Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Yucaipa, CA
Gate installation in Yucaipa means building for heat, wind, and wide-open lots, not just dropping a panel between two posts. Most of the work we do here is on acreage properties and horse parcels where the gate has to hold livestock, survive Santa Ana gusts, and open smoothly off a long dirt driveway. If your gate is sagging, off its track, or the opener stopped listening, call (855) 707-3634. We’re Ontario Gate Company, and we work exclusively on gates.
Why Yucaipa Homes Are Different
Yucaipa’s gate work follows the land. On the eastern edge toward the Crafton Hills, gates sit at the end of unpaved ranch drives, often 12 to 16 feet wide, framed in heavy pipe rail, and hung on posts that have been baking in 100-degree summers for twenty years. Heat expands steel. Wind gusts that funnel through the foothill canyons push against a gate’s full face. Dust from dry summers gets into roller tracks and chains. That combination, repeated season after season, is why welds crack, hinges drop, and openers overwork themselves on gates that were never rebalanced after the soil shifted.
The older ranch homes and livestock-zoned parcels spread across the Yucaipa Valley floor need more than a gate that looks right. On those properties, a gate is the only thing between a horse and a county road. A sagging latch or a misaligned photo eye is an animal-escape risk. The newer tract developments on the west side have their own issues, mostly undersized operator arms and shared fence lines where a gate failure means a conversation with the neighbor. We approach each job by looking at the gate as it works on that specific property, not as a generic swing panel.
Styles & brands we work with





Our Main Yucaipa Services
Most calls we answer in Yucaipa fall into two categories: mechanical gate failures and electric operator or automation problems.
Gate Repair in Yucaipa
Bent hinges, sagging frames, stuck rollers, broken welds, gates that drag across the ground at the latch end. On ranch drives these failures age faster because the gate is heavier and the wind loads are constant. We repair the frame and hardware, reset the swing, and get the gate moving cleanly again, and we replace worn parts with components spec’d for the width and weight of your specific gate. Gate Repair in Yucaipa covers the full range of mechanical fixes on residential and ranch gates.

Electric Gate Repair in Yucaipa
When an opener runs but the gate doesn’t move, or the gate moves but won’t stop in the right place, the problem is usually in the control board, the limit switches, a safety sensor, or the motor itself. Dust and heat are hard on electronics, and Yucaipa’s long driveways mean operators get cycled more than a standard tract-home gate. We diagnose on-site, test each component, and carry boards and parts for the brands most common around here. Electric Gate Repair in Yucaipa details what we check and fix.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Yucaipa
New gate installation in Yucaipa means sizing the gate and operator for a 14-foot ranch entry or a wide driveway on a horse lot, not a 6-foot pedestrian opening. The structure has to handle direct summer sun on steel, high wind pressure during Santa Ana events, and daily cycling on dust-exposed tracks. Our crews square the posts, build the frame for the weight it actually carries, and set the automation so it works from day one without over-straining the motor. We handle everything from the first site measurement to programming your remotes and safety sensors. If you’re planning a new driveway entry or replacing a gate that’s outlived its posts, see our full Gate Installation service page for orientation details.
Driveway Gate Installation
Signs you need it
Your current gate sags past the latch point, the hinges are wallowed out, or the driveway width has changed with a new vehicle or trailer.
What it costs in Yucaipa
Driveway gate installation in Yucaipa typically runs $1,400 to $4,900 depending on width, material, and automation.
How we do it
We measure the opening and grade, set new posts in concrete at the correct depth for your soil, hang the gate square, and install the opener with all safety edges and receivers wired and tested.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close a wide gate on a busy road or in bad weather, and you want the gate to work from the cab instead.
What it costs in Yucaipa
Automatic gate installation in Yucaipa typically adds $1,100 to $3,000 to the gate itself, depending on operator type and power access.
How we do it
We select an operator matched to the gate’s weight and cycle rate, run power from the nearest source, mount and calibrate the arm or slide motor, then program remotes, keypads, and safety sensors.
Sliding Gate Installation
Signs you need it
Your property slopes steeply or the driveway space doesn’t allow a gate that swings inward or outward.
What it costs in Yucaipa
Sliding gate installation in Yucaipa runs higher than swing gates due to the track and hardware, typically $2,200 to $6,200.
How we do it
We pour the track base with the right reinforcement for the gate’s travel, set the rails and rollers, hang the gate, and set the slide operator with proper limits and obstruction sensors.
What Gate Installation Costs in Yucaipa
| Item | Typical range in Yucaipa |
|---|---|
| Basic driveway gate | $1,400 – $2,500 |
| Gate with automation (swing or slide) | $2,500 – $4,900 |
| Wide ranch or estate gate with operator | $4,000 – $6,200 |
How long does gate installation take in Yucaipa?
Most residential gate installations take one to two days once materials are on site. Custom ranch gates that need concrete work and power trenching can run three to four days.
Do I need a permit to install a gate in Yucaipa?
Many rural properties in Yucaipa don’t require a permit for a gate, but automated gates near the roadway may need to meet setback and safety requirements. We’ll confirm the current rules for your specific parcel before site work begins.
Brands We Service in Yucaipa
We service BFT, Linear, Viking, and Ghost Controls equipment regularly in Yucaipa, along with the broader brand line we carry. We keep common boards, remotes, safety sensors, and edge kits stocked for faster turnaround when a failure is diagnosed. See our brands for the full list and what each system typically needs.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Yucaipa, CA
| Service | Typical range in Yucaipa |
|---|---|
| Gate repair (minor mechanical) | $185 – $450 |
| Gate repair (major frame or weld) | $500 – $1,200 |
| Electric gate diagnostic | $120 – $250 |
| Control board replacement | $350 – $900 |
| Operator motor replacement | $550 – $1,300 |
| Safety sensor or photo eye replacement | $150 – $350 |
| Basic driveway gate installation | $1,400 – $2,500 |
| Automated gate installation | $2,500 – $4,900 |
| Sliding gate installation | $2,200 – $6,200 |
| Gate opener install on existing gate | $1,100 – $3,000 |
What pushes a Yucaipa quote higher is the wide gate widths, heavy pipe-rail construction, and the extra work of running power to a gate that sits 200 feet from the house. Every job is priced upfront and agreed before any work starts.
Neighborhoods We Serve in Yucaipa
We work across the Yucaipa Valley, from the acreage parcels on the east side to the tract developments near the 10, and the rural roads climbing toward the Crafton Hills.
- North Bench
- Chapman Heights
- Dunlap Acres
- Bryant Street area
- Oak Glen corridor
Response times vary by distance and call load, but most Yucaipa repair visits can be scheduled the same week, with diagnostics done on-site before anything gets taken apart.
Service Area – Cities Near Yucaipa
Ontario Gate Company runs repair and installation crews through Calimesa, CA and Mentone, CA on the way into Yucaipa, and we cover the ranch roads and hillside lots in Redlands, CA and Banning, CA for the same style of heavy gate work.
Serving Yucaipa, CA — Our Local Coverage Area
We’re based in the Yucaipa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yucaipa
We schedule repair calls in Yucaipa based on urgency and route. A gate that won’t open at all gets priority, and we usually arrive within a few business days. Call the office and we’ll give you the next available window for your part of Yucaipa.
Some tract developments on the valley floor have HOA design rules for gate height, color, and materials. Rural parcels generally follow county setback rules rather than HOA rules. We confirm the restrictions for your specific property before quoting.
Yes. We regularly repair and automate pipe-rail and tube gates on horse properties in Yucaipa, including gates that see daily animal pressure. The repair has to hold up to horses leaning on it, so we check hinges, latches, and post anchors before calling a gate fixed.
If your Yucaipa gate needs a repair, a new opener, or a full replacement, call Ontario Gate Company at (855) 707-3634 for a free estimate. We’ll tell you what’s wrong, what it costs, and what we’ll do to fix it before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Yucaipa Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah