Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Aliso Viejo, CA
Gate installation in Aliso Viejo usually means replacing a developer-installed wrought-iron or vinyl gate that’s now 20 to 30 years old, or adding a gate to a hillside driveway where the slope changes how the operator has to be mounted. We’re Ontario Gate Company, and gates are the only thing we work on. Most of the Aliso Viejo homes we visit were built between 1988 and 2005, which means the original gates, operators, and intercoms are reaching the end of their service life at roughly the same time. If you need a new gate, a repair, or an electric system brought back to full function, call (855) 707-3634 for a free estimate.
Why Aliso Viejo Homes Are Different
Aliso Viejo is a master-planned community built almost entirely between the late 1980s and early 2000s. That single construction window created a very specific repair pattern: the original developer-installed gates, operator arms, and intercom systems are now failing all at once across entire villages. When we open a gate panel in Aliso Viejo, we almost always find the same generation of components, which makes matching original vendor parts the recurring challenge rather than the exception.
The terrain adds a second layer. Much of Aliso Viejo sits on graded hillsides and canyon-edge lots, particularly above Glenwood Drive and along the Aliso Creek corridor. Gate posts shift or settle on these slopes, so a gate that hangs and latches fine on flat ground will bind and drag here. That’s a footing problem, not just a hinge problem. Combine the shifting posts with inland Orange County’s hot, dry summers and Santa Ana wind events, and you get dried-out wood posts, warped vinyl panels, and rust forming at iron weld seams. When winter rains arrive, failing post footings on the hillside lots become obvious. We diagnose these conditions on-site before recommending any repair or replacement, because fixing a hinge on a settled post just means the gate will bind again next season.
Styles & brands we work with
Our Main Aliso Viejo Services
Aliso Viejo homeowners and property managers call us most often for two things: mechanical gate repair and electric gate repair. Here’s what each involves in this city.
Gate Repair in Aliso Viejo
Mechanical gate repair in Aliso Viejo is dominated by the original 1988 – 2005 developer installations. Wrought-iron gates rust at the weld seams after 25 years of dry heat and coastal air, and vinyl gates warp from summer sun exposure. We also see post settling on the graded hillside lots above Glenwood Drive, where a gate that once swung cleanly now drags on the concrete. We match hinges, rollers, and latch hardware to the original vendor spec so the repair holds. Gate Repair in Aliso Viejo covers the full scope, from sagging driveway gates to courtyard entry gates.
Electric Gate Repair in Aliso Viejo
Electric gate systems here were installed in a narrow window, so the operator arms, control boards, and safety sensors in Aliso Viejo are reaching end-of-life in clusters. We repair motors, loop detectors, photo eyes, and access-control integration, including intercom systems tied to HOA community gates. A common Aliso Viejo failure is a control board that works intermittently after years of Santa Ana heat stress inside a metal enclosure. Electric Gate Repair in Aliso Viejo covers diagnostics and repair for residential and commercial systems.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Aliso Viejo
Most Aliso Viejo gate installation work we take on is either replacing a 20-to-30-year-old developer gate that’s no longer worth repairing, or adding an automatic gate to a driveway that was never gated. The hillside lots above Glenwood Drive and the Aliso Creek corridor change how we approach the job: posts need deeper footings where the grade has settled, and operators need slope-adjusted mounting so the gate doesn’t fight gravity on every cycle. We also work with the HOA requirements that govern many Aliso Viejo villages, which means getting gate style and height approved before fabrication begins. Our full service is covered at Gate Installation.
Automatic Gate Installation
Signs you need it
You’re replacing a gate on a sloped Aliso Viejo driveway where a manual gate has become unsafe or impractical to open by hand.
What it costs in Aliso Viejo
Automatic gate installation in Aliso Viejo typically runs $4,800 – $12,500 depending on gate size, operator type, and how much slope correction the driveway requires.
How we do it
We set or replace the posts with footings sized for the slope, mount the operator with slope-appropriate brackets, run power to the operator, install safety edges and photo eyes, and test the full cycle including the reverse function.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has rusted through at the weld seams, warped beyond hinge adjustment, or the posts have shifted on the graded hillside so far that no hinge repair will hold.
What it costs in Aliso Viejo
Driveway gate installation in Aliso Viejo generally costs $3,800 – $10,000 depending on gate width, material, and whether we’re replacing the posts or working with existing footings.
How we do it
We remove the old gate, inspect the existing footings for settlement, pour new footings where the grade has shifted, fabricate or source the replacement gate to the HOA-approved spec, hang it, and set the latch and close stops.
Sliding Gate Installation
Signs you need it
Your Aliso Viejo lot has a short or steep driveway apron where a swing gate would hit grade or a retaining wall before it reaches full open.
What it costs in Aliso Viejo
Sliding gate installation in Aliso Viejo typically runs $5,500 – $14,000 including the track, cantilever hardware, and operator, with the higher end for long commercial-grade spans.
How we do it
We set the track or cantilever posts on compacted base, hang the gate, mount the operator and rack, install the catch posts and end stops, and wire the safety loops so the gate reverses on obstruction.
What Gate Installation Costs in Aliso Viejo
| Item | Typical range in Aliso Viejo |
|---|---|
| Driveway gate (single swing, iron or aluminum) | $3,800 – $8,000 |
| Automatic gate with operator | $4,800 – $12,500 |
| Sliding gate with track and operator | $5,500 – $14,000 |
Hillside lots above Glenwood Drive and the Aliso Creek corridor push toward the higher end, because posts often need deeper footings and the operator mounting has to be adjusted for the grade. Every quote is agreed in writing before we start work.
How long does a gate installation take in Aliso Viejo?
Most Aliso Viejo gate installations take one to three days on-site. HOA approval and custom gate fabrication add lead time before we schedule the physical work, typically one to three weeks depending on the village’s architectural review process.
Do I need HOA approval for a new gate in Aliso Viejo?
In most Aliso Viejo villages, yes. The HOA governs gate style, height, and color for visible driveway and courtyard entries. We prepare the appropriate spec sheet for your HOA submission so approval doesn’t stall the project. Call (855) 707-3634 and we’ll walk you through it.
Brands We Service in Aliso Viejo
We service Viking, Ghost Controls, DoorKing, and Elite operators in Aliso Viejo, along with five other major brands. Because we’re a gate-only shop, we keep the common control boards, safety sensors, and remote receivers for these brands in stock, which means a diagnosed board swap often happens the same visit rather than after a parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Aliso Viejo, CA
| Service | Typical range in Aliso Viejo |
|---|---|
| Driveway gate repair | $180 – $520 |
| Gate opener repair | $225 – $600 |
| Control board replacement | $350 – $900 |
| Gate off-track repair | $200 – $450 |
| Hinge replacement | $150 – $400 |
| Gate sensor / photo eye repair | $175 – $425 |
| Driveway gate installation | $3,800 – $10,000 |
| Automatic gate installation | $4,800 – $12,500 |
| Sliding gate installation | $5,500 – $14,000 |
Two things push pricing higher in Aliso Viejo: settled posts on hillside lots that need footing work before any hinge or operator repair will hold, and the original 1988 – 2005 vendor components that sometimes require sourcing a matching part rather than a universal replacement. Whatever the job, the price is quoted and agreed before any work starts, and estimates are free.
Neighborhoods We Serve in Aliso Viejo
We work throughout Aliso Viejo, covering both ZIP codes 92656 and 92698. Our usual response time for gate repair calls in the city is same-day or next-day depending on call volume.
- Glenwood
- Westridge
- Canyon View
- Vista del Sol
- Aliso Creek corridor
Service Area – Cities Near Aliso Viejo
Ontario Gate Company serves Aliso Viejo and the surrounding South Orange County cities. If your property is just over the city line, we likely cover it too. We regularly work in Laguna Woods, CA, San Joaquin Hills, CA, Laguna Hills, CA, and Irvine, CA.
Serving Aliso Viejo, CA — Our Local Coverage Area
We’re based in the Aliso Viejo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aliso Viejo
For gate repair and electric gate repair calls in Aliso Viejo, we typically offer same-day or next-day dispatch. Gate installation is scheduled, not dispatched, because it requires measurement and HOA coordination. Call (855) 707-3634 to check today’s availability.
Yes. We repair and maintain HOA-owned community gates across Aliso Viejo’s planned villages, including swing and slide operators, loop detectors, and access-control integration. HOA work often requires a board-approved quote, and we provide the documentation property managers need.
The housing stock is nearly all 1988 – 2005 tract development, so the gates and operators are a single generation that’s now aging out at the same time. Add the graded hillside terrain above Glenwood Drive and the Aliso Creek corridor, and you get settled posts and slope-stressed operators that flat-land cities don’t see as often.
If your gate is sagging, binding, or not responding to the remote in Aliso Viejo, call Ontario Gate Company at (855) 707-3634. We’ll diagnose the problem on-site and give you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aliso Viejo Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah