Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in San Bernardino, CA | Ontario Gate Company
We repair Mighty Mule gate openers across San Bernardino, and we do it as an independent service provider, not a factory-authorized shop. What makes our work different here comes down to soil: the decomposed granite under much of this city moves, and when posts lean, Mighty Mule arms bind and boards overheat. Call (855) 707-3634 for a free estimate.
Ontario Gate Company is a gate-only shop. Every technician on our truck works on gate operators day in and day out: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock Mighty Mule control boards, arms, batteries, and hardware, and we know these openers well enough to tell you when the motor is fine and the post is the problem. If you’re looking for Mighty Mule sales & service done by people who work on gates exclusively, you’ve found the right crew.
Why San Bernardino Residents Choose Us for Mighty Mule Service
Noel Carrasco, our owner, has been working gates in the Inland Empire for over two decades. He grew up near the Cucamonga-Guasti Regional Park area and learned the electrical and mechanical side of this trade through the Industrial Technology program at Chaffey College in Rancho Cucamonga. Years of field work across Ontario, Mighty Mule in Rialto, and the surrounding cities turned that into something more useful: the ability to look at a Mighty Mule opener and know, usually within minutes, whether the fault is in the board, the arm, the limits, or the ground the post sits in.
Know what you’re looking at before you touch it. That’s how we run every Mighty Mule call in San Bernardino. We carry genuine Mighty Mule replacement parts, and when an aftermarket equivalent is the smarter financial call for an older unit, we’ll tell you that plainly and quote both options. No guesswork, no parts-slinging.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in San Bernardino
- Control boards failing after heat stress and Santa Ana power flickers. Summer afternoons in San Bernardino push 100°F regularly, and wind-driven outages send surges through gate circuits. We see dead MM371W and MM572W boards more often here than in coastal cities. If the board is repairable, we say so. If it’s fried, we carry replacements.
- Swing arms seizing or torquing when posts lean. The decomposed granite soil under older San Bernardino lots lets posts twist over time. A Mighty Mule arm that’s out of alignment fights the gate on every cycle, which burns out actuators and strips hardware. We don’t just swap the arm; we find out why it’s fighting.
- Limit switches drifting as gates sag and drag. When a gate drops half an inch in the soil, the travel limits you set last year aren’t right anymore. The opener stalls, reverses, or refuses to close. Re-teaching limits helps temporarily, but the real fix is re-plumbing the gate and post.
- Keypads and receivers corroding from dust and temperature swings. Dry, gritty air works into keypad seals and remote housings. We replace corroded contacts, re-seal the units, and verify signal range from the street, not from three feet away.
- Battery backups that won’t hold a charge. Heat kills lead-acid batteries faster than anything else. San Bernardino summers bake the backup batteries inside Mighty Mule control boxes. We test them under load before declaring them dead.
Mighty Mule Service in San Bernardino: What Local Conditions Mean for Your Equipment
Here’s what we know from working this city: San Bernardino’s older west-side and downtown blocks have many gates mounted on original posts set directly into sandy alluvial soil without concrete footings. After a few hot summers and winter rain cycles, those posts twist and lean, throwing the gate out of plumb. When a Mighty Mule opener is bolted to that mess, it binds mid-travel. The arm preloads. The board overheats trying to push against a gate that’s fighting back. We rarely see this in newer tract developments east of the 215, where footings were poured properly. But on the older west-side blocks, it’s the single most common root cause behind a Mighty Mule that “just stopped working.” We fix it by resetting the post in concrete, realigning the gate, and re-teaching the limits; not by selling you a motor you don’t need.
On a recent call near downtown, a homeowner’s Mighty Mule MM371W swing opener would stall halfway open and then reverse. We found the original gate post twisted in the sandy soil, preloading the arm. We reset the post in concrete, realigned the gate, and re-taught the limits. No control board needed. The gate cycles smoothly now, and the homeowner avoided an unnecessary motor replacement.
Mighty Mule Models & Products We Service in San Bernardino
We work on the full Mighty Mule residential line: the MM371W and MM572W swing openers, the FM200 and FM500 models, and their compatible accessories. We stock genuine Mighty Mule control boards, swing arms, batteries, and mounting hardware in our trucks. When an OEM part is backordered or the price doesn’t make sense for an older unit, we’ll offer a quality aftermarket equivalent and tell you the difference before any money changes hands. Our bias is repair over replacement. If the opener is sound and the gate is misaligned, we fix the gate. We cover our San Bernardino service area with trucks that leave the shop stocked for these specific calls.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in San Bernardino
Every job gets quoted and agreed upon before we start. No surprises on the invoice. Here’s what Mighty Mule work typically runs in San Bernardino:
- Diagnostic service call: $75 to $125, credited toward the repair if you proceed.
- Limit switch adjustment or re-teaching: $85 to $150.
- Control board replacement: $180 to $340, including the board.
- Swing arm or actuator replacement: $200 to $400, parts included.
- Post reset and re-concrete with gate realignment: $350 to $800, depending on gate size and post condition.
What drives the cost here is usually the ground work. If your post has shifted, fixing it properly takes longer than slapping on a new arm. A free estimate tells you which path you’re on. Call (855) 707-3634 and we’ll give you an exact number.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in San Bernardino
Heat expands the gate and the metal hardware, which tightens clearances and increases the load on the opener. If your post has shifted even slightly, that afternoon expansion is enough to make the arm fight back. We test for thermal bind by running the gate at the hottest part of the day and measuring motor current draw. Call (855) 707-3634 and we’ll diagnose it on-site.
Sometimes yes, sometimes no. If the surge took out the onboard fuse or a replaceable relay, we can repair it. If the microcontroller is burned, the board needs replacement. We carry genuine Mighty Mule boards for the MM371W, MM572W, FM200, and FM500, so the fix usually happens the same day. Call (855) 707-3634 for a diagnosis.
Winter rain softens the sandy soil around your gate posts, and the gate sinks or shifts just enough to drag. That’s a soil and footing problem, not an opener problem. We reset the post in concrete and realign the gate, which stops the drag at its source. Call (855) 707-3634 for a free estimate on the ground work.
Yes. We install Mighty Mule operators on existing wrought-iron driveway gates across San Bernardino. The process includes checking the gate for plumb and square before we mount the opener, because a crooked gate will kill a new opener in months. We handle the full electric gate repair scope: power run, control board, safety edges, and limit setup. Need Mighty Mule repair in Loma Linda? We cover that too.
Corrosion and dust intrusion. Fine grit works into the remote housing and keypads, and the temperature swings cause connections to fail. We clean and re-seal the units, replace batteries, and reprogram the receiver. If the receiver itself is done, we stock replacements. Call (855) 707-3634 and we’ll get your remotes working again.
Service Areas Near San Bernardino
We run Mighty Mule service into the neighborhoods and cities around San Bernardino, including Rancho Cucamonga, Claremont, Pomona, San Antonio Heights, and La Verne. If you’re just outside our San Bernardino ZIPs, call and ask; we’re usually able to schedule you. We also provide dedicated Mighty Mule service in Woodcrest and Mighty Mule service in Anaheim.
Book Your Mighty Mule Service in San Bernardino Today
If your Mighty Mule opener is stalling, dragging, or dead, call us. We’ll diagnose the root cause on-site, quote the repair before any work begins, and get your gate back in operation. Reach Ontario Gate Company at (855) 707-3634 for a free estimate.
Written by Noel Carrasco, Owner at Ontario Gate Company, serving San Bernardino and the Inland Empire.