot, dry Santa Ana wind events funnel through the canyon gap each fall, loading tracks and operators with grit and heat-cycling control boards. The rest of the year, the coastal marine layer keeps iron damp enough to rust at weld seams and hinge hardware. Wrought-iron gates that were welded by local fabricators forty or fifty years ago are now rusting at the base of the hinge posts. When we replace them, we have to match the vintage ironwork, which means sourcing or fabricating profiles that Home Depot doesn’t stock. The city also enforces front-setback and right-of-way rules on older lots, so placement matters as much as metalwork.
Styles & brands we work with
Our Main Santa Ana Services
Santa Ana homeowners call us most often for two things: a gate that won’t stay up or won’t close, and an operator that stopped responding. Both are covered below with dedicated Santa Ana pages.
Gate Repair in Santa Ana
Most gate failures in Santa Ana are mechanical before they’re electrical. Hinge welds crack, post anchors pull loose, chain-link fabric tears at the rail, and casters wear flat from years of rolling over cracked concrete. In the older 92701 neighborhoods, rust at the hinge posts is the leading cause of a gate that suddenly drops. We diagnose on-site, then rebuild or replace the failed component rather than patching it. A gate that’s been dragging for months has usually worn more than one part, so the repair quote covers everything found during inspection, not just the first symptom. Read the full breakdown on our Gate Repair in Santa Ana page.
Electric Gate Repair in Santa Ana
Electric gate repair in Santa Ana usually comes down to the operator, the safety system, or the power feed. Santa Ana wind events push dust into control boards and limit switches, and marine-layer moisture corrodes terminal connections over time. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, which means your technician already knows the failure points on your brand before pulling into the driveway. Same-day diagnosis is available for failed operators in most Santa Ana ZIP codes. For control boards, loop detectors, photo eyes, and access integration, see Electric Gate Repair in Santa Ana.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Santa Ana
Gate installation in Santa Ana has to respect two things most other Orange County cities don’t: older properties with shallow post footings and city setback rules that limit how far a gate can swing into the right-of-way. A new automatic gate on a 1920s Craftsman lot off 17th Street often needs new post footings poured deeper than the originals, because the old ones were never built to hold a motorized gate and an operator’s repeated torque. On 1990s subdivision homes in 92705 and 92707, we’re usually installing slide gates on lots that were never pre-wired for them, which means trenching power, setting the track, and wiring photo eyes and safety edges at the same time. Our full Gate Installation service covers the gate, the operator, and the electrical run, including the safety devices Santa Ana’s permit office expects to see.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close a manual gate every day, or a previous operator failed and the gate has been chained open for weeks.
What it costs in Santa Ana
Automatic gate installation in Santa Ana typically runs $4,500 to $11,000 depending on gate material, operator type, and whether power already exists at the gate location.
How we do it
We measure the opening, confirm the swing or slide direction against city setback limits, set posts to the required depth for the gate’s weight, mount the operator, and wire and test the full safety system.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through at the hinge posts, leaning from post settlement, or sized wrong for the cars that use it.
What it costs in Santa Ana
Driveway gate installation in Santa Ana typically falls between $3,500 and $9,000, with vintage-style iron gates on older 92701 lots running higher due to custom fabrication.
How we do it
We remove the old gate and hardware, set or reset posts at the correct depth for Santa Ana soil, hang the new gate with adjustable hinges, and fit a latch or operator as specified.
What Gate Installation Costs in Santa Ana
| Item | Typical range in Santa Ana |
|---|---|
| Manual driveway gate | $1,800 – $4,500 |
| Automatic driveway gate | $4,500 – $11,000 |
| Operator and safety package | $1,800 – $3,500 |
Do I need a permit for a new gate in Santa Ana?
Most driveway gates don’t need a permit if they stay behind the front setback and outside the public right-of-way, but powered gates with an electrical run usually require an electrical permit. We confirm placement against city standards before quoting so there are no surprises after the gate goes in.
How long does gate installation take in Santa Ana?
Most residential gate installations finish in one to two days once posts and concrete have cured. Vintage-style iron gates with custom fabrication add lead time, and we’ll give you a written schedule before work begins.
Brands We Service in Santa Ana
We service operators and control systems from BFT, Linear, Viking, and Ghost Controls, alongside five other major brands our technicians train on. Because we work exclusively on gates, our Santa Ana techs carry brand-specific boards, limit switches, and safety components on the truck instead of ordering them after diagnosis. That means most operator repairs finish the same visit, not a week later. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Santa Ana, CA
| Service | Typical range in Santa Ana |
|---|---|
| Hinge replacement (welded or bolted) | $150 – $400 per hinge |
| Gate sag or post reset | $350 – $900 |
| Track or roller replacement | $250 – $700 |
| Chain-link fabric repair or replacement | $200 – $600 |
| Operator replacement | $950 – $2,800 |
| Control board replacement | $450 – $900 |
| Loop detector replacement | $350 – $750 |
| Photo eye or safety edge replacement | $200 – $500 |
| Manual driveway gate | $1,800 – $4,500 |
| Automatic driveway gate | $4,500 – $11,000 |
Two things push Santa Ana prices higher than inland Orange County: vintage ironwork that has to be matched rather than ordered from a catalog, and post footings that need to be dug deeper because drought cycles have cracked the original concrete. Every quote we give is the price before work starts, and if we find something additional during the job, we stop and get your approval before touching it.
Neighborhoods We Serve in Santa Ana
We cover all of Santa Ana, from the pre-1960 corridors where original iron gates are aging out to the newer automatic slide gate subdivisions. Response time for most repair calls is same-day or next morning across the city.
- Floral Park
- French Park
- West Floral Park
- Washington Square
- Morrison Park
Service Area – Cities Near Santa Ana
Our Santa Ana routes also cover the surrounding north and central Orange County cities. Homeowners in Tustin, CA and North Tustin, CA call us for the same older-iron and post-settlement repairs we see off 4th Street here, while Fountain Valley, CA and Orange, CA jobs tend toward operator replacement and newer slide gate work.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Santa Ana
For a gate stuck open or an operator that failed and left the driveway exposed, we aim for same-day dispatch across 92701, 92702, 92735, and 92799. Most Santa Ana repair calls are diagnosed on-site within 24 hours, and we carry common operator parts for BFT, Linear, Viking, and Ghost Controls on the truck to avoid a second visit.
Many Santa Ana subdivisions built in the 1990s and 2000s have HOA requirements for gate height, color, and material, especially in 92705 and 92707. We’ve installed enough gates in those communities to know when to ask for board approval, and we’ll flag it before you order a gate that the association will make you replace. Call (855) 707-3634 if you’re not sure what your HOA allows.
Yes. A new automatic gate in Santa Ana is not a metal job with electricity bolted on, it’s one system. We trench the power run, wire the operator, install photo eyes and safety edges to current code expectations, and test everything with a vehicle in the drive before we call the job done. The price for that full package is quoted upfront, before work begins.
If your gate is sagging on old posts, rusted at the hinges, or the operator stopped responding after the last Santa Ana wind event, call Ontario Gate Company at (855) 707-3634. We diagnose on-site, quote before work starts, and we’re in Santa Ana neighborhoods every week.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Ana Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez