Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Redlands, CA
Gate installation in Redlands means working around a century of architectural character. The historic core runs on original wrought iron, hand-built wood gates, and 1920s concrete that has shifted with the expanding clay soil beneath it, while newer east-side neighborhoods in 92374 have standard ornamental iron and vinyl systems. Ontario Gate Company has served Redlands since 2011, and we specialize exclusively in gates: installation, repair, and electric automation across both the old and the new. If a gate needs to hold its line, latch clean, and survive a Redlands summer, give us a call at (855) 707-3634.
Why Redlands Homes Are Different
Redlands wears its history on every block. The Craftsman and Victorian homes around Prospect Park and Smiley Park were built in an era when a gate was part of the house, not an aftermarket bolt-on. Many of those original wood and wrought-iron gates are still standing, and they fight a climate that tests them every year. Summer days routinely cross 100°F, which bakes the moisture out of wood until stiles bow and rails pull away from their joinery. Then the Santa Ana winds arrive and force every hinge, latch, and post to take a load it was not sized for. In the historic districts, gate posts were often set directly into original 1920s concrete. Redlands’ expansive clay soil swells and shrinks with the seasons, so that concrete has moved. A gate that latched perfectly in March can sag and stick by July, and the cause is usually below ground, not in the hardware.
The newer developments on the east side have their own profile. Standard ornamental iron and vinyl gates are lighter and less affected by soil movement, but the dry Inland Empire air accelerates rust on unprotected steel, and vinyl gate posts can warp under direct summer sun if they were not reinforced. There is no single Redlands gate problem. There is a set of them, and they follow the age of the house.
Styles & brands we work with
Our Main Redlands Services
Two services account for most of the calls we take in Redlands: mechanical gate repair and electric gate repair. Here is what each one involves in this city.
Gate Repair in Redlands
Most mechanical gate failures in Redlands are old-age problems: hinges that have worn egg-shaped, sagging wood stiles, latches that no longer line up, and posts that have drifted with the clay soil. On the historic side of town, we repair period wood and wrought-iron gates in place whenever the structure allows it, which matters when the gate matches a 1910s fence line. The dry climate also means rust moves fast on unprotected steel hardware, so we inspect every hinge, latch, and bracket, not just the part that failed. Your gate gets diagnosed on-site, with the actual cause confirmed before any work is quoted. Learn more on our Gate Repair in Redlands page.
Electric Gate Repair in Redlands
An electric gate that will not open is a different animal. Redlands heat kills control boards faster than mechanical parts, and Santa Ana-driven power fluctuations are hard on operator electronics. We work on operators from Viking, Ghost Controls, DoorKing, Elite, and other major brands, and we arrive already knowing the common failure points of each manufacturer’s system. That means less time spent guessing and fewer parts replaced on a hunch. If your gate uses an automatic opener, a loop detector, or a keypad, that part of the job is covered in depth on our Electric Gate Repair in Redlands page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Redlands
A new gate in Redlands has to satisfy two masters: the look of the street and the physics of the local soil. The historic core favors wood and wrought iron that read as original to a 1920s lot, while the east side runs toward ornamental iron and vinyl. Big swings between wet winters and 100°F summers will test every post embedment and every welded joint within the first year. Here is what a new installation actually involves, and what it costs, in this market. For a deeper look at the service itself, visit our Gate Installation page.
Automatic Gate Installation
Signs you need it
You want vehicle or pedestrian access without getting out of the car, or you need to control who enters the property.
What it costs in Redlands
Automatic gate installation in Redlands typically runs $1,300 to $2,500 for the operator and $160 to $400 for the gate, before site conditions are priced in.
How we do it
We set the gate and posts for the operator’s weight, mount the operator on a reinforced pad or post, and run the control wiring and safety sensors to manufacturer spec.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the hinges, sagging into the drive path, or the posts have shifted too far to rehang it.
What it costs in Redlands
Driveway gate installation in Redlands typically runs $900 to $2,800 for the gate structure and $160 to $400 for the gate itself, depending on width and material.
How we do it
We pull the old posts when needed, dig new footings below the clay movement line, set steel-reinforced posts, and hang the gate to swing or slide true on its hardware.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or the gate opening has no room for a swing arc.
What it costs in Redlands
Sliding gate installation in Redlands typically runs $1,300 to $2,500 for the operator and $430 to $700 for the gate’s steel components.
How we do it
We lay the track on a level run, build the cantilever or tracked slider frame, and set the receiver post and stops so the gate carries its own weight without dragging.
What Gate Installation Costs in Redlands
| Item | Typical range in Redlands |
|---|---|
| Gate structure and posts | $900 – $2,800 |
| Operator and access controls | $1,300 – $2,500 |
| Gate material (wood, iron, or vinyl) | $160 – $400 |
Will an automatic gate work on a sloped Redlands driveway?
Yes, if the gate type matches the slope. A swinging gate on a steep rise will hit the ground, so we spec a sliding or cantilever gate there instead. The track run gets leveled independently of the driveway, and the operator is sized for the gate’s full travel weight.
Do Redlands historic districts restrict what a new gate can look like?
Some areas with historic designation do review exterior changes, including gates visible from the street. The approval usually follows the existing material language, wood or wrought iron in period profiles, rather than banning new work outright. We size the gate to what the district will accept before any steel gets cut.
Brands We Service in Redlands
We work on operators and control systems from Viking, Ghost Controls, DoorKing, and Elite, plus the rest of the major gate-brand lineup. Our trucks carry the boards, loops, and safety sensors those systems use most, so most Redlands repairs finish without waiting on a parts run. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Redlands, CA
| Service | Typical range in Redlands |
|---|---|
| Gate repair (labor and common parts) | $220 – $450 |
| Electric gate repair (control board) | $250 – $600 |
| Electric gate repair (operator arm or motor) | $300 – $650 |
| Gate opener repair (standard swing operator) | $350 – $650 |
| Gate opener repair (commercial slide operator) | $800 – $2,500 |
| Gate spring repair (heavy-duty or tension) | $280 – $500 |
| Gate lubrication and tune-up (standard swing) | $175 – $300 |
| Gate gate replacement only | $350 – $900 |
| Automatic gate installation | $1,300 – $2,500 |
| Driveway gate installation | $900 – $2,800 |
In Redlands, two things push a gate job past the base range: post work in the old clay soil, which often means deeper footings and epoxy-set anchors, and any gate that has to be custom-sized to fit a historic opening. Every job gets a written price before work starts, and that number is the number you pay.
Neighborhoods We Serve in Redlands
We cover all of Redlands, from the pre-1930s homes around Prospect Park and Smiley Park out to the newer subdivisions in 92374, and across 92373 and 92375. Response in these areas is typically same-day for emergency gate failures and next-day for scheduled installation work.
- Prospect Park
- Smiley Park
- Downtown Redlands
- South Redlands
- North Redlands
Service Area – Cities Near Redlands
Our Redlands crews also cover the smaller cities just outside the city line. We work regularly in Mentone, CA and Loma Linda, CA, and we take installation and repair calls in Highland, CA and Colton, CA as well. If you are near the border, call and we will confirm the run.
Serving Redlands, CA — Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Redlands
For an electric gate that has failed and is blocking vehicles, we aim for same-day dispatch across Redlands, including 92373, 92374, and 92375. Call early and we can usually have a technician out that afternoon. A gate jammed open is a security problem, and we treat it as urgent.
Some Redlands HOAs, especially in the newer east-side communities, require design review before a gate changes. Redlands’ historic districts may also have exterior-review rules. We know the local requirements and can tell you during the estimate what to file and what goes through without paperwork.
Both. Our Redlands work runs from single-family driveway gates in the historic districts to commercial slide operators and access-control systems. If it is a gate, and it opens or closes, we service and install it. We specialize exclusively in gates, which is the whole point.
For a free estimate on gate installation, repair, or electric gate work in Redlands, call Ontario Gate Company at (855) 707-3634. The price is quoted and agreed before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redlands Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ramon Rodriguez"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Nabil Karam