Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Campo, CA
Gate installation in Campo usually means a long driveway entrance on a multi-acre parcel, often a ranch-style swing or sliding gate built to hold up against high-desert wind and dust. Most of the work we do here is either new installation on raw or poorly graded ground, or replacement of a hand-built pipe-and-wire gate that has sagged beyond repair. We specialize exclusively in gates, so when we quote a Campo job we’re looking at the same soil, wind, and livestock pressures you deal with every day. Call (855) 707-3634 for a free estimate on a new gate system for your property.
Why Campo Homes Are Different
Campo sits high and dry in the far southeastern corner of San Diego County, right along Highway 94 and hard against the Mexico border. This is unincorporated country: large parcels, long driveways, and property lines marked with pipe-and-wire or ranch-style gates more than decorative iron. The housing stock here is mostly single-family homes on multi-acre lots, manufactured homes, and custom ranch properties. That means gate work is about security, privacy, and keeping livestock where they belong, not curb appeal.
The climate does real work on gate hardware. Campo gets strong, sustained winds that carry sand and dust into every hinge, roller, and operator housing. Intense sun bakes powder coat off steel and dries out wood gates until they crack and pull away from their frames. Summer heat swings the ground, and occasional monsoon moisture makes it move more. What we see over and over in Campo is not the gate itself failing first: it’s the posts shifting in sandy or rocky soil, which throws the gate out of square and then wears out hinges, rollers, and operators from the stress. Repairs here often begin with setting and reinforcing a post before we ever touch a hinge.
Styles & brands we work with
Our Main Campo Services
Most Campo property owners reach out to us for one of two reasons: a gate that has stopped moving, or an electric operator that no longer opens the gate reliably. Both come with their own Campo-specific challenges.
Gate Repair in Campo
A ranch gate in Campo takes a beating from wind, livestock, and the same shifting soil that plagues every fence line out here. We regularly repair sagging pipe gates, broken hinges, and posts that have leaned out of true after a few seasons of monsoon moisture. If you’ve been propping your gate open with a rock, that’s our cue. Gate Repair in Campo covers everything from re-hanging an old farm gate to rebuilding a post footing in sandy ground.
Electric Gate Repair in Campo
When your gate opener stops responding, the fix often starts at the control board or a blown safety sensor, not the motor. Campo’s dust and temperature swings are hard on electronics, and we diagnose electric gates on-site rather than guessing over the phone. Electric Gate Repair in Campo covers operators, loop detectors, safety edges, and access-control wiring for driveway gates across the 91906 ZIP code.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Campo
New gate installation in Campo usually means a long driveway entrance on open, often ungraded ground, where the gate has to hold up to wind, heat, and the occasional livestock push. Most properties here are single-family homes on multi-acre parcels, and many already have an old pipe-and-wire gate that has done its time. Our job is to install a gate and operator system engineered for this climate, with posts set deep enough to resist the shifting sandy and rocky soil that makes Campo posts lean. We specialize exclusively in gates, not fences and not general contracting, so every part of this job is done by people who install gates for a living. As a full-lifecycle gate company, we can also handle Gate Installation on any property, from a simple manual ranch gate to a full automated driveway system.
Automatic Gate Installation
Signs you need it
You’re opening and closing your gate by hand multiple times a day, or you want controlled access without leaving the truck.
What it costs in Campo
Automatic gate installation in Campo typically runs $4,800 to $9,600 for a full residential operator, gate, and post package.
How we do it
We survey your driveway grade and soil, set reinforced posts, mount the gate, install the operator, and run power and safety sensors before testing full open-close cycles.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags, drags on the ground, or no longer keeps livestock or vehicles where they belong.
What it costs in Campo
A new driveway gate in Campo typically costs $2,500 to $7,500 including the gate, hinges, and post hardware, with automation adding to the total.
How we do it
We match the gate width and weight to your driveway opening, set posts in concrete below the frost and sand line, hang the gate, and align it for years of wind exposure.
What Gate Installation Costs in Campo
| Item | Typical range in Campo |
|---|---|
| Manual driveway gate (installed) | $2,500 – $7,500 |
| Automatic gate system (gate + operator) | $4,800 – $9,600 |
| Full custom ranch gate with automation | $7,000 – $14,000 |
Campo’s long driveways and sandy post holes often push materials and labor toward the upper end of those ranges, and we always quote a firm price before any work begins.
How long does gate installation take in Campo?
Most Campo installations take one to two full days on-site, depending on automation, grading, and how much post reinforcement the soil demands. You’ll have a written timeline before we start.
Do you handle the concrete and post work for Campo gates?
Yes. We set every post ourselves in concrete, and in Campo we typically dig deeper than standard because the ground shifts with heat and monsoon moisture. Post work is part of the installation price.
Brands We Service in Campo
We service operators from BFT, Linear, Viking, and Ghost Controls, among others, and our technicians are trained on each brand’s common failure points. That means a Campo service call usually starts with the right diagnostic gear and often the right part already on the truck. Our brands page details the full range we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Campo, CA
| Service | Typical range in Campo |
|---|---|
| Gate repair (labor, minimum service call) | $95 – $180 |
| Gate repair (full job, parts + labor) | $180 – $575 |
| Operator replacement | $1,200 – $3,400 |
| Control board replacement | $450 – $1,500 |
| Safety sensor replacement | $195 – $585 |
| Hinge or roller replacement | $150 – $485 |
| Electric gate repair (labor, minimum) | $120 – $280 |
| Electric gate repair (full job) | $240 – $950 |
| Manual driveway gate (installed) | $2,500 – $7,500 |
| Automatic gate system (gate + operator) | $4,800 – $9,600 |
In Campo, the biggest price drivers are long driveway runs for power, sandy ground that needs deeper post footings, and wind-rated hardware. Whatever the job, the price is quoted and agreed before any work starts, so the number you hear is the number you pay.
Neighborhoods We Serve in Campo
Campo covers the full 91906 ZIP code, from the Highway 94 corridor out to the ranch roads that dead-end into open country. We’re familiar with the dirt entrances, gate styles, and soil conditions across the area.
- Central Campo along Highway 94
- Lake Morena area
- Campo Valley ranch parcels
- Boulevard-adjacent rural properties
- Remote parcels off Church Road
Response time across Campo is typically next-day for non-emergency calls, and we do our best to route out this way on a regular weekly schedule.
Service Area – Cities Near Campo
Ontario Gate Company serves Campo and the surrounding high-desert and mountain communities across southeastern San Diego County. If you’re just up the road in Pine Valley, CA, over in Descanso, CA, or down toward Alpine, CA, we cover those areas too. We also take calls in Harbison Canyon, CA. Same gate-only focus, same trained technicians.
Serving Campo, CA — Our Local Coverage Area
We’re based in the Campo area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Campo
We route Campo calls on a regular weekly schedule, so most non-emergency repairs happen within a couple of days. If your gate is stuck open or your livestock is getting out, tell us when you call and we’ll move you up. Call (855) 707-3634 to check current routing.
Permit requirements in unincorporated Campo depend on the gate’s height, its distance from the road, and whether it’s automated. We’ll confirm what’s needed for your specific parcel before we quote, so there are no surprises with the county.
We work on both. A large share of Campo’s gates were welded or assembled on-site over the years, and we repair and reinforce those as often as we install new manufactured gates. If the steel is sound, we can usually get it swinging true again.
If your Campo gate needs work, call (855) 707-3634 for a free estimate. We’ll diagnose the problem on-site and quote a firm price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Campo Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Karen Chen"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Adam Whitaker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Riya Shah