Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Irvine, CA
Gate installation in Irvine means working inside the largest master-planned city in the United States, where nearly every entry gate sits under an HOA’s architectural review. We specialize exclusively in gates, and that narrow focus means we understand how a Woodbridge driveway gate differs from a Great Park community entry. Most Irvine homes were built from the 1970s onward, so we’re usually installing operators on existing wrought iron or wood gates rather than starting from bare posts. Call (855) 707-3634 for a free estimate on any gate installation in Irvine.
Why Irvine Homes Are Different
Irvine’s housing stock came up in planned villages, not organically. Woodbridge, Turtle Rock, Northwood, and Westpark were built out largely in the 1980s and 1990s, and the newer Stonegate and Great Park neighborhoods continued that pattern into the 2010s. The dominant style is Mediterranean or Santa Barbara: stucco walls, clay tile roofs, and decorative wrought iron or solid wood driveway gates. Those gates are almost always shared assets on private community streets, which changes the repair and installation process in a way you don’t see in older Orange County cities like Santa Ana.
The climate is the other factor. Irvine gets almost no rain, and the Santa Ana winds push hot, dry air through the canyons. Wood gates dry out, crack, and warp. Iron gates hold up structurally but their finishes fade under constant UV, and the rubber components in gate operators – wheels, seals, limit switch covers – bake and harden years before they would in a coastal climate. We stock parts accordingly, and we diagnose with that sun exposure in mind.
Then there’s the HOA layer. Across Irvine’s villages, a gate operator or iron gate has to be repaired or replaced to the association’s approved color and style. A faded black iron gate in Northwood often needs a specific finish matched to the community’s architectural standards, and the repair may be billed to the HOA rather than the individual homeowner. That approval step is a real part of the timeline, and we’re used to working within it.
Styles & brands we work with
Our Main Irvine Services
Most Irvine calls fall into two categories: the gate itself won’t move, or the electric operator that drives it has failed. Both are covered by the two Irvine service pages below.
Gate Repair in Irvine
A gate that sags, scrapes, or won’t latch is a mechanical repair job, and in Irvine it usually involves decades of sun exposure on hinges, wheels, and posts. Wood gates in Woodbridge warp and pull away from hinges, while tubular iron gates in Westpark develop cracked welds where the frame meets the uprights. We repair the physical gate first, then confirm the operator still functions once the gate moves cleanly. Gate Repair in Irvine covers the full range of mechanical work we do here.
Electric Gate Repair in Irvine
When the gate is mechanically sound but won’t open from the remote, keypad, or loop detector, the problem is in the operator: the motor, control board, safety sensors, or the low-voltage wiring feeding it. Dust from the dry hills and heat from Santa Ana events are hard on control boards and capacitors. Our technicians diagnose on-site, and we carry boards and sensors for the brands most common in Irvine’s communities. Electric Gate Repair in Irvine has the details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Irvine
Gate installation in Irvine usually means one of two jobs: replacing an operator on an existing HOA-approved gate, or building and hanging a new gate where the community or homeowner has already cleared the design. The dry climate means we favor materials and finishes that won’t crack or chalk in constant sun, and the HOA structure means we’re familiar with submitting the panel-photo or spec-sheet documentation associations ask for before work begins. Every installation is quoted in writing and the price is agreed before any work starts. Read more about how we approach the service on our Gate Installation hub page.
Automatic Gate Installation
Signs you need it
The gate is currently manual and the property or community needs keypad, remote, or phone-based entry.
What it costs in Irvine
Automatic gate installation in Irvine typically runs $3,500 to $9,000 depending on gate size, operator type, and access-control features.
How we do it
We mount the operator, run low-voltage power to it, install the safety edges and photo eyes, wire the keypad or access system, and set the open and close limits for the gate’s exact weight and travel.
Driveway Gate Installation
Signs you need it
The existing driveway gate is warped beyond repair, or a new gate is going in at a property that never had one.
What it costs in Irvine
Driveway gate installation in Irvine generally falls between $2,500 and $7,000, with the higher end covering custom iron or wood built to HOA specs.
How we do it
We set or reinforce posts, hang the gate with clearance for Irvine’s dry-season ground movement, and tie in the operator and safety systems if the gate is automated.
What Gate Installation Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Driveway gate and operator package | $3,500 – $7,000 |
| Custom wood or iron gate, no operator | $2,500 – $6,000 |
| Full automatic gate with access control | $5,000 – $12,000 |
Irvine’s HOA review requirements can add a week or two to the timeline but rarely change the gate price itself. What moves the number is gate size, operator type, and whether we’re running new power from the house or panel.
Does the HOA have to approve my new gate in Irvine?
Yes, in most Irvine villages. The association’s CC&Rs typically require architectural approval before a gate is installed or its finish is changed. We provide the dimensions, materials, and color information your management company asks for.
Can you install a gate without an operator, then automate it later?
We can, and it’s a common way to phase the cost. We’ll set the posts and hang the gate now, and leave the low-voltage conduit in place so an operator and keypad can be added without cutting concrete later.
Brands We Service in Irvine
We service Viking, Ghost Controls, DoorKing, and Elite operators across Irvine, and we keep boards, remotes, and safety components for these brands stocked for local callouts. That means a failed DoorKing board in a Turtle Rock community gate doesn’t wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Gate repair, mechanical | $180 – $450 |
| Gate realignment and hinge work | $250 – $600 |
| Gate operator repair | $250 – $550 |
| Control board replacement | $350 – $900 |
| Loop detector repair or replacement | $300 – $700 |
| Safety sensor replacement | $150 – $400 |
| Automatic gate installation | $3,500 – $9,000 |
| Driveway gate installation | $2,500 – $7,000 |
| Full automatic gate with access control | $5,000 – $12,000 |
In Irvine, the two factors that push a job toward the higher end are HOA finish-matching requirements and the need to run new power to a gate that was never wired. Every job is quoted before work begins, and that quoted number is what you pay unless we find something that needs your written approval to proceed.
Neighborhoods We Serve in Irvine
We serve the full Irvine area, including the 92617, 92618, 92619, and 92620 ZIP codes, and we can typically reach most Irvine gates within an hour to an hour and a half depending on the time of day and which freeway we’re crossing.
- Woodbridge
- Turtle Rock
- Northwood
- Westpark
- Stonegate and Great Park
Service Area – Cities Near Irvine
Ontario Gate Company has served Irvine since 2011, and we run calls in the surrounding south Orange County area as well. If your gate is in Tustin, CA, Aliso Viejo, CA, Santa Ana, CA, or North Tustin, CA, the same gate-only technicians cover those routes.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irvine
Most Irvine calls are reached within 60 to 90 minutes during business hours. Emergency calls after hours are scheduled around technician availability, not a fixed dispatch window. Call (855) 707-3634 and we’ll give you a real arrival estimate for where you are.
If the gate is a shared community asset, the HOA or management company typically owns the repair decision and the invoice. We work directly with Irvine property managers and know the documentation most associations need before we start.
Yes. We coordinate with the gatehouse or management office for access, and we’re already familiar with the operator and access-control systems used across Irvine’s villages. That reduces the time spent on-site and the chance of a return visit.
Need a gate installed, repaired, or automated in Irvine? Call Ontario Gate Company at (855) 707-3634 for a free estimate. We specialize exclusively in gates, and we’ll quote the job before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah